Hanwha Techwin HCP-6320HA Full-HD 2MP Аналогдук HD PTZ Dome камерасы колдонуучунун колдонмосу

Introduction

This manual provides essential instructions for the installation, operation, and maintenance of your Hanwha Techwin HCP-6320HA Full-HD 2MP Analog HD PTZ Dome Camera. Please read this manual thoroughly before using the product to ensure proper and safe operation.

Коопсуздук маалыматы

• Орнотуу бардык жергиликтүү кодекстерге жана эрежелерге ылайык квалификациялуу адистер тарабынан аткарылышы керек.
• Ensure the power supply (24V AC) matches the camera's requirements. Disconnect power before any installation or maintenance procedures.
• Do not expose the camera to extreme temperatures, humidity, or corrosive environments beyond its specified operating conditions.
• Avoid direct exposure of the lens to strong light sources, as this may damage the image sensor.
• This product is designed for outdoor use with IP66 weather protection and IK10 vandal resistance.

Пакеттин мазмуну

Сиздин пакетте бардык компоненттер бар экенин текшериңиз:

• HCP-6320HA PTZ Dome Camera
• Колдонуучунун колдонмосу (бул документ)
• Mounting hardware (if included in standard package)

Продукт бүттүview

The Hanwha Techwin HCP-6320HA is a high-performance Full-HD 2MP Analog HD PTZ (Pan-Tilt-Zoom) dome camera designed for outdoor surveillance. It features a powerful 32x optical zoom lens (4.44-142.6mm), Day & Night functionality with an IR Cut Filter (ICR), Wide Dynamic Range (WDR 120dB), and advanced noise reduction (SSNRIII).

1-сүрөт: Фронт view of the Hanwha Techwin HCP-6320HA PTZ Dome Camera. The camera features a white dome housing with a clear protective bubble covering the lens assembly. The "Wisenet" logo is visible on the upper part of the dome.

Негизги өзгөчөлүктөрү

• 2 Megapixel (1920 x 1080) Full HD Resolution
• 1/2.8" CMOS сенсору
• 32x Optical Zoom (4.44 ~ 142.6mm)
• Day & Night (ICR) and Defog functions
• WDR (120dB) and SSNRIII (Digital Noise Reduction)
• High-speed Pan/Tilt: 700°/sec preset speed
• IP66 Weatherproof and IK10 Vandal-Proof ratings
• Analog HD (AHD/TVI/CVI/CVBS selectable) video output
• RS-485 and Coaxitron (Up the Coax) control

Орнотуу жана орнотуу

Камераны орнотуу

The HCP-6320HA is designed for wall mounting. Ensure the mounting surface is strong enough to support the camera's weight (approximately 7 lbs) and any associated cabling.

1. Каалаган талааны камсыз кылган ылайыктуу монтаждоо жерин тандаңыз view and is within reach of power and video cables.
2. Use the provided mounting template (if applicable) to mark drilling points for the mounting bracket.
3. Тешиктерди бургулап, бекитүүчү кронштейнди тиешелүү бурамалар жана анкерлер менен бетке бекитиңиз.
4. Attach the camera to the mounting bracket, ensuring it is firmly secured.

Зымдарды туташтыруу

The camera requires a 24V AC power supply and uses wired connectivity for video and control.

1. Кубат туташуу: Connect the 24V AC power supply to the camera's power input. Ensure correct polarity.
2. Видео чыгаруу: Connect the analog HD video output (BNC connector) to your DVR or video monitoring system. The camera supports various analog HD formats (AHD, TVI, CVI) and CVBS, which can typically be selected via the OSD menu or DIP switches.
3. Башкаруу (милдеттүү эмес): For PTZ control, connect the RS-485 communication lines (Tx+/Tx-) to your DVR or PTZ controller. Alternatively, Coaxitron (Up the Coax) control can be used if supported by your DVR, eliminating the need for separate RS-485 wiring.

Баштапкы конфигурация

After physical installation and wiring, power on the camera. Access the camera's On-Screen Display (OSD) menu via your DVR or controller to configure settings such as video format, PTZ protocols, and image adjustments.

Камераны иштетүү

Pan, Tilt, and Zoom (PTZ) Control

The HCP-6320HA offers precise PTZ control, allowing you to remotely adjust the camera's viewing angle and zoom level.

• Пан: Rotate the camera horizontally (360° continuous).
• Россия: Adjust the camera vertically.
• Чоңойтуу: Use the 32x optical zoom to magnify distant objects.
• Фокус: The camera typically features auto-focus, but manual focus may be available via the OSD menu.

Preset and Tour Functions

Configure specific camera positions (presets) and sequences of presets (tours) for automated surveillance.

• Алдын ала орнотууларды орнотуу: Move the camera to the desired position, zoom, and focus, then save it as a preset through your DVR or controller interface. The camera supports high-speed preset recall.
• Running Tours: Create a tour by linking multiple presets in a specific order and duration.

Сүрөт орнотуулары

Adjust various image parameters through the OSD menu to optimize video quality for different lighting conditions.

• WDR (Кең динамикалык диапазон): Improves visibility in scenes with both very bright and very dark areas.
• Күн түн: Automatically switches between color (day) and black & white (night) modes, utilizing the IR Cut Filter (ICR).
• SSNRIII: Reduces digital noise in low-light conditions.
• Катуу: Enhances image clarity in foggy or hazy environments.

Техникалык тейлөө

Тазалоо

• Regularly clean the camera's dome cover with a soft, damp чаңды жана кирди кетирүү үчүн кездеме колдонуңуз. Абразивдүү тазалоочу каражаттардан алыс болуңуз.
• Ensure the lens is free from smudges or obstructions for clear image quality.

Орнотулган программаны жаңыртуу

Hanwha Techwinди мезгил-мезгили менен текшерип туруңуз website for firmware updates. Firmware updates can improve performance, add new features, or address security vulnerabilities. Follow the manufacturer's instructions carefully when performing updates.

Проблемаларды чечүү

Жалпы маселелер жана чечимдер

Техникалык шарттар

Кепилдик жана колдоо

For warranty information and technical support, please refer to the official Hanwha Techwin webсайтка же ыйгарым укуктуу дилериңизге кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.