Introduction
Welcome to your new FLEXISPOT EN1 standing desk. This manual provides essential information for the safe assembly, operation, and maintenance of your height-adjustable desk. Please read these instructions thoroughly before use to ensure proper functionality and longevity of your product.
Image: A visual comparison highlighting the enhanced stability of a single-piece desktop design, as featured on the FLEXISPOT EN1 desk, versus a two-piece desktop.
Коопсуздук маалыматы
This desk has a maximum weight recommendation of 154 lbs. Improper use may result in injury. Always ensure the desk is stable and does not wobble during height adjustments. Transitioning between sitting and standing positions should be done carefully to avoid injury. Prolonged sitting can lead to health issues, so consider taking regular breaks to stand or walk.
Пакеттин мазмуну
Before assembly, verify that all components are present. Refer to the packing list provided with your product. Ensure all parts are undamaged before proceeding with assembly.
Сүрөт: An overview of the FLEXISPOT EN1 standing desk, showcasing the desktop, legs, and control panel as main components.
Монтаждоо көрсөтмөлөрү
Assembly typically requires two people. Follow the step-by-step guide included in your product packaging for detailed instructions. Ensure all screws are tightened securely to maintain stability.
- Attach the lifting columns to the desktop using the provided hardware.
- Secure the foot supports to the base of the lifting columns.
- Башкаруу панелин орнотуп, бардык керектүү кабелдерди моторго жана кубат булагына туташтырыңыз.
- Perform initial calibration as per the control panel instructions to ensure proper height adjustment range.
Image: The FLEXISPOT EN1 standing desk fully assembled in a home office environment, ready for use.
Иштөө нускамалары
Башкаруу панелиview
The desk features a programmable control panel for precise height adjustment and convenient memory presets.
Сүрөт: жакын план view of the programmable control panel, indicating buttons for up/down adjustment, an LED display, and four memory preset buttons.
Бийиктикти тууралоо
- басып, кармап туруңуз Up столду көтөрүү үчүн жебе баскычы.
- басып, кармап туруңуз Төмөн столду төмөндөтүү үчүн жебе баскычы.
- Release the button to stop the desk at your desired height.
Эстутумдун алдын ала жөндөөлөрүн орнотуу
- Adjust the desk to your preferred height for a specific position (e.g., sitting or standing).
- басыңыз 'М' button (or the designated memory set button).
- 3 секунддун ичинде сан баскычтарынын бирин басыңыз (1, 2, 3 же 4) учурдагы бийиктикти ошол алдын ала коюлганга сактоо үчүн.
- Сакталган бийиктикти кайра чакырып алуу үчүн, жөн гана тиешелүү сан баскычын басыңыз. Үстел автоматтык түрдө сакталган абалга жылат.
Initializing/Resetting the System
If the desk does not respond, displays an error code, or operates abnormally, a system reset may be required. Consult the full user manual for specific reset procedures. Typically, this involves holding down certain buttons (often the 'Down' button or 'M' button) until the desk moves to its lowest position and resets its calibration.
Техникалык тейлөө
- Regularly check all screws and bolts to ensure they are tight. Loose connections can affect stability and performance.
- Жумушчу столдун бетин жумшак, d менен тазалаңызamp кездеме. Абразивдүү тазалагычтарды же финишке зыян келтирүүчү катаал химиялык заттарды колдонуудан алыс болуңуз.
- Keep the motor and electrical components free from dust and moisture. Do not spray liquids directly onto the desk's electrical parts.
- Do not exceed the maximum weight capacity of 154 lbs to prevent damage to the lifting mechanism.
Image: A clean and organized FLEXISPOT EN1 desk setup, illustrating proper care and maintenance of the workspace.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Иш стол кыймылдабайт. | Power cable disconnected; desk overloaded; system error. | Check all power connections. Reduce weight on the desk. Perform a system reset as described in the operating instructions. |
| Desk moves unevenly or wobbles. | Loose assembly connections; uneven floor surface; unbalanced weight distribution. | Tighten all assembly screws. Adjust the foot levelers to stabilize the desk on uneven floors. Redistribute items on the desktop evenly. |
| Ката коду башкаруу панелинде көрсөтүлөт. | Indicates a specific system malfunction. | Refer to the complete user manual for a list of error codes and their corresponding solutions. Often, a system reset can resolve minor errors. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | FLEXISPOT |
| Модель номери | 156E |
| Продукциянын өлчөмдөрү (D x W x Y) | 24"D x 40"W x 46.3"H |
| Иш тактасынын көлөмү | 40x24" WholePiece |
| Түс | Ак |
| Минималдуу бийиктик | 28 дюйм |
| Максималдуу бийиктик | 47.6 дюйм |
| Максималдуу салмак боюнча сунуш | 154 фунт |
| Негизги материал | Steel, Reclaimed Wood |
| Жогорку Материал түрү | Инженердик жыгач |
| Көтөрүү механизми | Standard Two Button Controller |
| Memory Presets | 4 |
| Элемент Салмагы | 56 фунт |
| Керектүү Ассамблея | Ооба (2 адам сунушталат) |
| UL тизмеленген | Ооба |
Image: A diagram illustrating the key dimensions of the FLEXISPOT EN1 standing desk, including desktop width (40"), depth (24"), and the adjustable height range.
Кепилдик жана колдоо
The FLEXISPOT EN1 standing desk comes with a 1-year manufacturer's warranty covering parts. For warranty claims, technical support, or assistance with any issues, please contact FLEXISPOT customer service directly.
You can find more information and support resources on the official FLEXISPOT webсайт: www.flexispot.com
