1. Киришүү
The Philips EcoFit LED T8 Tube is designed as a quick and easy replacement for traditional fluorescent tubes, offering modern, efficient LED technology. It provides good lighting quality with a natural lighting effect, suitable for general lighting applications, and represents an environmentally friendly lighting solution with a low initial investment.
2. Коопсуздук маалыматы
Please read all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or other injuries.
- Кубатты өчүрүү: Always ensure the power supply is switched off before installing or replacing the LED tube.
- Квалификациялуу электрик: Installation should be performed by a qualified electrician if you are unsure about the wiring.
- Үй ичинде гана колдонуу: Бул продукт, эгерде башкача көрсөтүлбөсө, кургак жерлерде имараттын ичинде колдонуу үчүн иштелип чыккан.
- Туура жабдуу: Ensure the existing fixture is compatible with T8 LED tubes. Some fixtures may require ballast bypass or replacement.
- Этияттык менен мамиле кылуу: LED tubes are fragile. Handle them carefully to avoid breakage.
3. Орнотуу жана орнотуу
Follow these steps for proper installation of your Philips EcoFit LED T8 Tube.
- Кубатты өчүрүү: Locate the circuit breaker controlling the light fixture and switch it to the OFF position. Verify power is off using a voltage сыноочу.
- Remove Old Tube: Carefully twist the existing fluorescent tube 90 degrees and gently pull it out of the fixture.
- Check Ballast Compatibility (if applicable): This LED tube is designed to work with compatible electronic ballasts. If your fixture has an incompatible ballast or is a magnetic ballast, a ballast bypass or replacement may be required. Consult a qualified electrician if unsure.
- Install New LED Tube: Align the pins of the Philips EcoFit LED T8 Tube with the sockets in the fixture. Insert the pins and twist the tube 90 degrees until it locks securely into place.
- Күчтү калыбына келтирүү: Return the circuit breaker to the ON position.
- Сыноо: Turn on the light switch to confirm the LED tube is functioning correctly.
Сүрөт 3.1: Жакын пландан view of the Philips EcoFit LED T8 Tube, showing the pin connectors at the end.
Figure 3.2: The Philips EcoFit LED T8 Tube alongside its retail packaging.
4. Иштөө нускамалары
Operating the Philips EcoFit LED T8 Tube is straightforward once installed.
- Күйгүзүү/өчүрүү: Use the standard wall switch connected to your light fixture to turn the LED tube on or off.
- Заматта толук жарыктык: Unlike traditional fluorescent tubes, LED tubes provide instant full brightness without flickering or warm-up time.
- Энергия үнөмдүүлүгү: This LED tube consumes significantly less energy than equivalent fluorescent tubes, leading to energy savings.
Figure 4.1: The Philips EcoFit LED T8 Tube in an illuminated state, demonstrating its bright, natural light output.
5. Техникалык тейлөө
The Philips EcoFit LED T8 Tube requires minimal maintenance due to its long lifespan and durable design.
- Тазалоо: Ensure the power is off before cleaning. Gently wipe the tube with a soft, dry, or slightly damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Алмаштыруу: The LED tube has a long operational life. Replace it only when it reaches the end of its lifespan or if it becomes damaged.
- Жоюу: Dispose of the LED tube according to local regulations for electronic waste. Unlike fluorescent tubes, LED tubes do not contain mercury.
6. Кыйынчылыктарды
If you encounter issues with your Philips EcoFit LED T8 Tube, try the following troubleshooting steps:
- Tube Not Lighting Up:
- Кубат которгучу ON экенин текшериңиз.
- Автоматтык өчүргүчтүн иштебей калганын текшериңиз.
- Ensure the tube is securely seated in the fixture sockets.
- Confirm the fixture's ballast is compatible or has been bypassed correctly.
- Жылтылдап:
- Flickering can indicate an incompatible or failing ballast. Consider ballast bypass or replacement.
- Ensure stable power supply to the fixture.
- Күңүрт жарык чыгаруу:
- Ensure the tube is clean and free of dust.
- Кубат менен камсыздоону текшериңизtage белгиленген диапазондо.
If problems persist after attempting these steps, contact Philips customer support or a qualified electrician.
7. Техникалык шарттар
Detailed technical specifications for the Philips EcoFit LED T8 Tube.
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель номери | 929001276168 |
| Жарык түрү | LED |
| Ватtage | 16 Ватт |
| Кызытуу эквиваленти Ватtage | 25 Ватт |
| Лампанын формасынын өлчөмү | T8 |
| Лампанын базасы | E26 |
| Ачык түс | Ак |
| Түс температурасы | 6500 Келвин |
| Lumen Output | 1600 Lumens |
| Узундук | 1200 мм |
| Өзгөчө өзгөчөлүк | Энергияны үнөмдүү, узак мөөнөттүү |
| Жеткирүү өлчөмдөрү | 121 x 3 x 3 см; 240 грамм |
| Батареялар талап кылынат | Жок |
Figure 7.1: Visual representation of the Philips LED tube's benefits, including energy savings and technical data.
Figure 7.2: Packaging detail showing product specifications and model number.
8. Кепилдик жана колдоо
For warranty information and customer support, please refer to the official Philips Lighting webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
Кошумча жардам алуу үчүн, баш багыңыз Амазонкадагы Philips Lighting Store.
