Landa насос майы SAE 10W-40 үчүн колдонмо

1. Киришүү

This manual provides essential information for the proper use, storage, and handling of Landa Premium Pump Oil SAE 10W-40. Adhering to these guidelines will ensure optimal performance and longevity of your high-pressure pump systems.

2. Продукт бүтүп калдыview

Landa Premium Pump Oil SAE 10W-40 is a high-quality mineral base lubricating oil specifically formulated for use in high-pressure piston precision pumps. It is designed to provide superior protection and performance in demanding environments.

Figure 1: Landa Premium Pump Oil SAE 10W-40, 32 oz. bottle. The label clearly indicates "Landa Premium Pump Oil SAE 10W-40 Multi-Grade" and highlights its benefits: "Reduces wear, Inhibits corrosion, Prevents foaming, Blocks moisture."

Негизги өзгөчөлүктөрү:

• Көлөмү: 32 fluid ounces (0.946 liters).
• Илешкектүүлүгү: Premium 10W-40 multi-grade oil.
• Формуласы: Blended with wear, rust, and foam inhibitors.
• Шайкештик: Formulated to exceed factory specifications for Landa high-pressure pumps.
• Аткаруу: Offers a wide load and temperature range, resistant to changes for increased reliability.
• Стандарттар: Meets or exceeds API Service CB, CC/SB, SC, SD, SE.

3. Intended Use and Application

This pump oil is specifically designed for lubricating high-pressure piston precision pumps. It is crucial to use the correct type and grade of oil to ensure the efficient and safe operation of your pump.

Колдонмо көрсөтмөлөрү:

1. Check Pump Manual: Always refer to your specific pump's instruction manual for recommended oil type, viscosity, and change intervals.
2. Мунай деңгээли: Ensure the pump oil level is maintained within the manufacturer's specified range.
3. Май алмаштыруу: Replace pump oil according to the pump manufacturer's schedule or more frequently under heavy use conditions.
4. Шайкештик: This oil is suitable for Landa high-pressure pumps and other pumps requiring SAE 10W-40 multi-grade oil meeting API Service CB, CC/SB, SC, SD, SE standards.

4. Коопсуздук маалыматы

Always handle lubricating oils with care. Observe the following safety precautions:

• Тери менен байланыш: Avoid prolonged or repeated skin contact with used oil. Wash thoroughly with soap and water after handling.
• Көз менен байланыш: In case of contact with eyes, flush immediately with large amounts of water and seek medical attention if irritation persists.
• Жутуу: Do not ingest. If swallowed, do not induce vomiting. Call a poison control center or doctor immediately.
• Ингаляция: Use in a well-ventilated area. Avoid breathing oil mists or vapors.
• Тутануучулук: Keep away from open flames, sparks, and hot surfaces. Do not smoke when handling oil.
• Балдар жана үй жаныбарлары: Балдар жана үй жаныбарлары жетпеген жерде сактаңыз.

5. Сактоо жана иштетүү

Proper storage and handling are essential to maintain the quality of the pump oil.

• Сактоо температурасы: Салкын, кургак жерде, түз күндүн нурунан жана экстремалдык температурадан алыс сактаңыз.
• Container Integrity: Keep the container tightly sealed to prevent contamination and moisture ingress.
• Вентиляция: Жакшы желдетилген жерде сактаңыз.
• Төгүлүүлөр: In case of spills, contain the liquid and absorb with inert material (e.g., sand, sawdust). Dispose of contaminated material properly.

6. Жок кылуу маалыматы

Used oil and empty containers must be disposed of responsibly and in accordance with local, state, and federal regulations.

• Кайра иштетүү: Recycle used oil at authorized collection points. Do not pour used oil down drains or onto the ground.
• Container Disposal: Empty containers may contain residual oil. Dispose of them according to local regulations for hazardous waste or recycling.

7. Техникалык шарттар

8. Troubleshooting (Oil Related)

While this product is a consumable, issues can arise from improper oil use or selection. Refer to your pump's manual for specific troubleshooting steps related to lubrication.

• Насостун ысып кетиши: Ensure correct oil level and type. Old or incorrect oil can lead to increased friction and heat.
• Адаттан тыш насостун үнү: Low oil levels or contaminated oil can cause abnormal noises. Check and replace oil as needed.
• Мунай агып кетиши: While not directly related to the oil itself, ensure pump seals and gaskets are in good condition. Using the correct oil viscosity can help prevent leaks if seals are worn.
• Oil Discoloration/Cloudiness: Indicates contamination (e.g., water, debris) or degradation. Replace oil immediately.

9. Кепилдик жана колдоо

For specific warranty information regarding Landa products, please refer to the documentation provided with your Landa high-pressure pump or contact Landa customer support directly. This pump oil is a consumable item; its warranty typically covers manufacturing defects prior to use.

For further assistance or inquiries about Landa products, please visit the official Landa website or contact their authorized distributors. For general product information or purchasing, you may refer to the product page on Amazon.com.