iBeam Micro камерасынын кара түстөгү бекитилген бурчтуу колдонуучу колдонмосу

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your iBeam Micro Camera Black Fixed Angle (Model TE-MICM). This camera is designed to enhance vehicle safety by providing clear visual assistance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Коопсуздук маалыматы

• Always disconnect the vehicle's battery before beginning any electrical installation.
• Кыска туташуулардын же бузулуулардын алдын алуу үчүн бардык зымдар туура изоляцияланганын жана бекемделгенин текшериңиз.
• Айдоочунун жолуна тоскоол болбоңуз view же орнотуу учурунда унаанын башкаруу элементтерине тоскоолдук кылбаңыз.
• Орнотуу процессинин кандайдыр бир бөлүгүнө ишенбесеңиз, профессионал орнотуучу менен кеңешиңиз.
• This product is intended as an aid and should not replace safe driving practices.

3. Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• iBeam Micro Camera Black Fixed Angle (TE-MICM)
• Mounting Hardware (8MM threaded bolt, nuts, washers)
• Электр зымдары
• Көрсөтмө (бул документ)

Image: The retail packaging for the iBeam Micro Camera, showing the camera and its model number on the box.

4. Продукт бүтүп калдыview

The iBeam Micro Camera (TE-MICM) is a compact, fixed-angle camera designed for various vehicle applications, including backup assistance. It features a durable, water-resistant design and provides a clear image for enhanced visibility.

Сүрөт: жакын план view of the iBeam Micro Camera, highlighting its compact black housing and the camera lens.

Негизги өзгөчөлүктөрү:

• Компакт дизайн: Small footprint for discreet installation.
• Сууга чыдамдуу: IP68 ар кандай аба ырайынын шарттарында ишенимдүү иштөө үчүн бааланган.
• Сүрөт сенсору: 1/4 CMOS image sensor for clear video output.
• Switchable Image: Mirror/Normal image option for versatile mounting (e.g., rear view же алдыңкы view).
• Монтаждоо: Features an 8MM threaded bolt for secure mounting.

5. Орнотуу жана орнотуу

Follow these steps for proper installation of your iBeam Micro Camera:

1. Монтаждоо ордун тандоо: Select a location that provides an unobstructed view and allows for secure mounting. Common locations include above the license plate, on the bumper, or integrated into a vehicle panel. Consider the 18.7mm height of the camera housing for clearance.
2. Монтаждоо бетин даярдоо: If drilling is required, ensure no existing wiring or components will be damaged. Drill a hole appropriate for the 8MM threaded bolt.
3. Камераны орнотуу: Insert the 8MM threaded bolt through the prepared hole and secure the camera using the provided nuts and washers. Ensure the camera is oriented correctly for the desired view.
4. Зымдарды туташтыруу:
   • Connect the camera's power wire (typically red) to a 12V power source that is activated when the camera is needed (e.g., reverse light circuit for a backup camera, or ignition-switched power for a front camera).
   • Connect the camera's ground wire (typically black) to a clean chassis ground point.
   • Connect the video output cable from the camera to the video input of your display monitor or head unit.
5. Сыноо функциясы: Before reassembling vehicle panels, test the camera's operation. Turn on the vehicle and engage the appropriate gear (e.g., reverse) to activate the camera. Verify that the image appears clearly on your display.
6. Коопсуз зымдар: Route all cables safely away from moving parts, heat sources, and sharp edges. Use zip ties or electrical tape to secure wiring.

Image: Illustration showing two common mounting options for the iBeam Micro Camera: a flush mount and a lip mount using the threaded bolt.

6. Иштөө нускамалары

Once installed, the iBeam Micro Camera operates automatically when power is supplied to it and the connected display is active.

• Backup Camera Use: If connected to the reverse light circuit, the camera image will automatically appear on your display when the vehicle is shifted into reverse.
• Front/Side Camera Use: If connected to an ignition-switched power source or a manual switch, the camera can be activated as needed.
• Сүрөттүн багыты: The camera supports switchable mirror/normal image output. Refer to your installer or the camera's wiring diagram for instructions on how to change this setting, typically by cutting a specific wire loop.

7. Техникалык тейлөө

The iBeam Micro Camera is designed for low maintenance. Follow these guidelines to ensure longevity:

• Тазалоо: Мезгил-мезгили менен камеранын линзасын жумшак, гamp кирди, чаңды же сууга тоскоол боло турган тактарды тазалоо үчүн чүпүрөк view. Do not use abrasive cleaners.
• Текшерүү: Regularly check the camera's mounting and wiring connections to ensure they remain secure and free from damage.
• Жогорку басымдагы жуудан алыс болуңуз: While water-resistant, avoid directing high-pressure water sprays directly at the camera lens or housing, as this could potentially compromise the seal.

8. Кыйынчылыктарды

If you experience issues with your iBeam Micro Camera, refer to the following common problems and solutions:

9. Техникалык шарттар

10. Кепилдик жана колдоо

For warranty information and technical support, please contact iBeam customer service or visit the official iBeam webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

Өндүрүүчү: Metra Electronics Corp