1. Киришүү
The Jansite TPMS (Tire Pressure Monitoring System) is designed to enhance driving safety by providing real-time monitoring of your vehicle's tire pressure and temperature. This solar-powered wireless system includes a display unit and four external sensors, offering comprehensive alerts for various tire conditions. It is compatible with a wide range of vehicles including cars, SUVs, sedans, MPVs, and RVs.
Image: The Jansite TPMS display unit with a solar panel and four external tire pressure sensors labeled F.L (Front Left), F.R (Front Right), R.L (Rear Left), and R.R (Rear Right).
2. Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- 1 x TPMS Display Unit (Solar Powered)
- 4 x External Tire Pressure Sensors
- 4 x Anti-theft Nuts
- 1 x Spanner/Wrench for Sensor Installation
- 1 x USB заряддоо кабели
- 1 x Колдонуучунун колдонмосу (бул документ)
3. Орнотуу жана орнотуу
3.1. Display Unit Placement
Place the TPMS display unit on your vehicle's dashboard in a location where it receives direct sunlight for optimal solar charging and does not obstruct your view of the road. Ensure it is stable and secure.
Image: The TPMS display unit positioned on a car dashboard, illustrating its compact size and clear display of tire data.
3.2. Сенсорду орнотуу
Follow these steps to install the external tire pressure sensors:
- Клапанды даярдоо: Unscrew the original valve cap from the tire valve stem.
- Install Anti-theft Nut: Screw an anti-theft hexagonal nut onto the valve stem. Do not tighten it yet.
- Сенсорду орнотуу: Screw the corresponding sensor (F.L for Front Left, F.R for Front Right, R.L for Rear Left, R.R for Rear Right) onto the valve stem until it is hand-tight.
- Secure Sensor: Use the provided spanner/wrench to tighten the anti-theft nut against the sensor. This prevents unauthorized removal and ensures a secure fit.
- Агышууларды текшерүү: After installation, apply soapy water around the valve stem and sensor connection. Observe for bubbles, which would indicate an air leak. If a leak is detected, re-tighten the sensor and nut.
Image: A visual guide demonstrating the sensor installation process: unscrewing the valve cap, screwing on the anti-theft nut, screwing on the sensor, tightening the nut with a wrench, and checking for air leaks with soapy water.
Маанилүү: Ensure the sensors are installed on the correct tire positions (Front Left, Front Right, Rear Left, Rear Right) as indicated on the sensors themselves to match the display unit's readings.
4. Операция
4.1. Күйгүзүү/өчүрүү
The display unit features intelligent vibration sensing. It will automatically turn on when it detects vehicle movement (vibration) and turn off after a few minutes of no vibration to conserve power.
4.2. Charging the Display Unit
The display unit can be charged via two methods:
- Күн кубаты: The integrated solar panel charges the unit when exposed to sunlight.
- USB заряддоо: For cloudy or rainy weather, or when solar charging is insufficient, use the provided USB cable to charge the unit via a USB power source.
Image: The TPMS display unit highlighting its solar panel for charging and a side view showing the USB charging port, indicating dual charging capabilities.
4.3. Real-time Monitoring Display
The LCD display shows real-time pressure and temperature for all four tires. Key indicators include:
- Шина басымы: Displayed in Bar or PSI (user selectable).
- Шина температурасы: Displayed in °C or °F (user selectable).
- Күн кубаттоо көрсөткүчү: Shows when the unit is actively charging via solar power.
- Батарея деңгээлинин көрсөткүчү: Displays the current battery status of the display unit.
Image: A close-up of the TPMS display unit showing detailed real-time information for each tire, including pressure, temperature, and system status indicators like solar charging and battery level.
4.4. Ойготкуч режимдери
The system provides six automatic alarm modes to alert you to potential tire issues:
- Low Pressure Warning: Alerts when tire pressure drops below a preset threshold.
- Leakage Warning: Detects rapid air loss from a tire.
- Жогорку басым жөнүндө эскертүү: Alerts when tire pressure exceeds a preset threshold.
- Жогорку температура эскертүүсү: Alerts when tire temperature exceeds a preset threshold.
- Battery Low Power Warning: Indicates that the display unit's battery is low.
- Sensor Battery Low Warning: Indicates that a sensor's battery is low.
Image: The TPMS display unit illustrating various alarm icons for low pressure, leakage, high pressure, high temperature, and low battery, emphasizing comprehensive safety monitoring.
5. Техникалык тейлөө
5.1. Sensor Battery Replacement
The external sensors are powered by replaceable Lithium Ion coin cell batteries (commonly CR1632). When a "Sensor Battery Low" warning appears on the display, replace the battery:
- Unscrew the sensor from the valve stem using the spanner/wrench.
- Сенсорду кылдаттык менен ачыңыз casing.
- Remove the old battery and insert a new CR1632 battery, ensuring correct polarity.
- Сенсорду жабуу casing securely and re-install the sensor on the tire valve, following the installation steps in Section 3.2.
5.2. Тазалоо
Wipe the display unit and sensors with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the components.
6. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Display unit not turning on. | Low battery or no vibration detected. | Charge the display unit via solar or USB. Ensure the vehicle is moving for the vibration sensor to activate. |
| No tire data displayed or slow updates. | Sensor not paired, sensor battery dead, or signal interference. | Check sensor battery and replace if necessary. Ensure sensors are securely installed. Drive the vehicle for a few minutes to allow sensors to transmit data. If issues persist, refer to pairing instructions (if available in a more detailed manual) or contact support. |
| "Sensor Battery Low" warning. | Sensor battery is depleted. | Replace the battery in the indicated sensor (refer to Section 5.1). |
| Air leakage after sensor installation. | Sensor or anti-theft nut not tightened correctly. | Re-tighten the sensor and anti-theft nut using the provided wrench. Apply soapy water to confirm the leak is resolved. |
7. Техникалык шарттар
- Бренд: Jansite
- Модел: Jansite
- Мониторинг диапазону: 0-62 PSI (approximate)
- Кубат булагы (дисплей): Solar / USB Charging
- Сенсор түрү: Тышкы
- Сенсордун батареясы: Replaceable Lithium Ion coin cell (e.g., CR1632)
- Waterproof Rating (Sensors): IPX7
- Пакеттин өлчөмдөрү: 5.59 x 5.51 x 2.05 дюйм
- Шайкештик: Car, SUV, ORV, MPV, Minibus, Wagon
Image: Illustrates the IPX7 waterproof capability of the sensors and icons representing various compatible vehicle types, including cars, SUVs, and MPVs.
8. Кепилдик жана колдоо
For warranty information, technical support, or any questions regarding your Jansite TPMS, please refer to the contact information provided with your purchase or visit the official Jansite webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.
