Introduction
With the dual monitor stand from DIGITUS® you can conveniently position two monitors of sizes 15" - 32" at your desk. The quick release feature also makes it easier to install the monitors. The VESA mount is simply pushed into the corresponding mount and fixed with a screw. Easily align the monitors according to your needs and can pan, tilt or rotate the monitors themselves, e.g. for portrait monitors. You can also adjust a height adjustment of up to 40 cm. In addition, the cables of the monitors can be neatly laid through the included cable routes. Do something good for yourself and your health by adjusting the monitor optimally to your body and sitting position.
Коопсуздук маалыматы
Сураныч, чогултуу жана колдонуу алдында бардык нускамаларды кунт коюп окуп чыгыңыз. Бул колдонмону келечекте маалымат алуу үчүн сактаңыз.
- Монтаждоодон мурун бардык компоненттер бар экенин жана бузулбаганын текшериңиз. Эгерде кандайдыр бир бөлүктөрү жок же бузулган болсо, колдонбоңуз.
- Do not exceed the maximum weight capacity of 2 x 8 kg (17.6 lbs) per monitor arm.
- Ensure the desk surface is stable and capable of supporting the combined weight of the stand and monitors.
- Always use two people for lifting and positioning heavy monitors to prevent injury.
- Tighten all screws firmly, but do not overtighten to avoid stripping threads.
- Чогултуу учурунда балдарды жана үй жаныбарларын алыс кармаңыз.
Кутуда эмне бар
- Universal dual monitor stand
- Mounting material (screws, washers, tools)
- Орнотуу көрсөтмөлөрү (бул колдонмо)
Сүрөт: бүттүview of the DIGITUS Dual Monitor Stand components, including the base, central pole, monitor arms, and VESA plates.
Орнотуу жана орнотуу
Follow these steps to assemble and install your DIGITUS Dual Monitor Stand.
- Базаны чогултуу: Attach the central pole to the heavy-duty base using the provided screws. Ensure it is securely fastened to provide a stable foundation for your monitors.
- Attach Monitor Arms: Slide the monitor arms onto the central pole. Adjust their height to your desired position and secure them with the locking mechanism.
- Install VESA Plates: Attach the VESA mounting plates to the back of your monitors. The stand supports VESA patterns 75x75mm and 100x100mm. Use the appropriate screws for your monitor.
Сүрөт: Арткы view of two monitors mounted on the stand, illustrating the VESA attachment points and cable routing.
- Мониторлорду орнотуу: Carefully slide the monitors (with VESA plates attached) onto the monitor arms' quick-release slots. Ensure they click into place and are secured with the safety screws.
- Кабелдик башкаруу: Utilize the integrated cable clips or channels along the arms and pole to route your monitor cables neatly. This helps maintain a tidy workspace.
Сүрөт: алдыңкы view of two monitors securely mounted on the DIGITUS stand, demonstrating a clean setup.
Иштөө жана тууралоо
The DIGITUS Dual Monitor Stand offers flexible adjustments for optimal viewсооронуч.
- Бийиктигин тууралоо: Клamp on the central pole to slide the monitor arms up or down. Retighten the clamp firmly once the desired height is achieved.
- Эңкейүүнү тууралоо: Each monitor can be tilted up to 45 degrees (both up and down) to reduce glare and optimize viewing angles. Loosen the tilt knob behind the VESA plate, adjust, and retighten.
- Айланууну жөндөө: The monitor arms can swivel horizontally to position your screens as needed.
- Rotation (Portrait/Landscape): Monitors can be rotated 360 degrees at the VESA plate, allowing for easy switching between landscape and portrait orientations.
- Кабелдик башкаруу: Use the integrated cable clips to route power and video cables along the arms and down the central pole for a clean and organized workspace.
Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө мониторуңуздун узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.
- Тазалоо: Стендди жумшак менен сүртүңүз, гamp кездеме. Финишке зыян келтирүүчү абразивдүү тазалагычтардан же эриткичтерден качыңыз.
- Байланыштарды текшерүү: Мезгил-мезгили менен бардык бурамалар менен байланыштарды текшерип туруңуз, алар бекем жана бекем бойдон калууда. Керек болсо кайра тартыңыз.
- Майлоо: No lubrication is typically required for this type of stand. If any joints become stiff, consult professional advice.
Проблемаларды чечүү
If you encounter issues with your DIGITUS Dual Monitor Stand, refer to the following common problems and solutions.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Туруктуу же туруксуз. | Screws not tightened; uneven desk surface; monitors too heavy. | Ensure all base and arm screws are fully tightened. Place the stand on a flat, stable surface. Verify monitor weight is within limits (max 8 kg per arm). |
| Мониторлор түз эмес. | Uneven VESA plate attachment; arm height not perfectly aligned. | Adjust the height of individual monitor arms slightly. Ensure VESA plates are mounted straight on the monitors. |
| Difficulty tilting monitors. | Tilt knob too tight or too loose. | Loosen the tilt knob slightly to adjust, then retighten to secure the desired angle. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Digitus |
| Модель номери | DA-90401 |
| Сериялар | DA-90401 |
| Элемент Салмагы | 8.6 фунт |
| Продукциянын өлчөмдөрү (LxWxH) | 15 x 32.01 x 6.69 дюйм |
| Монтаж түрү | Столдун үстү |
| Кыймыл түрү | Tilt, Swivel, Rotate |
| Maximum Compatible Monitor Size | 32 дюйм |
| Minimum Compatible Monitor Size | 15 - 32 дюйм |
| Максималдуу кыйшаюу бурч | 45 градус |
| Материал | Эритме болот |
| VESA шайкештиги | 75 х 75 мм, 100 х 100 мм |
| Максималдуу жүктөө сыйымдуулугу | 2 x 8 kg (17.6 lbs) |
Кепилдик жана колдоо
This product comes with a 1-year EU spare part availability duration, indicating support for replacement parts within this period.
For further assistance, technical support, or warranty claims, please contact DIGITUS customer service through their official website or the retailer where the product was purchased. Please have your model number (DA-90401) and purchase information ready.
Көбүрөөк маалымат алуу үчүн төмөнкүгө кириңиз: www.digitus.info
