FOXWELL NT614 Elite OBD2 сканери үчүн колдонуучу колдонмосу

1. Киришүү

The FOXWELL NT614 Elite is an advanced OBD2 diagnostic scanner designed for comprehensive vehicle system analysis and maintenance. This device provides access to engine, Anti-lock Braking System (ABS), Supplemental Restraint System (SRS), and Transmission diagnostics, in addition to five key service reset functions. This manual outlines the proper procedures for setting up, operating, and maintaining your NT614 Elite scanner.

Figure 1.1: The FOXWELL NT614 Elite OBD2 Scanner and its protective case.

2. Продукт бүтүп калдыview

2.1 Негизги өзгөчөлүктөрү

• 4-Системалык диагностика: Reads and clears fault codes, and displays live data for Engine, ABS, SRS, and Transmission systems.
• 5 Service Reset Functions: Includes ABS Bleeding, Oil Reset, Steering Angle Sensor (SAS) Calibration, Electronic Parking Brake (EPB) Reset, and Throttle Reset.
• Толук OBD2 функциялары: Supports all 10 OBD2 test modes, including I/M Readiness, Live Data Stream, Freeze Frame, O2 Sensor Test, On-Board Monitor Test, Component Test, and Vehicle Information retrieval.
• Lifetime Free WiFi Updates: Provides continuous software updates via WiFi for expanded vehicle coverage and new features.
• Батарея сыноо: реалдуу убакыт батарея көлөмүн көрсөтөтtage for health assessment.
• AutoVIN: Automatically identifies vehicle information for quicker diagnostics (manual VIN entry required for some vehicles).
• DTC издөө: Built-in library for quick fault code definitions.
• Live Data Graphing: Displays multiple data streams simultaneously in graphical format.

2.2 Эмне камтылган

The package for the FOXWELL NT614 Elite includes the following components:

• 1x NT614 Elite Scanner Unit
• 1x коргоочу кап
• 1x Diagnostic Cable (OBDII 16-pin)
• 1x USB кабели
• 1x Колдонуучунун колдонмосу
• 1x Ыкчам колдонмо

Figure 2.1: Contents of the NT614 Elite package.

3. Орнотуу

Follow these steps to prepare your NT614 Elite scanner for use:

1. Унаага туташуу: Locate your vehicle's OBDII port, typically found under the dashboard on the driver's side. Plug the diagnostic cable (16-pin) from the NT614 Elite into the vehicle's OBDII port.
2. Унаа күйгүзүү: Turn the vehicle's ignition to the 'ON' position without starting the engine. This provides power to the OBDII port and the scanner.
3. Scanner Initialization: The NT614 Elite will power on automatically. Follow the on-screen prompts to begin diagnosis or select desired functions.

Figure 3.1: Connection steps for the NT614 Elite scanner.

4. Иштөө нускамалары

4.1 4-System Diagnosis (Engine, ABS, SRS, Transmission)

The NT614 Elite can diagnose four core vehicle systems:

• Кыймылдаткыч системасы: Reads and clears fault codes, displays real-time operating status, and turns off warning lights to ensure proper engine function.
• ABS системасы: Diagnoses issues causing ABS warning lights, reads and clears ABS error codes, and helps prevent wheel locking and skidding.
• SRS системасы: Accesses electronic parameters in the airbag system to diagnose malfunctions and locate faulty components, ensuring safety system functionality.
• Трансмиссия системасы: Reads and clears diagnostic codes from the transmission system, and displays live data to assess speed and load matching with transmission output.

Figure 4.1: ашыкview of 4-System Diagnosis capabilities.

4.2 5 Service Reset Functions

The NT614 Elite provides five essential maintenance reset functions:

• ABS кан агуу: Safely removes air from the brake system after component replacement, restoring firm brake pedal feel.
• EPB баштапкы абалга келтирүү: Allows service and maintenance of electronic parking brake systems, including deactivation, activation, bleeding brake fluid, and setting brakes after pad replacement.
• Майды калыбына келтирүү: Resets the oil life reminder and switches off the oil light after an oil change, ensuring accurate engine oil life calculation.
• SAS калибрлөө: Resets the steering angle sensor to its relative zero position, helping to clear incorrect memory and calibrate the sensor.
• дроссель кайра коюу: Performs throttle body relearn (Idle Relearn) to achieve smooth idle speed after replacing electronic throttle body, disconnecting battery, or clearing a check engine light.

