Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Netcomm Wireless Internet Router IFWA 40. This device is designed to provide reliable 4G LTE Wi-Fi connectivity, allowing you to connect up to 20 devices and create a Wireless Local Area Network (WLAN) anywhere.
Продукт бүттүview
Алдыңкы панелдин көрсөткүчтөрү
The front panel of the IFWA 40 features several LED indicators that provide status information about the device's operation.
- Power LED: Аппараттын кубат абалын көрсөтөт.
- Voicemail LED: Indicates new voicemail messages (if phone service is configured).
- Wi-Fi LED: Wi-Fi тармагынын абалын көрсөтөт.
- Маалымат LED: Provides general status or notification alerts.
- Батарея LED: Displays the battery charge level and charging status.
- Signal Bars: Indicates the strength of the 4G LTE cellular signal.

Сүрөт 1: Алдыңкы view of the Netcomm IFWA 40 Wireless Internet Router, showing the AT&T logo and a row of LED indicators for power, voicemail, Wi-Fi, information, battery, and signal strength.

2-сүрөт: Дагы бир фронт view of the Netcomm IFWA 40 Wireless Internet Router, highlighting its compact design and the arrangement of the status indicator lights.
Арткы панелдин порттору жана баскычтары
Арткы панелде туташуу параметрлери жана башкаруу баскычтары бар.
- LAN порту: One Gigabit Ethernet (1000Mbps) port for wired network connections.
- Телефон порттору: Two Analog Phone Jacks for connecting landline phones.
- Күйгүзүү/өчүрүү баскычы: Power button for turning the device on or off.
- Электр порту: AC кубат адаптерин туташтыруу үчүн.
- Калыбына келтирүү баскычы: Аппаратты баштапкы абалга келтирүү үчүн колдонулат.
- Антенна порттору: Two SMA cellular antenna ports for external antennas to improve signal reception.

3-сүрөт: Арткы view of the Netcomm IFWA 40 Wireless Internet Router, displaying the LAN port, two phone ports, power input, on/off button, reset button, and two external antenna ports.
Каптал панели
The side of the device features a WPS button for easy Wi-Fi Protected Setup.
- WPS баскычы: For quickly connecting WPS-compatible devices to the Wi-Fi network without entering a password.

4-сүрөт: Каптал view of the Netcomm IFWA 40 Wireless Internet Router, showing the WPS (Wi-Fi Protected Setup) button.
Жалпы диаграмма

