1. Киришүү
This manual provides essential information for the proper setup, operation, and maintenance of your Bingfu Handheld Marine VHF Radio Antenna. Please read these instructions carefully before use to ensure optimal performance and longevity of your product. This antenna is designed for use with handheld marine VHF two-way radios operating within the 136-174MHz frequency range.
2. Продукт бүтүп калдыview
The Bingfu Handheld Marine VHF Radio Antenna is a durable and flexible "rubber duck" style antenna featuring an SMA Male connector. It is designed for omni-directional signal reception and transmission, enhancing the communication capabilities of compatible marine VHF radios.

2.1-сүрөт: The antenna's flexible design allows for durability and resistance to bending.
Видео 2.1: Demonstration of the antenna's flexibility and SMA Male connector type.
3. Техникалык шарттар
| Жыштык диапазону | VHF 136-174 МГц |
| VSWR | < 2.0 |
| Импеданс | 50 Ом |
| Багыт | Omni-багыттуу |
| Антенна туташтыргычы | SMA Эркек |
| Антенна бийиктиги | 15 см (6 дюйм) |
| Таза Салмак | 60g (per antenna) |
| Иштөө температурасы | -20°C ~ +80°C |
| Сактоо температурасы | -30°C ~ +85°C |
| Туура келген радиолор | Standard Horizon HX210, HX870, HX890, HX300, HX380, HX40, HX280, HX290, HX370; Uniden MHS75 Handheld Floating VHF Radio |

3.1-сүрөт: The antenna measures approximately 15 cm (6 inches) in length.
4. Орнотуу нускамалары
Follow these steps to properly attach the antenna to your compatible handheld marine VHF radio:
- Туташтыргычтардын түрлөрүн аныктаңыз: Ensure your radio has an SMA Female connector and the antenna has an SMA Male connector.
- Туташтыргычтарды тегиздөө: Carefully align the SMA Male connector of the antenna with the SMA Female connector on your radio.
- Screw On Antenna: Gently screw the antenna onto the radio's connector in a clockwise direction. Do not overtighten, as this can damage both the antenna and the radio's connector. Tighten until snug.
- Коопсуз шайкештигин текшериңиз: Verify that the antenna is securely attached and there is no wobble.
- Optional Gasket: If provided, ensure any rubber gasket or O-ring is properly seated to maintain water resistance, especially for marine radios.

4.1-сүрөт: Proper connection of the SMA Male antenna to an SMA Female radio port.
Видео 4.1: Visual guide on how to connect an SMA Male antenna to a radio with an SMA Female connector.
5. Иштөө нускамалары
Once the antenna is securely attached, your radio is ready for operation. The antenna is omni-directional, meaning it receives and transmits signals from all directions. For optimal performance, ensure the antenna is positioned vertically and unobstructed.
- Радио күчү: Turn on your handheld marine VHF radio.
- Канал тандоо: Select the desired VHF channel according to marine communication regulations.
- Жугуу: When transmitting, hold the radio with the antenna as vertical as possible. Avoid touching the antenna during transmission to prevent signal degradation.
- Кабыл алуу: The antenna will receive signals from all directions. For best reception, maintain a clear line of sight if possible.
6. Техникалык тейлөө
Proper maintenance ensures the longevity and performance of your antenna:
- Тазалоо: Clean the antenna periodically with a soft, damp кездеме. Катуу химиялык заттардан же абразивдүү материалдардан алыс болуңуз.
- Текшерүү: Regularly inspect the antenna for any signs of damage, such as cracks in the rubber or corrosion on the connector.
- Туташтыргычка кам көрүү: Keep the SMA Male connector clean and dry. If used in marine environments, consider applying a small amount of dielectric grease to the threads to prevent corrosion.
- Сактагыч: When not in use for extended periods, store the antenna in a cool, dry place away from direct sunlight and extreme temperatures.
7. Кыйынчылыктарды
If you experience issues with your antenna, consider the following common solutions:
- Сигналдын кабыл алынышы/өткөрүлүшү начар:
- Ensure the antenna is securely attached to the radio.
- Verify the antenna is compatible with your radio's frequency band (VHF 136-174MHz).
- Check for any physical damage to the antenna or its connector.
- Ensure there are no obstructions blocking the antenna's signal path.
- Test the radio with a known working antenna to isolate the issue.
- Antenna Not Fitting Securely:
- Confirm that your radio has an SMA Female connector. This antenna is SMA Male.
- Inspect the threads on both the antenna and the radio for damage or debris.
8. Кепилдик жана колдоо
Кепилдик маалыматы же техникалык колдоо үчүн өндүрүүчүнүн расмий өкүлүнө кайрылыңыз webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
Manufacturer: BINGFU
Модель: BFN00506


