1. Киришүү
This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the RS PRO RSDS 1052 DL+ Digital Storage Oscilloscope. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage or injury.
The RS PRO RSDS 1052 DL+ is a versatile 2-channel digital storage oscilloscope with a 50 MHz bandwidth, designed for precise signal analysis. It features a 7-inch TFT LCD display for clear waveform visualization and supports various measurement parameters and mathematical operations.
2. Коопсуздук маалыматы
Always adhere to the following safety precautions to prevent electric shock, fire, or damage to the instrument.
- Кубат булагы: Ensure the oscilloscope is connected to a power source within the specified voltage range (100-240V AC, 50/60Hz).
- Негиздөө: The instrument must be properly grounded to prevent electric shock. Do not defeat the grounding plug.
- Курчап турган чөйрө: Operate the oscilloscope in a dry, well-ventilated area, away from direct sunlight, high temperatures, and excessive dust.
- Зонддор: Use only probes supplied or recommended by RS PRO. Ensure probes are correctly rated for the voltagд өлчөнөт.
- Тейлөө: Refer all servicing to qualified service personnel. Do not attempt to open the instrument casing unless explicitly instructed.
- Коопсуздук категориясы: This device is rated CAT I, CAT II. Observe all safety warnings on the device and in this manual.
3. Продукт бүтүп калдыview жана компоненттер
Бул бөлүм ашыкча камсыз кылатview of the RS PRO RSDS 1052 DL+ oscilloscope and its main components.
Сүрөт 3.1: Алдыңкы View of the Oscilloscope. This image shows the front panel of the RS PRO RSDS 1052 DL+ oscilloscope, highlighting the 7-inch TFT LCD display, control knobs, function buttons, and input connectors for channels 1 and 2. The screen displays a typical waveform and FFT analysis.
3.2-сүрөт: Бурчтуу View of the Oscilloscope. This image provides an angled perspective of the RS PRO RSDS 1052 DL+ oscilloscope, showcasing its compact design and integrated handle for portability. The side ventilation grilles are also visible.
3.3-сүрөт: Арткы View of the Oscilloscope. This image displays the rear panel of the RS PRO RSDS 1052 DL+ oscilloscope, featuring the power input, USB device port, USB host port, LAN port, and Pass/Fail output. Safety warnings and product labels are also visible.
Figure 3.4: Oscilloscope Probe and Accessories. This image shows a passive oscilloscope probe (1:1/10:1) along with various accessories, including colored rings for channel identification and probe tip covers. These are essential for connecting signals to the oscilloscope.
Figure 3.5: Power Plugs and Probe Tip. This image displays an assortment of power plugs (EU, UK, US types) that may be included with the oscilloscope, along with a specialized probe tip. These ensure compatibility with various power outlets and provide versatility for measurements.
3.1 Кошумча жабдуулар
The RS PRO RSDS 1052 DL+ typically includes the following accessories:
- Passive Probe 1:1/10:1 (x2)
- USB кабели
- Quick Start Guide
- Сапат сертификаты
- Power Cord (region-specific)
- CD (including User Manual and EasyScopeX software)
4. Орнотуу
4.1 Таңгактан чыгаруу жана текшерүү
- Carefully remove the oscilloscope and all accessories from the packaging.
- Inspect the instrument for any signs of physical damage during transit. If damage is found, contact your supplier immediately.
- Verify that all included accessories listed in Section 3.1 are present.
4.2 Кубат туташтыруу
- Арткы панелдеги кубат которгучу ӨЧҮРҮҮ абалында экенин текшериңиз.
- Connect the provided power cord to the AC input on the rear panel of the oscilloscope.
- Plug the other end of the power cord into a grounded AC power outlet. The oscilloscope supports 100-240V AC, 50/60Hz.
4.3 Зондду туташтыруу жана компенсациялоо
- Connect the BNC connector of the passive probe to one of the input channels (CH1 or CH2) on the front panel.
- Attach the probe tip to the probe compensation output (usually a square wave test signal) on the front panel.
- Adjust the compensation trimmer on the probe until the displayed square wave is flat-topped, without overshoot or undershoot. This ensures accurate measurements.
5. Иштөө нускамалары
5.1 Негизги операция
- Күйгүзүү/өчүрүү: Press the power button on the front panel to turn the oscilloscope on or off.
- Автоматтык орнотуу: басыңыз Авто button to automatically adjust vertical, horizontal, and trigger settings for a stable waveform display.