Figure 5: Comprehensive diagram illustrating the various components and ports of the Netcomm IFWA 40 Wireless Internet Router, including front panel LEDs, rear ports (Ethernet, Phone, AC Adapter, Antenna), and the Battery/SIM Tray location.
Жайгашуу
1. SIM картаны кыстарыңыз
The Netcomm IFWA 40 uses a Nano SIM card. Locate the SIM card slot, typically found under the battery cover or in a dedicated tray. Carefully insert your activated Nano SIM card into the designated slot until it clicks into place.
2. Кубатты туташтырыңыз
Connect the provided AC power adapter to the Power port on the rear of the router and then plug the adapter into a wall outlet. The Power LED on the front panel should illuminate.
3. Power On the Device
Press the On/Off button on the rear panel to power on the router. Wait for the device to boot up. The Signal bars LED should eventually show signal strength, indicating a successful connection to the 4G LTE network.
4. Түзмөктөрдү туташтырыңыз
- Wi-Fi: Locate the Wi-Fi network name (SSID) and password, usually found on a label on the bottom of the router. Connect your Wi-Fi enabled devices (phones, tablets, laptops) to this network. The router supports dual-band Wi-Fi and can connect up to 20 devices simultaneously.
- Ethernet: For wired connections, connect an Ethernet cable from the LAN port on the router to your computer or other network device.
- Телефон: Connect analog phones to the Phone ports if you are using the voice service feature.
5. Access Control Panel
To manage settings, access the router's control panel by opening a web browser on a connected device and navigating to att.wirelessinternet or 192.168.0.1. Log in using the default credentials (usually found on the router's label or in the quick start guide).
Иштөө нускамалары
Wi-Fi туташуусу
The router provides a robust Wi-Fi network. Ensure your devices are within range for optimal performance. The dual-band Wi-Fi allows for flexible connection options, with 10 devices per band for a total of 20 Wi-Fi connections.
WPS функциясы
For quick and secure Wi-Fi connections with WPS-compatible devices, press the WPS button on the side of the router, then activate WPS on your client device within two minutes.
Батареянын камдык көчүрмөсү
The Netcomm IFWA 40 includes a removable 3000mAh Li-ion battery. In the event of a power outage, the device can operate on battery power for up to 29 hours in standby mode and provide up to 180 minutes of active use time.
Техникалык тейлөө
- Тазалоо: Use a soft, dry cloth to clean the exterior of the router. Avoid using liquid cleaners or aerosols.
- Вентиляция: Ensure the router is placed in a well-ventilated area to prevent overheating. Do not block any ventilation openings.
- Программалык камсыздоонун жаңыртуулары: Periodically check the router's control panel for available firmware updates to ensure optimal performance and security.
- Батареяга кам көрүү: If the device is not used for extended periods, it is recommended to fully charge the battery and store it in a cool, dry place.
Проблемаларды чечүү
Интернет байланышы жок
- Check the Signal bars LED on the front panel. If no signal is present, try repositioning the router or connecting external antennas.
- Ensure your Nano SIM card is properly inserted and activated with your service provider.
- Verify that the router's power adapter is securely connected and the Power LED is on.
- Restart the router by powering it off and then on again.
Wi-Fi туташуу маселелери
- Ensure the Wi-Fi LED is illuminated.
- Check that you are entering the correct Wi-Fi password (SSID and password are on the router's label).
- Сигналдын күчүн жакшыртуу үчүн роутерге жакыныраак жылууга аракет кылыңыз.
- If many devices are connected, try disconnecting some to see if performance improves.
Түзмөк жооп бербей жатат
- If the router becomes unresponsive, press and hold the Reset button on the rear panel for about 10 seconds to restore factory default settings. Эскертүү: This will erase all custom settings, including Wi-Fi name and password.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Netcomm |
| Модел | IFWA-40 / MR1100 |
| RAM эс тутуму | 512 MB |
| Операция системасы | Linux 3.18.31 |
| Processor Chipset | Qualcomm Snapdragon X16 (1.2GHz quad-core) |
| Шайкеш түзмөктөр | Ноутбук, планшет, смартфон |
| Өзгөчөлүктөр | WPS |
| Кубат булагынын түрү | Battery / AC Adapter |
| Батарея сыйымдуулугу | 3000mAh Li-ion (removable) |
| Маалыматтарды өткөрүү ылдамдыгы | Up to 1000 Megabits Per Second (Ethernet) |
| Зымсыз стандарт | 802.11ac (Dual-Band Wi-Fi) |
| Жыштык | 1.2 GHz (Processor) |
| Порттардын саны | 1x Gigabit Ethernet, 2x Analog Phone Jack, 2x SMA Cellular Antenna Ports |
| SIM Type Supported | Nano SIM |
| Өлчөмдөрү (L x W x Y) | 17.8 x 15.2 x 2.5 см |
| Салмагы | 1.1 кг |
Кепилдик жана колдоо
This Netcomm Wireless Internet Router IFWA 40 is a renewed product. As such, it is covered by the Amazon жаңыланган кепилдик. If you are not satisfied with your purchase, renewed products are eligible for replacement or refund under this guarantee. Please refer to the Amazon Renewed program terms and conditions for full details regarding warranty coverage and support for renewed products.
For further assistance, please contact Amazon customer support or refer to the Amazon Renewed program documentation.





