Flysky SM100 RC учуу симуляторунун кабелдик колдонмосу

1. Киришүү

This manual provides detailed instructions for the installation and operation of your Flysky SM100 RC Flight Simulator Cable. This cable is designed to connect your compatible Flysky remote controller to a personal computer for use with various flight simulator software, enhancing your RC flying skills in a virtual environment.

The SM100 simulator cable supports a range of Flysky transmitters and is compatible with Windows operating systems. It converts the PPM signal from your transmitter into a format recognizable by flight simulator software.

2. Коопсуздук маалыматы

• Ensure all connections are secure before powering on any devices.
• Do not expose the cable or adapters to moisture or extreme temperatures.
• This product is designed for use with Windows operating systems (including Windows 10). It is NOT compatible with Mac systems.
• Always handle your remote controller and computer with care.

3. Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

• 1 x USB Simulator Cable
• 2 x Adapter Cables (various connector types for compatibility)

The package includes the main USB cable and two different adapter cables to ensure compatibility with various remote controller trainer ports.

4. Орнотуу колдонмосу

4.1. Системалык талаптар

• Операция системасы: Windows (including Windows 10). Not compatible with Mac systems.
• Процессор: Intel Pentium 600 or above.
• Графикалык карта: 32MB AGP-3D Graphics Card.
• RAM: 128 МБ RAM.
• Катуу диск: 10GB HDD or above.
• Оптикалык диск: 52X CD-ROM (if installing software from disc).

4.2. Программалык камсыздоону орнотуу

1. Драйверлерди жүктөп алыңыз: Obtain the necessary drivers for the SM100 simulator cable from the official Flysky website or the provided software disc.
2. Download FMS Software: Download and install a compatible flight simulator software, such as FMS (Flight Model Simulator), VRC PRO, FPV Freerider, Aerofly RC 7, Next RC, Clearview RC, Betaflight, or DRL.

4.3. Кабелди туташтыруу

1. Connect Adapter to Transmitter: Select the appropriate adapter cable for your Flysky remote controller's trainer port. Connect one end of the adapter cable to the trainer port on your transmitter.
2. Connect USB Cable to Adapter: Connect the 3.5mm jack of the main USB simulator cable to the other end of the adapter cable.
3. Connect USB to PC: Plug the USB end of the simulator cable into an available USB port on your computer. The red LED on the USB connector should blink rapidly, indicating a connection.

4.4. Verifying Connection and Calibration

1. Түзмөк башкаргычын текшерүү: On your Windows PC, open 'Devices and Printers' or 'Device Manager'. The system should recognize the simulator cable as a 'PPM' device.
2. Calibrate in Simulator Software: Launch your chosen flight simulator software (e.g., ClearView). Navigate to the controller setup or calibration section. Select 'PPM' as the input device. Follow the on-screen instructions to calibrate your transmitter sticks and switches. This typically involves moving all sticks through their full range of motion and centering them.

5. Иштөө нускамалары

Once the simulator cable is connected and calibrated, you can begin using your remote controller with the flight simulator software. The software will interpret your controller inputs as if you were flying a real RC model.

• Familiarize yourself with the simulator's controls and settings.
• Practice basic maneuvers, take-offs, and landings to build muscle memory and improve coordination.
• Experiment with different aircraft models and flying environments available in the simulator.

6. Шайкештик

The Flysky SM100 simulator cable is compatible with the following Flysky remote controllers:

• FS-i10
• FS-i6
• FS-i4
• FS-TH9X
• FS-T6
• FS-CT68
• FS-T4B
• FS-GT3C
• FS-GT3
• FS-GT2F
• FS-GT2G
• FS-GT3B
• FS-GT2

Эскертүү: Бул буюм туура келбейт with the FLYSKY TS-i6 transmitters.

7. Техникалык шарттар

8. Кыйынчылыктарды

• Simulator Software Not Recognizing Controller:
  Ensure the drivers for the SM100 cable are correctly installed. Verify that the cable is securely connected to both the PC and the remote controller. Check your simulator software's controller settings to ensure 'PPM' or the correct input type is selected and calibrated.
• Red LED Not Blinking:
  Confirm the USB cable is fully inserted into a working USB port on your computer. Try a different USB port. Ensure the adapter cable is correctly connected to the remote controller.
• Unstable Control Inputs:
  Recalibrate your remote controller within the simulator software. Ensure there are no conflicting drivers or software running in the background.
• Not Working on Mac:
  This product is explicitly designed for Windows operating systems and is not compatible with Mac.

9. Кепилдик жана колдоо

For warranty information, technical support, or further assistance, please refer to the official Flysky webсайтка же сатуучуга кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.