1. Introduction and Overview
The Paradox PMD2P is a Magellan Wireless PIR Motion Detector designed for use with Magellan wireless receivers/transceivers. This device features built-in pet immunity, making it suitable for environments with animals weighing up to 18kg (40 pounds). It incorporates advanced features such as automatic temperature compensation and an innovative energy-saving mode to optimize battery life.
The PMD2P is also equipped with a dual tamper mechanism, providing enhanced security by triggering an alarm if the front cover is removed or if the detector is dismounted from its wall installation.
Негизги өзгөчөлүктөрү
- Single-Optic PIR Motion Detector with Built-In Pet Immunity (up to 18kg / 40lb)
- Battery-Powered with an innovative three-minute energy save mode after two detections within a five-minute period.
- ALIVE Software ensures the alarm LED continues to display in energy save mode without compromising battery life.
- Эки Тamper Protection: An alarm/tamper is generated if the front cover is removed or if the detector is removed from the wall.
- Dual Element Sensor, Patented Auto Pulse Signal Processing, and Automatic Temperature Compensation.
- Coverage: 11m x 11m (35ft x 35ft) with up to 15m (50ft) for center beams and an 88.5° viewбурч.
- Wireless Range: 35m (115ft) with MG6160, MG6130, & MG6250; 70m (230ft) with MG5000, MG5050, & RTX3 in typical residential environments.
- Slide switch to select high or low sensitivity.
Сүрөт 1: Алдыңкы view of the PMD2P Motion Detector.
2. Орнотуу жана орнотуу
2.1 Пакеттен чыгаруу жана компоненттер
Before installation, ensure all components are present: PMD2P motion detector unit, mounting screws, and 3 AAA batteries (included).
2.2 Батареяны орнотуу
- Carefully open the front cover of the PMD2P unit.
- Батарея бөлүкчөсүн табыңыз.
- Insert 3 x AAA alkaline batteries, ensuring correct polarity (+/-).
- Алдыңкы капкакты бекем жабыңыз.
Note: The device requires 3 AAA batteries. Battery life expectancy will vary according to the amount of traffic (movement) detected. Higher traffic levels will lower battery life.
2.3 Монтаждоо боюнча көрсөтмөлөр
The PMD2P is designed for wall mounting. Choose a location that provides optimal coverage of the desired area, avoiding direct sunlight, heat sources, or areas with significant air drafts that could cause false alarms.
- Mount the detector at a height appropriate for its detection pattern and pet immunity feature.
- For the wall tamper removal feature to be functional, a screw needs to be inserted into the designated wall tamper hole during mounting.
- Монтаждоо бетинин туруктуу жана коопсуз болушун камсыз кылыңыз.
Figure 2: Side and Angled views for mounting reference.
3. Иштөө нускамалары
3.1 Кыймылды аныктоо
The PMD2P uses a Passive Infrared (PIR) sensor to detect changes in infrared radiation caused by movement within its detection zone. When motion is detected, the device transmits a signal to the connected Magellan wireless receiver/transceiver.
The detector has a coverage area of 11m x 11m (35ft x 35ft) with center beams extending up to 15m (50ft) and an 88.5° viewing angle. Its pet immunity feature prevents false alarms from animals weighing up to 18kg (40lb).
3.2 Energy Save Mode
To conserve battery life, the PMD2P enters an energy save mode after two detections within a five-minute period. During this mode, the ALIVE software ensures that the alarm LED continues to display without compromising battery life, providing visual confirmation of activity.
3.3 Сезимталдыкты жөндөө
A slide switch inside the unit allows you to select between high or low sensitivity settings. Adjust this setting based on your environment and specific detection needs to optimize performance and minimize false alarms.
Figure 3: PMD2P Detection Pattern.
4. Техникалык тейлөө
4.1 Батареяны алмаштыруу
When the batteries are low, the system will typically indicate a low battery condition. To replace the batteries:
- Open the front cover of the detector.
- Remove the old 3 x AAA alkaline batteries.
- Insert new 3 x AAA alkaline batteries, observing correct polarity.
