1. Киришүү
Thank you for choosing the AQQA Submersible Aquarium Water Pump. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your pump. Please read these instructions thoroughly before use and retain them for future reference.
This submersible pump is designed for various aquatic applications, including aquariums, fish tanks, ponds, and hydroponic systems. It features an adjustable flow rate, ultra-quiet operation, and a high lift capability.
2. Маанилүү коопсуздук нускамалары
- Электр коопсуздугу: электр менен жабдууну камсыз кылуу voltage matches the pump's specifications (110V). Always unplug the pump from the power outlet before performing any maintenance, installation, or when not in use. Do not operate the pump with a damaged cord or plug.
- Сууга түшүү: The pump must be completely immersed in water during operation to prevent dry burning, which can damage the motor and void the warranty.
- Температура: The pump is equipped with an automatic power-off feature if the water temperature exceeds 85°C (185°F) to prevent overheating.
- Жайгашкан жери: Position the pump securely on a flat surface within the water body. Ensure it is not obstructed by debris.
- Балдар жана үй жаныбарлары: Keep the pump and its power cord out of reach of children and pets.
- Колдонуу максаты: This pump is designed for water circulation in aquatic environments. Do not use it for flammable liquids, corrosive chemicals, or other non-water applications.
3. Пакеттин мазмуну
Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:
- AQQA Submersible Water Pump (Model AQ009, 265GPH 15W)
- 1/2 inch (13mm) Nozzle
- 5/8 inch (16mm) Nozzle
- User Manual
Figure 3.1: AQQA Submersible Water Pump with included 13mm and 16mm nozzles.
Figure 3.2: Detailed diagram showing the water outlet, rotary adjustment button, protective water inlet cover, UL cable (6ft, 3-prong plug), handle, and shockproof rubber feet of the 15W pump.
4. Продукциянын өзгөчөлүктөрү
- Жөнгө салынуучу агым ылдамдыгы: A rotary knob allows precise control over water flow.
- Ультра-тынч иштөө: Equipped with a pure copper motor and ceramic shaft impeller for minimal noise.
- Жогорку көтөрүү жөндөмдүүлүгү: Capable of pumping water to a maximum height of 4.9 feet.
- Low Water Level Pumping: Designed to pump water down to 1 inch (approximately 1cm) from the bottom.
- 360° Bottom Suction: Efficiently removes dirt and impurities from the bottom of the tank.
- Коопсуздук өзгөчөлүктөрү: IPX8 waterproof rating and automatic power-off protection against dry burning (if water temperature exceeds 85°C).
- Туруктуу курулуш: Made from Acrylonitrile Butadiene Styrene (ABS) with a durable pure copper motor.
- Интегралдык тутка: A 90° rotating handle for convenient placement and removal.
4.1-сүрөт: Негизги кошумчаtages of the pump, including a silent ceramic shaft, rubber damping anti-slip feet, high-quality motor with anti-dry burning protection (auto power off above 85°C), and a hidden handle for convenience.
Figure 4.2: Illustrates the pump's IPX8 waterproof rating and its durable pure copper motor, highlighting its robust construction.
Figure 4.3: Demonstrates the pump's ability to operate effectively at a low water level, down to approximately 1 cm (0.4 inches) from the bottom.
5. Орнотуу нускамалары
- Чачты тандоо: Choose the appropriate nozzle (13mm or 16mm) for your application. The 13mm nozzle provides a narrower, stronger flow, while the 16mm nozzle offers a wider flow.
- Соплолорду бекитүү: Securely screw the selected nozzle onto the pump's water outlet.
- Жайгашкан жери: Place the pump completely submerged in the water body (aquarium, pond, etc.). Ensure the pump is stable and not resting on loose debris.
- Кубат туташуу: Once the pump is fully submerged, plug the 6ft power cord into a standard 110V electrical outlet.
Figure 5.1: The AQQA pump installed in an aquarium, illustrating the connection of different nozzle sizes for varied water flow requirements.
6. Иштөө нускамалары
- Күйгүзүү: After proper setup and submersion, plug in the pump to start operation.
