1. Киришүү
This manual provides comprehensive instructions for the installation, operation, and maintenance of your BTF-LIGHTING SP601E Bluetooth LED Controller. This controller is designed for use with addressable LED pixel strip lights such as WS2812B, WS2811, and 1903 types, offering dual signal output, music synchronization via a built-in microphone, and versatile control options.
2. Коопсуздук маалыматы
- электр менен жабдууну камсыз кылуу voltage жумушчу томго дал келетtage of your LED lights (DC5V-24V). Using an incorrect voltage can damage the LED lights.
- Do not use a 12V or 24V power supply for 5V LED strips.
- Avoid lighting up full brightness white light for extended periods, as addressable RGB IC light strips are primarily designed for dynamic chasing таасирлери.
- Insufficient power supply can lead to controller malfunction, frozen colors, unresponsive remote control, and Bluetooth disconnection. Ensure adequate power for your LED project.
- Бул аппарат имараттын ичинде гана колдонууга арналган.
3. Продукт бүтүп калдыview
The BTF-LIGHTING SP601E is a versatile LED controller offering multiple control methods and advanced features for dynamic lighting effects.
3.1. Негизги өзгөчөлүктөрү
- Dual Signal Output Ports: Two independent output ports, each controlling up to 600 pixels (total 1200 pixels). Effects on one port do not impact the other.
- Камтылган микрофон: Captures ambient sound for music-synchronized lighting effects. Sensitivity is fixed.
- Көптөгөн башкаруу ыкмалары: Control via Android/iOS app ("Banlan X" or "SceneX"), RF remote control, or integrated 3-key buttons on the controller.
- Динамикалык эффекттер: 12 music lighting effects, 24 special effects, and 16 million monochrome options. Adjustable speed, brightness, and channel order.
- Убакыт функциясы: Set up to 5 timers for automated light strip operation.
- Топтун функциясы: Control up to 5 devices within one group.
- Эстутум функциясы: Retains settings in case of power-down.
- Түс калибрлөө: Adjust app color to match LED strip output.
3.2. Пакеттин мазмуну
- BTF-LIGHTING SP601E Bluetooth LED Controller
- RF Remote Controller
3.3. Controller and Remote Layout
4. Орнотуу
4.1. Аппараттык туташуу
- Connect LED Strips: Connect your compatible LED pixel strip lights (WS2812B, WS2811, 1903) to the dual signal output ports of the SP601E controller. Ensure correct polarity. The controller supports two independent channels.
- Кубат булагына туташтыруу: Connect a DC5V-24V power supply (5.5mm x 2.1mm DC connector) to the controller. The voltage of the power supply must match the operating voltagсиздин LED тилкелериңиздин e.
Маанилүү: If your LED light is 5V, use a 5V power supply. Never use 12V or 24V power with 5V LED lights to prevent damage.
- Күйгүзүү: Plug the power supply into a wall outlet. The LED strips should illuminate.
Video 1: SP601E Music Controller Setup. This video demonstrates the physical connection of the SP601E controller to LED strips and a power source, showing the initial setup and basic functionality of the lighting.
4.2. Колдонмону орнотуу жана туташуу
- Колдонмону жүктөп алуу: Издөө "Banlan X" or "SceneX" in the App Store (iOS) or Google Play Store (Android), or scan the QR code provided on the product packaging or in Figure 4.
Же болбосо, зыярат кылсаңыз болот https://download.ledhue.com/page/scenex/ for app download links.
- Bluetooth иштетүү: Смартфонуңузда Bluetooth иштетилгенин текшериңиз.
- Open App and Connect: Open the "Banlan X" or "SceneX" app. The app will search for the controller's Bluetooth signal. Select "SP601E" from the list of available devices to connect.
Video 2: SP601E/SP608E Controller App Control. This video demonstrates the process of connecting the controller via the app and adjusting various lighting parameters, including dynamic effects, static colors, and sensitivity settings.
5. Иштөө нускамалары
5.1. App Control (Banlan X / SceneX)
Once connected, the app provides comprehensive control over your LED strips.
