ATUMTEK ATMS050 Universal TV Stand Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your ATUMTEK ATMS050 Universal TV Stand. Please read this manual thoroughly before installation to ensure correct setup and safe use of the product. This stand is designed to securely hold LCD and LED televisions ranging from 37 to 65 inches, with a maximum weight capacity of 40 kg (88 lbs).

Image: The ATUMTEK ATMS050 Universal TV Stand, showcasing its sleek design and sturdy construction.

Коопсуздук маалыматы

• Салмак чеги: Do not exceed the maximum weight capacity of 40 kg (88 lbs). Overloading can result in serious injury or product damage.
• TV өлчөмү: This stand is suitable for televisions between 37 and 65 inches. Ensure your TV falls within this range.
• VESA шайкештиги: Verify your TV's VESA mounting pattern is compatible with the stand (200x100mm to 600x400mm).
• Туруктуу бети: Телевизордун стендин оодарылып кетпеши үчүн, аны ар дайым тегиз, туруктуу жана тегиз жерге коюңуз.
• Балдар жана үй жаныбарлары: Keep children and pets away from the stand during assembly. Do not allow them to climb on or play with the stand or TV.
• Туура орнотуу: Follow all assembly instructions carefully. If you are unsure about any step, seek professional assistance.
• Үзгүлтүксүз текшерүүлөр: Мезгил-мезгили менен бардык бурамалар менен байланыштарды текшерип туруңуз, алар бекем жана бекем бойдон калууда.

Пакеттин мазмуну

Before beginning assembly, please verify that all parts listed below are present and undamaged. All small parts are individually bagged and numbered for easy identification.

• A. Негизги колдоо тилкеси
• B. Температуралуу айнек базасы
• C. TV Mounting Brackets (2 pcs)
• D. VESA плитасы
• E. Base Support Plate
• F. Anti-Slip Feet (4 pcs)
• G. Кабелдик башкаруу клиптери
• H. Аппараттык комплект (ар кандай бурамалар, шайбалар, сыналгы орнотуу жана стендди чогултуу үчүн бөлгүчтөр)
• I. Assembly Tools (Hex Key, Wrench)

Сүрөт: деталдуу view of the stand's components, including the main column, base, and mounting brackets, along with features like cable management, non-slip feet, and safety lock mechanism.

Монтаждоо көрсөтмөлөрү

Assembly typically takes about 15 minutes. Two necessary tools are provided in the package. Follow these steps carefully:

1. Attach Anti-Slip Feet to Base: Carefully place the tempered glass base (B) on a soft, clean surface. Attach the four anti-slip feet (F) to the designated spots on the underside of the glass base.
2. Assemble Base Support Plate: Secure the base support plate (E) to the tempered glass base (B) using the provided screws and the hex key. Ensure it is centered and tightened securely.
3. Attach Main Support Column: Connect the main support column (A) to the base support plate (E) using the appropriate screws. Ensure the column is upright and firmly attached.
4. Install VESA Plate: Attach the VESA plate (D) to the top of the main support column (A) using the provided screws.
5. Сыналгыга монтаждоо кронштейндерин тагыңыз: Identify the correct screws, washers, and spacers from the hardware kit (H) that fit your television's VESA mounting holes. Attach the two TV mounting brackets (C) to the back of your television. Ensure the brackets are level and securely fastened.
6. Телевизорду стендге орнотуу: Carefully lift your television and hook the TV mounting brackets (C) onto the VESA plate (D) on the stand. Ensure the TV is properly seated and engaged with the safety lock mechanism.
7. Коопсуз сыналгы: Use the safety screws or clips to secure the TV mounting brackets to the VESA plate, preventing accidental dislodgement.
8. Кабелдик башкаруу: Route your TV cables through the hollow central column and secure them with the cable management clips (G) for a tidy appearance.

Image: Diagram illustrating VESA mounting patterns (200x100mm to 600x400mm) and overall dimensions of the stand, confirming compatibility for 37-65 inch TVs up to 40kg.

Иштөө нускамалары

Бийиктигин тууралоо

The ATUMTEK ATMS050 TV stand offers multiple height adjustment levels to optimize your viewing experience. The TV mounting brackets can be positioned at 3 different height levels on the main support column. To adjust the height:

1. Carefully remove the TV from the VESA plate.
2. Adjust the position of the TV mounting brackets (C) on the VESA plate (D) to your desired height level.
3. Re-mount the TV onto the stand, ensuring it is securely hooked and the safety lock is engaged.

Айлануу функциясы

The stand features a swivel mechanism allowing you to adjust the viewing angle. You can pivot your television up to 30 degrees to the left or right.

• Телевизоруңуздун капталдарынан акырын кармаңыз.
• Carefully rotate the TV to the desired left or right angle. The stand's pivot mechanism is designed for smooth movement.

Image: Illustration demonstrating the 30-degree swivel capability and the three available height adjustment levels for the TV mounting brackets.

Техникалык тейлөө

• Тазалоо: Трибунаны жумшак, кургак чүпүрөк менен сүртүңүз. Өжөр тактар ​​үчүн бир аз сүртүңүз.amp жумшак самын менен чүпүрөктү колдонсо болот, андан кийин кылдат кургатуу. Абразивдүү тазалагычтардан же эриткичтерден качыңыз.
• Текшерүүлөр: Periodically inspect all connections and screws to ensure they remain tight. Re-tighten if necessary.
• Айнек багуу: The tempered glass base is durable, but avoid dropping heavy objects on it or subjecting it to sharp impacts.

Проблемаларды чечүү

Issue: TV is not stable or wobbles.

Чечим:

• Бардык монтаж бурамалары толугу менен бекемделгенин текшериңиз.
• Verify the stand is placed on a flat, level, and stable surface.
• Check that the TV's weight and size are within the specified limits (max 40kg, 37-65 inches).
• Confirm the anti-slip feet are properly attached to the base.

Issue: TV does not fit the mounting brackets.

Чечим:

• Check your TV's VESA mounting pattern. It must be between 200x100mm and 600x400mm.
• Ensure you are using the correct screws, washers, and spacers from the hardware kit for your specific TV model.

Issue: Cables are messy.

Чечим:

• Utilize the integrated cable management system by routing cables through the hollow central column and securing them with the provided clips.

Техникалык шарттар

Кепилдик жана колдоо

ATUMTEK provides a 3 жылдык кепилдик against manufacturer defects for this product. This warranty covers defects in materials and workmanship under normal use.

For technical support, warranty claims, or any questions regarding your ATUMTEK ATMS050 Universal TV Stand, please contact ATUMTEK customer service. Refer to the product packaging or the official ATUMTEK webакыркы байланыш маалыматы үчүн сайт.

Кепилдик тейлөө үчүн сатып алуу далилиңизди сактап коюңуз.