- Вертикалдык башкаруу элементтери: колдонуу VOLTS/DIV knob to adjust the vertical scale (voltage per division) and the POSITION knob to move the waveform vertically.
- Горизонталдык башкаруу элементтери: колдонуу SEC/DIV knob to adjust the horizontal scale (time per division) and the POSITION knob to move the waveform horizontally.
- Триггерди башкаруу элементтери: тууралаңыз LEVEL knob to set the trigger threshold. The trigger ensures a stable display of repetitive waveforms.
5.2 Өркүндөтүлгөн функциялар
- Өлчөө функциялары: басыңыз өлчөө button to access automatic measurement parameters such as Vpp, Vmax, Vmin, Freq, Period, etc.
- Математикалык функциялар: басыңыз Математика button to perform mathematical operations on waveforms (e.g., Add, Subtract, Multiply, Divide, FFT).
- Сактоо жана кайра чакыртып алуу: колдонуу Сактоо/чакыруу buttons to save waveform data, setups, or screenshots to internal memory or a USB drive.
- USB туташуу: Connect a USB drive to the front panel USB host port for data storage. Use the rear USB device port to connect the oscilloscope to a PC for data transfer and control via EasyScopeX software.
6. Техникалык тейлөө
6.1 Тазалоо
- Тазалоодон мурун электр шнурын ажыратыңыз.
- жумшак колдонуу, damp cloth with mild detergent to clean the exterior of the instrument.
- Do not use abrasive cleaners or solvents that may damage the plastic parts.
- Ensure no liquid enters the instrument.
6.2 Калибрлөө
The oscilloscope is factory calibrated. For optimal performance, periodic calibration by qualified personnel is recommended, typically every 12-24 months, depending on usage and environmental conditions.
6.3 Сактоо
When not in use for extended periods, store the oscilloscope in a dry, dust-free environment, away from extreme temperatures and humidity.
7. Кыйынчылыктарды
Бул бөлүмдө сиз кабылышы мүмкүн болгон жалпы маселелерди чечүү жолдору каралган.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Күч жок | Power cord disconnected; Power switch off; Blown fuse | Check power cord connection; Turn power switch on; Contact service for fuse replacement. |
| Толкун формасы көрсөтүлгөн жок | Input signal too small/large; Incorrect vertical/horizontal settings; Trigger not set correctly; Probe not connected | Adjust VOLTS/DIV and SEC/DIV; Use Auto Setup; Adjust trigger level; Ensure probe is connected and compensated. |
| Туруксуз толкун формасы | Incorrect trigger settings; No trigger source selected | Adjust trigger level and mode; Select appropriate trigger source (e.g., CH1, CH2, Ext). |
| Бурмаланган толкун формасы | Probe compensation incorrect; Probe damaged; Input overloaded | Perform probe compensation; Try a different probe; Check input signal ampжарыктык. |
If the problem persists after attempting these solutions, please contact RS PRO customer support.
8. Техникалык шарттар
Key technical specifications for the RS PRO RSDS 1052 DL+ Digital Storage Oscilloscope:
- Аналогдук каналдар: 2
- Oscilloscope Type: Санариптик сактагыч
- өткөрүү жөндөмдүүлүгү: 50 МГц
- Реалдуу убакытта С.ample Rate: 500 МСа/с чейин
- Эстутум тереңдиги: 32 Kpt
- Дисплей түрү: TFT LCD
- Дисплей өлчөмү: 7 дюйм (800 x 480 пиксел)
- Vertical Sensitivity: 2mV/div to 10V/div
- Time Base Range: 10ns/div - 50s/div
- Электр камсыздоо: Mains operated (100-240V AC, 50/60Hz)
- Салмагы: 2.5 кг
- Коопсуздук категориясы: CAT I, CAT II
- Интерфейстер: RS232, USB Host, USB Device, LAN
9. Кепилдик жана колдоо
RS PRO products are manufactured to high standards and are typically covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official RS PRO webдеталдуу кепилдик шарттары жана шарттары үчүн сайт.
For technical support, service, or inquiries regarding your RS PRO RSDS 1052 DL+ oscilloscope, please contact RS PRO customer service through their official channels. Contact information can usually be found on the RS PRO website or in the documentation provided with the product.
RS PRO Official Webсайт: https://uk.rs-online.com/web/