Figure 4.2: Visual representation of the 5 Hot Reset functions.

4.3 Толук OBD2 функциялары

The NT614 Elite supports all standard OBD2 functions, enabling comprehensive emissions-related diagnostics:

• Коддорду окуу (DTC)
• Clear Codes (DTCs)
• I/M даярдыгы абалы
• Live Data Stream
• Фреймдин берилиштерин тоңдуруу
• O2 Sensor Test
• Борттогу монитор тест
• Компоненттик тест
• Retrieve Vehicle Information (VIN, CIN, CVN)
• EVAP Test (Evaporative Emission System Test)

Figure 4.3: ашыкview of Full OBD2 Functions.

4.4 Live Data Graphing

The scanner can display multiple live data streams simultaneously in graphical format, allowing for visual analysis of vehicle performance parameters such as RPM, speed, transmission temperature, and fuel system status.

Figure 4.4: Live Data Graphing interface.

4.5 DTC китепканасы

Access fault code meanings quickly through the exclusive built-in DTC library menu for faster identification of issues.

Figure 4.5: DTC Library feature.

4.6 Battery Health Check

The NT614 Elite can display real-time battery voltage, allowing you to monitor the vehicle's battery health.

Figure 4.6: Battery Health Check display.

5. Техникалык тейлөө

5.1 Программалык камсыздоо жаңыртуулары

The NT614 Elite supports lifetime free software updates via WiFi. Regular updates ensure expanded vehicle coverage, bug fixes, and new features. To update the software:

1. Navigate to the 'Settings' menu on the scanner.
2. Select 'WiFi' and connect to an available wireless network.
3. Once connected, select 'Update' from the main menu or settings.
4. Choose the software packages you wish to update and follow the on-screen instructions.

Figure 5.1: Steps for performing a WiFi software update.

6. Кыйынчылыктарды

If you encounter issues with your NT614 Elite scanner, consider the following:

• Кубат жок: Диагностикалык кабель сканерге да, унаанын OBDII портуна да бекем туташтырылганын текшериңиз. Унаанын от алдыруу системасы "КҮЙҮК" абалында экенин текшериңиз.
• Байланыш катасы: Check that the vehicle's ignition is on. Ensure the diagnostic cable is not damaged. Try connecting to a different vehicle to rule out a vehicle-specific issue.
• Программалык камсыздоону жаңыртуудагы көйгөйлөр: Verify a stable WiFi connection. Ensure sufficient battery charge on the scanner. If issues persist, contact technical support.
• Функция колдоого алынбайт: Vehicle compatibility for specific functions (e.g., ABS Bleeding) varies by make, model, and year. Refer to the compatibility list on the FOXWELL website or contact support for verification.

For further assistance, refer to the support section of the FOXWELL webсайтка же кардарларды тейлөөгө кайрылыңыз.

7. Техникалык шарттар

7.1-сүрөт: Толук мүнөздөмөлөрү бар продукттун этикеткасы.

8. Шайкештик жөнүндө маалымат

The NT614 Elite is compatible with over 10,000 vehicle models from more than 90 brands, including cars, SUVs, minivans, and light trucks. Compatibility for specific functions may vary by vehicle make, model, and year.

To check specific vehicle compatibility:

1. Visit the official FOXWELL website (foxwelltech.us).
2. Navigate to the 'Support' section and select 'Coverage List'.
3. Enter 'NT614 Elite' as the product model.
4. Select your vehicle's brand, model, and year to view compatible functions.

Figure 8.1: Broad vehicle compatibility of the NT614 Elite.

Figure 8.2: Guide to checking vehicle compatibility online.

9. Кепилдик жана колдоо

The FOXWELL NT614 Elite comes with a 2-year reliable warranty. FOXWELL provides lifetime free software updates and 24-hour technical support to assist with any product-related inquiries or issues.

For technical support, please visit the official FOXWELL webсайтка же кардарларды тейлөө тобуна кайрылыңыз.

9.1-сүрөт: Кепилдик жана колдоо жөнүндө маалымат.