Chicco KeyFit 35 Infant Car Seat Instruction Manual

1. Introduction and Overview

Thank you for choosing the Chicco KeyFit 35 Infant Car Seat. This manual provides essential information for the correct installation, operation, and maintenance of your car seat. The KeyFit 35 is designed to safely and comfortably accommodate your baby from 4 to 35 pounds and up to 32 inches tall, offering extended rear-facing use.

It features an Easy-Extend Headrest System, an integrated anti-rebound bar for stability, and intuitive installation features for a secure fit every time. The car seat is compatible with Chicco strollers for convenient travel system use.

2. Коопсуздук маалыматы

WARNING: Always read and follow all instructions and warnings in this manual and your vehicle's owner's manual for proper use and installation. Failure to do so can result in serious injury or death.

• Арткы бети гана: This car seat is designed for rear-facing use only.
• Weight and Height Limits: Use for infants weighing 4-35 pounds and up to 32 inches tall. Discontinue use when your child exceeds these limits.
• Таасирден коргоо: The carrier shell is lined with EPS energy-absorbing foam for enhanced impact protection.
• Анти-ребранда тилкеси: The integrated anti-rebound bar provides increased stability and additional legroom for your growing child.
• Аспап системасы: Always secure your child using the 5-point harness system. Ensure straps are snug and properly positioned.

3. Компоненттер

• Infant Car Seat Carrier
• Stay-in-Car Base
• Removable Infant Head and Body Support
• UPF 50+ Full-Coverage Canopy
• 5 чекиттүү жабдык системасы
• SuperCinch Force-Multiplying LATCH Tightener
• ReclineSure Spring-Loaded Leveling Foot
• RideRight Bubble Level-Indicators
• LockSure Steel-Reinforced Belt System

4. Орнотуу жана орнотуу

The Chicco KeyFit 35 is engineered for easy and secure installation using either the LATCH system or your vehicle's seat belt.

4.1. Base Installation (LATCH System)

1. Place the stay-in-car base on your vehicle's seat in the rear-facing position.
2. Attach the premium LATCH connectors to your vehicle's lower anchors.
3. Use the SuperCinch force-multiplying tightener to achieve a secure fit.
4. Verify the proper recline angle using the ReclineSure spring-loaded leveling foot and RideRight bubble level-indicators. The bubble should be within the green zone.

4.2. Base Installation (Vehicle Belt)

1. Place the stay-in-car base on your vehicle's seat in the rear-facing position.
2. Автоунаанын тизесинен жана ийиндерине кайыш базадагы белгиленген белме жолу аркылуу өткөрүңүз.
3. Engage the LockSure steel-reinforced belt system to secure the belt tightly.
4. Verify the proper recline angle using the ReclineSure spring-loaded leveling foot and RideRight bubble level-indicators.

4.3. Carrier-Only Installation

The KeyFit 35 carrier can also be installed without the base, using the vehicle's seat belt. Refer to the detailed instructions in your full product manual for this method.

4.4. Attaching the Car Seat Carrier to the Base

1. Align the car seat carrier with the installed base.
2. Lower the carrier onto the base until it clicks securely into place.
3. Always check that the carrier is firmly attached to the base by pulling up on the handle.

4.5. Саякат системасынын шайкештиги

The KeyFit 35 Infant Car Seat clicks securely into compatible Chicco strollers, creating a convenient car seat and stroller combo. A one-hand release makes it easy to remove the carrier from the stroller.

5. Иштөө нускамалары

5.1. Балаңызды коргоо

1. Балаңызды унаанын орундугуна отургузуңуз.
2. Fasten the 5-point harness. Ensure the chest clip is at armpit level.
3. Pull the harness tightening strap to ensure a snug fit. You should not be able to pinch any excess webbing at your child's shoulder.

5.2. Adjusting the Headrest and Harness

The Easy-Extend Headrest System adjusts with the no-rethread harness to accommodate your child's growth. Simply squeeze the adjustment lever at the top of the headrest and slide it up or down to the appropriate height.

5.3. Using the Infant Head and Body Support

For newborns weighing 4-11 pounds, use the removable ergonomic head and body support positioner to ensure proper fit and comfort.

5.4. Чатыр менен иштөө

The double-knit, full-coverage canopy offers UPF 50+ sun protection. It can be extended or retracted as needed to shield your child from the sun.

6. Техникалык тейлөө жана тазалоо

The car seat features removable fabrics for easy cleaning. Refer to the care labels on the fabric and the full instruction manual for specific washing instructions.

• Кездемеге кам көрүү: Most fabric components are machine washable on a delicate cycle with mild detergent. Air dry.
• Аспап системасы: Жабуунун боолорун жарнама менен сүртүңүзamp кездеме. Машина менен жуубаңыз же жабдык боолорун сууга салбаңыз, анткени бул аларды алсыратышы мүмкүн.
• Пластик жана металл бөлүктөр: жумшак менен тазалап, damp кездеме жана жумшак самын.

7. Кыйынчылыктарды

If you encounter any issues with your Chicco KeyFit 35 Infant Car Seat, please refer to the following common solutions:

• Бошоң орнотуу: Ensure the LATCH connectors or vehicle belt are tightened fully. Re-check the bubble level-indicators.
• Жөндөө: If the harness is too loose or too tight, adjust the Easy-Extend Headrest System and pull the tightening strap as described in Section 5.2.
• Carrier Not Latching: Ensure no obstructions are preventing the carrier from clicking securely into the base. Re-align and try again.

For further assistance, please contact Chicco customer service.

8. Техникалык шарттар

9. Кепилдик жана колдоо

The Chicco KeyFit 35 Infant Car Seat comes with a 1 жылдык чектелген кепилдик from the manufacturer, Artsana USA, Inc.

For warranty claims, product support, or any questions not covered in this manual, please contact Chicco customer service directly. Contact information can typically be found on the Chicco webсайтында же продуктунун таңгагында.

10. Расмий продукт Video

Watch the official Chicco brand video for an overview of their commitment to baby products.