- Каналды башкаруу: Turn individual channels (Channel 1, Channel 2) or all channels ON/OFF.
- Динамикалык эффекттер: Select from 12 music lighting effects and 24 special effects. Adjust speed, brightness, and effect length.
- Статикалык түстү жөндөө: Choose from 16 million colors. Adjust hue and saturation for precise color selection.
- Микрофондун сезгичтиги: The built-in microphone's sensitivity for music modes is fixed and cannot be adjusted via the app.
- Сахналарды сактоо: Save your preferred lighting effects to groups or select pre-defined group effects.
5.2. Controller Button Control
The controller features three physical buttons for basic operation:
- Кубат баскычы: Turns the controller and connected LED strips ON/OFF.
- Режим баскычы (M): Cycles through different lighting modes/effects.
- Speed Button (S): Динамикалык жарыктандыруу эффекттеринин ылдамдыгын тууралайт.
5.3. RF пульт
The included RF remote provides convenient wireless control.
- КҮЙГҮЗҮҮ/ӨЧҮРҮҮ: Power button to turn lights on or off.
- Кулпу/Ачуу: Press for 5 seconds to lock the remote.
- Жарыктык: Жарыктардын жалпы жарыктыгын тууралаңыз.
- Ылдамдыгы: Динамикалык эффекттердин ылдамдыгын тууралаңыз.
- Scene Auto: Cycles through pre-programmed scenes automatically.
- Scene Buttons (1-9): Directly select specific lighting scenes.
5.4. Color Calibration
If the colors displayed in the app do not match the actual output of your LED strip, use the color calibration feature within the app to synchronize them.
6. Техникалык тейлөө
- Keep the controller and remote clean and dry.
- Аппаратты экстремалдык температуранын же нымдуулуктун таасиринен сактаңыз.
- Do not attempt to open or repair the controller yourself, as this will void the warranty.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Controller loses control, colors frozen, remote unresponsive, Bluetooth disconnected. | Электр энергиясы жетишсиз. | Ensure your power supply provides adequate wattage for your LED strips. If the LED strip is progressively darker at the end, add voltage to the strip. |
| App color inconsistent with LED strip color. | Color calibration needed. | Use the color calibration function within the app to adjust. |
| LED strip effect is stuck or not changing. | Controller freezing or power issue. | Disconnect and reconnect power to the controller. Verify power supply adequacy. |
| Bluetooth аркылуу колдонмого туташуу мүмкүн эмес. | Bluetooth not enabled, app issue, or controller not discoverable. | Ensure Bluetooth is on. Close and reopen the app. Restart the controller. |
8. Техникалык шарттар
- Модел: SP601E
- Бренд: BTF-Жарыктандыруу
- Киргизүү көлөмүtage: DC5V-24V (via 5.5mm x 2.1mm DC power jack)
- Control Pixel Quantity: Max 600 pixels per port, 1200 pixels total (two ports)
- Supported ICs: SPI (TTL) Digital Signal WS2811, WS2812B, 1903, 16703 (Except SK6812 RGBW)
- Контролдоо ыкмалары: RF remote control, Bluetooth app control (Android/iOS), 3-key button control
- Музыка режими: Built-in microphone (fixed sensitivity)
- Жарык эффекттери: 12 music effects, 24 special effects, 16 million monochrome colors
- Өлчөмдөрү: 4 x 2.3 x 1.1 inches (Controller)
- Элемент Салмагы: 2.11 унция (0.06 килограмм)
- Ички/тышкы колдонуу: Үй ичинде гана колдонуу
- Камтылган компоненттер: RF алыстан башкаруучу
9. Колдоо жана кепилдик
For technical assistance or questions regarding power supply compatibility for your LED project, please contact BTF-LIGHTING customer support. Refer to your product packaging or the official BTF-LIGHTING webбайланыш маалыматы үчүн сайт.
This product comes with a standard manufacturer's warranty. Please retain your proof of purchase for warranty claims. Any unauthorized modification or improper use of the device will void the warranty.