- Алдыңкы капкакты бекем жабыңыз.
Эски батареяларды жергиликтүү эрежелерге ылайык жок кылыңыз.
4.2 Тазалоо
To ensure optimal performance, periodically clean the exterior of the PMD2P detector. Use a soft, dry cloth to wipe away dust and dirt. Do not use abrasive cleaners or solvents, as these can damage the unit.
Avoid touching the sensor lens directly, as fingerprints or smudges can affect detection accuracy.
5. Кыйынчылыктарды
5.1 Жалган сигналдар
- Экологиялык факторлор: Ensure the detector is not mounted near heat sources (vents, radiators), direct sunlight, or areas with strong air currents (e.g., open windows, fans).
- Үй жаныбарларынын иммунитети: Verify that pets are within the specified weight limit (up to 18kg / 40lb). If larger pets are present, consider adjusting the mounting height or sensitivity.
- Сезгичтикти орнотуу: Try adjusting the sensitivity switch to the 'Low' setting if false alarms persist.
5.2 No Detection
- Батарея деңгээли: Батареялардын түгөнүп калганын текшериңиз. Керек болсо аларды алмаштырыңыз.
- Тоскоолдуктар: Ensure there are no physical obstructions blocking the detector's field of view.
- Монтаждын бийиктиги: Confirm the detector is mounted at an appropriate height for optimal coverage.
- Зымсыз туташуу: Verify that the PMD2P is properly paired with its Magellan wireless receiver/transceiver and that the signal strength is adequate.
5.3 Тamper Сигнал
- Мукаба Тampэ: Ensure the front cover is securely closed.
- Wall Т.ampэ: If the detector was removed from the wall, re-mount it securely, ensuring the screw is inserted into the wall tamper hole to engage the mechanism.
6. Техникалык шарттар
| Параметр | Деталь |
|---|---|
| Сенсор түрү | Dual rectangular element |
| Камтуу | 88.5° - 11m x 11m (36ft x 36ft); Center beams: 15m (49ft) |
| Үй жаныбарларынын иммунитети | 18 кг (40 фунт) |
| RF жыштыгы | 433 MHz with Magellan only |
| Объектив | 2nd generation Fresnel lens, LODIFF® segments |
| Жөө ылдамдык | 0.2m to 3.5m/s (0.6ft to 11.5ft/s) |
| Батареянын түрү жана иштөө мөөнөтү | 3 x 1.5VDC "AAA" alkaline batteries; 2 years* |
| Учурдагы рейтинг | 31uA standby / 15mA alarm |
| Transmitter диапазону | 35m (115ft) with MG6130 / MG6160; 70m (230ft) with MG5000 / MG5050 / RTX3 |
| Иштөө температурасы. & Нымдуулук | 0°C to 50°C (32°F to 122°F) / 5 to 90% max. |
| Өлчөмдөр & Салмак | 6.5 x 12.5 x 5.2cm (2.5 x 4.9 x 2.0 in) / 105 g (3.7 oz) with batteries |
| RF Иммунитет | EN 50130-4: 10V/m 80MHz to 2.7GHz |
| Шайкештик | Magellan wireless receivers/transceivers (MG6160, MG6130, MG6250, MG5000, MG5050, RTX3) |
| Сертификация | EN 300-200 Certified, EN 50131 Certified (Grade 2 Class II) |
*Battery life expectancy will vary according to the amount of traffic (movement) detected. Higher traffic levels will lower battery life.
Figure 4: PMD2P Technical Specifications Table.
7. Кепилдик жана колдоо
7.1 Кепилдик маалыматы
For detailed warranty information regarding your Paradox PMD2P motion detector, please refer to the warranty card included with your product or visit the official Paradox Security Systems webсайт. Кепилдиктин шарттары жана шарттары аймакка жараша өзгөрүшү мүмкүн.
7.2 Кардарларды колдоо
If you encounter any issues or have questions not covered in this manual, please contact Paradox customer support or visit their official website for further assistance, FAQs, and updated documentation.
Официалдуу Webсайт: www.paradox.com