- Агым ылдамдыгын тууралоо: Locate the 'FLOW VALVE' rotary knob on the side of the pump. Rotate the knob towards '+' to increase the water flow rate, or towards '-' to decrease it. Note that the flow cannot be completely turned off using this knob.
- Мониторинг: Observe the water flow and adjust as needed for your specific application.
- Өчүрүү: To stop the pump, unplug it from the electrical outlet. Always unplug before removing the pump from water.
Сүрөт 6.1: Жакын пландан view of the rotary switch (Flow Valve) on the pump, used to adjust the water flow rate from minimum to maximum.
7. Техникалык тейлөө
Regular cleaning and maintenance will ensure the longevity and optimal performance of your AQQA water pump.
- Кубатты өчүрүү: Ар кандай техникалык тейлөө иштеринен мурун, насосту ар дайым кубат булагынан сууруп коюңуз.
- Суудан алып салыңыз: Carefully remove the pump from the water body.
- Бөлүп салуу: Gently twist and pull the base of the pump to detach it. This will expose the impeller assembly.
- Таза дөңгөлөк: Remove the impeller and clean it thoroughly with a soft brush and clean water to remove any accumulated debris, algae, or mineral deposits. Ensure the impeller shaft is also clean.
- Clean Inlet Cover: Clean the protective water inlet cover to ensure unrestricted water flow.
- Кайра чогултуу: Reassemble the pump by carefully placing the impeller back and securing the base. Ensure all parts are fitted correctly.
- Жыштыгы: Clean the pump regularly, especially if you notice a decrease in flow rate or increased noise.
Figure 7.1: Instructions for easy cleaning: regularly disassemble the base and clean the impeller to prevent blockages and maintain optimal performance.
Figure 7.2: The ceramic impeller, designed for durability and quiet operation in both fresh and saltwater environments.
8. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Насос иштебейт | Электр энергиясы жок Дөңгөлөк тыгылып калды Кургак күйүүдөн коргоо иштетилди | кубат туташуу жана розетка текшерүү Unplug, disassemble, and clean impeller Ensure pump is fully submerged and water temperature is below 85°C |
| Суу агымынын азайышы | Clogged inlet or impeller Flow rate knob set too low Насостогу аба | Unplug, disassemble, and clean pump components Adjust flow rate knob towards '+' Ensure pump is fully submerged and free of air pockets |
| Ашыкча ызы-чуу же титирөө | Импеллер бүтөлүп калган же бузулган Насос туруктуу эмес Кургак чуркоо | Unplug, inspect, and clean impeller. Replace if damaged. Ensure pump is placed on a flat, stable surface Ensure pump is fully submerged in water |
| Насос күтүлбөгөн жерден токтойт | Overheating (dry burning protection) Электр энергиянын үзгүлтүккө учурашы | Check water level and temperature. Allow pump to cool before restarting. Электр камсыздоону текшерүү |
9. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | AQ009 |
| Күч | 15 Вт |
| Тtage | 110V |
| Максималдуу агым ылдамдыгы | 265 GPH (1000 л/саат) |
| Максималдуу көтөрүү бийиктиги | 4.9 фут |
| Продукциянын өлчөмдөрү (L x W x Y) | 4" x 4" x 4" |
| Элемент Салмагы | 0.56 кг (1.23 фунт) |
| Материал | Акрилонитрил бутадиен стирол (ABS) |
| Outlet Connection (Nozzles) | 1/2" (13mm), 5/8" (16mm) |
| Электр шнурунун узундугу | 6 фут |
| Суу өткөрбөйт рейтинги | IPX8 |
Figure 9.1: Comprehensive table detailing product parameters including power, flow rate, head max, power cord length, outlet connections, and voltage for various pump models. This manual focuses on the 15W model.
10. Кепилдик жана колдоо
For warranty information or technical support, please refer to the product packaging or contact AQQA customer service directly. Keep your purchase receipt as proof of purchase.
Кошумча жардам алуу үчүн, сиз иш сапары менен болот AQQA Store on Amazon.
