myGEKOgear GO1228G

myGEKOgear Orbit 122 унаа камерасынын колдонуучу колдонмосу

Model: GO1228G

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your myGEKOgear Orbit 122 Vehicle Camera. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

myGEKOgear Orbit 122 Dash Cam and two blind spot mirrors

Image: The myGEKOgear Orbit 122 Dash Cam shown alongside two circular blind spot mirrors, representing the package contents.

Продукт бүттүview

Familiarize yourself with the components of your Orbit 122 Vehicle Camera.

Фронт View

Фронт view of myGEKOgear Orbit 122 Dash Cam

Image: The front of the myGEKOgear Orbit 122 Dash Cam, featuring the main camera lens with "FULL HD F=2.0/f=3.2mm DIGITAL CAMCORDER" text around it.

Side View (Баскычтар)

Side view of myGEKOgear Orbit 122 Dash Cam showing control buttons

Сүрөт: каптал view of the dash cam, displaying three control buttons: an up arrow (likely for navigation/Wi-Fi), an 'OK' button, and a down arrow (likely for navigation).

Side View (Порттор)

Side view of myGEKOgear Orbit 122 Dash Cam showing USB port and power button

Image: The opposite side view of the dash cam, showing a USB port, a power button, and another button (possibly for mode or menu).

Жогорку/Төмөнкү View (Порттор)

Жогорку view of myGEKOgear Orbit 122 Dash Cam showing TF card slot and microphone

Сүрөт: Жогорку view of the dash cam, showing a "TF" card slot for the microSD card and a "MIC" label for the microphone.

Жайгашуу

Follow these steps to install and power your dash cam:

  1. Монтаждоо: Attach the windshield suction mount to a clean, dry area on your vehicle's windshield, ensuring it does not obstruct your view. Secure the dash cam to the mount.
  2. MicroSD картасын салыңыз: Insert the provided 8GB microSD card into the TF card slot on the dash cam. Ensure it is inserted correctly until it clicks into place.
  3. Кубат туташуу: Connect the 12-24V car charger to the USB port on the dash cam. Route the cable neatly along the windshield and dashboard to your vehicle's cigarette lighter socket or auxiliary power outlet.
  4. Күйгүзүү: Start your vehicle. The dash cam will automatically power on and begin recording. If it does not power on automatically, press the power button.

Video: This video demonstrates the installation process for a myGEKOgear dash cam (Orbit 110 model, similar to Orbit 122). It shows how to mount the camera, connect the power cable, and route it for a tidy setup. The dash cam powers on automatically when the car starts.

Иштөө нускамалары

The Orbit 122 is designed for straightforward operation.

Техникалык тейлөө

To ensure optimal performance and longevity of your dash cam:

Проблемаларды чечүү

If you encounter issues with your Orbit 122, refer to the following common solutions:

КөйгөйЧечим
Dash камерасы күйбөйт.Ensure the car charger is securely connected to both the dash cam and the vehicle's power outlet. Verify the vehicle's power outlet is functioning. Try manually pressing the power button.
"Memory Full" error or not recording.Format the microSD card through the dash cam's menu. Ensure loop recording is enabled. Replace the microSD card if the issue persists, as it may be faulty.
Видеонун сапаты начар.Clean the camera lens. Ensure the protective film has been removed from the lens. Check video resolution settings in the menu to confirm it's set to 1080P.
G-sensor not triggering or too sensitive.Adjust the G-sensor sensitivity setting in the dash cam's menu. Lower sensitivity for fewer false triggers, higher for more detection.

Техникалык шарттар

ӨзгөчөлүкДеталь
БрендmyGEKOgear
Модель атыGO1228G
Видео тартуунун резолюциясы1080p толук HD
Field Of View120 градус
Өзгөчө өзгөчөлүкAuto Incident Recording (G-Sensor)
Байланыш технологиясыUSB
Монтаж түрүСоруу Тоосу
Элемент Салмагы4 унция
Продукциянын өлчөмдөрү2 x 2 x 1 дюйм
ТүсКара
Батареялар1 литий-иондук батарейка талап кылынат (кошулган)
ӨндүрүүчүPAPAGO Inc

Кепилдик жана колдоо

For warranty information or technical support, please refer to the official myGEKOgear webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.