Продукт бүттүview
The ECHO CS-3510 is a commercial-grade gas-powered rear handle chain saw designed for various cutting tasks. Its 34.4cc engine provides substantial power, making it suitable for storm clean-up, light firewood cutting, limb trimming, and felling trees up to 28 inches in diameter. The design prioritizes user comfort and productivity with its lighter weight and efficient power delivery.
Image: The ECHO CS-3510 Chain Saw, showcasing its orange and black design with a 16-inch bar.
Негизги өзгөчөлүктөрү:
- 34.4cc commercial grade gas engine for reliable power.
- Optimized weight for reduced operator fatigue and increased productivity.
- i-30 starter system designed to reduce starting effort by 30%.
- 3-point spring vibration reduction system for enhanced operator comfort during extended use.
- Air injection air cleaner system for improved air filtration and reduced maintenance requirements.
Орнотуу колдонмосу
1. Таңгактан чыгаруу жана алгачкы текшерүү
Carefully remove all components from the packaging. Inspect the chain saw for any signs of damage that may have occurred during shipping. Ensure all parts listed in the packing list are present.
2. Fuel and Oil Mixture Preparation
The ECHO CS-3510 requires a specific fuel mixture. Use fresh, unleaded gasoline with an octane rating of 89 or higher, mixed with a high-quality 2-stroke engine oil at a ratio specified in the separate engine manual (typically 50:1). Always mix fuel in a clean, approved fuel container.
3. Штанга жана чынжырды орнотуу
- Place the chain saw on a flat, stable surface.
- Remove the chain cover by loosening the two nuts.
- Carefully position the chain around the clutch drum and guide bar, ensuring the cutting edges of the chain are facing the correct direction (refer to directional arrows on the chain).
- Slide the guide bar onto the studs, aligning the chain with the groove in the bar.
- Чынжырдын капкагын кайра ордуна коюп, гайкаларды кол менен бекемдеңиз.
- Adjust chain tension using the tensioning screw. The chain should be snug against the bar but still able to be pulled freely by hand.
- Fully tighten the chain cover nuts.
Сүрөт: бир тарап view of the ECHO CS-3510 Chain Saw, illustrating the guide bar and chain assembly.
4. Filling Fuel and Chain Oil Tanks
Fill the fuel tank with the prepared fuel mixture. Fill the chain oil tank with high-quality bar and chain lubricant. Do not overfill. Ensure caps are securely tightened.
Иштөө нускамалары
1. Операцияга чейинки текшерүүлөр
- Чынжырдын тартылуусунун туура экенин текшериңиз.
- Күйүүчү майдын жана чынжыр майынын деңгээлин текшериңиз.
- Чынжырдын курчтугун жана бузулгандыгын текшериңиз.
- Бардык гайкалар жана болттор бекем болушун текшериңиз.
- Баштоодон мурун, чынжыр тормозунун ажыратылганын текшериңиз.
2. Кыймылдаткычты ишке киргизүү (Муздак от алдыруу)
- Чынжырлуу арааны катуу, тегиз жерге коюңуз.
- Чынжыр тормозун иштетиңиз.
- Муунткучтун рычагын FULL CHOKE абалына жылдырыңыз.
- Press the primer bulb 5-7 times until fuel is visible.
- Pull the starter handle firmly and smoothly until the engine "pops" or attempts to start.
- Move the choke lever to the HALF CHOKE or RUN position.
- Кыймылдаткыч күйгөнгө чейин стартер туткасын кайра тартыңыз.
- Allow the engine to warm up for a few moments before disengaging the chain brake and beginning operation.
3. Кыймылдаткычты от алдыруу (Жылуу от алдыруу)
For a warm engine, move the choke lever directly to the RUN position and pull the starter handle until the engine starts.
4. Basic Cutting Techniques
- Always maintain a firm grip with both hands on the handles.
- Stand with your feet shoulder-width apart for stability.
- Артка соккуну болтурбоо үчүн багыттоочу тилкенин учу менен кесүүдөн качыңыз.
- Plan your cuts to ensure the wood falls safely and away from you.
- Be aware of pinching hazards when cutting through logs under tension.
5. Моторду токтотуу
To stop the engine, move the ignition switch to the "OFF" position. Engage the chain brake for safety when not actively cutting.
Тейлөө графиги
Regular maintenance is crucial for the longevity and safe operation of your ECHO CS-3510 chain saw.
Daily Maintenance (Before Each Use):
- Check chain sharpness and tension.
- Inspect guide bar for wear and burrs.
- Verify chain oiler is functioning.
- Clean debris from air filter and cooling fins.
- Бардык бекиткичтердин бекемдигин текшериңиз.
Weekly Maintenance (or Every 10 Operating Hours):
- Аба чыпкасын тазалаңыз же алмаштырыңыз.
- Clean spark plug and check gap. Replace if necessary.
- Clean clutch area and chain brake mechanism.
- Inspect fuel filter.
- Rotate guide bar to ensure even wear.
чынжыр курчутуу:
A sharp chain is essential for safe and efficient cutting. Sharpen the chain regularly using a round file of the correct diameter (refer to your chain's specifications) and a flat file for depth gauges. Alternatively, have the chain professionally sharpened.
Аба чыпкасын тазалоо:
Remove the air filter cover and carefully remove the air filter. Clean it with warm, soapy water, rinse thoroughly, and allow it to air dry completely before reinstallation. For heavily soiled filters, replacement may be necessary.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Мотор иштебейт | No fuel, incorrect choke position, fouled spark plug, clogged fuel filter. | Add fresh fuel, adjust choke, clean/replace spark plug, replace fuel filter. |
| Engine starts but stalls | Incorrect fuel mixture, dirty air filter, carburetor issues. | Use correct fuel mixture, clean air filter, consult service center for carburetor. |
| Chain does not cut efficiently | Чынжырдын өңү өчкөн, чынжырдын туура эмес тартылышы, жол көрсөткүч тилкесинин эскиргендиги. | Sharpen chain, adjust tension, replace guide bar. |
| Ашыкча термелүү | Loose components, damaged chain/bar, engine imbalance. | Check all fasteners, inspect chain/bar for damage, seek professional service. |
Техникалык мүнөздөмөлөр
| Спецификация | Деталь |
|---|---|
| Бренд | ECHO |
| Модель номери | CS-3510-16 |
| Power Source | Бензин менен иштейт |
| Мотордун жылышы | 34.4cc |
| Ат күчү | 2.7 киловатт |
| Chain Length | 16 дюйм |
| Элемент Салмагы | 8.16 фунт (130.51 унция) |
| Продукциянын өлчөмдөрү (L x W x Y) | 20"L x 12"W x 12"H |
| UPC | 743184021644 |
| Өндүрүүчү | Эхо |
| Биринчи жеткиликтүү | 15-июль, 2020-жыл |
Кепилдик жана колдоо
ECHO products are manufactured to high standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ECHO webсайт.
For technical assistance, parts, or service, please contact an authorized ECHO service dealer. You can find a dealer near you by visiting the ECHO webсайтына кириңиз же алардын кардарларды колдоо линиясына кайрылыңыз.
Маанилүү: Always provide your product model number (CS-3510-16) and serial number when seeking support.
