Introduction
The LAUNCH CRP129 Premium is a professional diagnostic tool designed for automotive technicians and enthusiasts. It provides comprehensive diagnostic capabilities for four major vehicle systems: Engine, Transmission (A/T), Anti-lock Braking System (ABS), and Supplemental Restraint System (SRS/Airbag). This device supports all 10 test modes of OBD II, including enhanced OBD II Mode 6, and offers advanced reset functions for Oil Service Light, Electronic Parking Brake (EPB), Steering Angle Sensor (SAS), and Battery Management System.
With its intuitive interface, 4.0-inch TFT full-color display, and robust design, the CRP129 Premium allows users to efficiently read and clear diagnostic trouble codes (DTCs), view live data streams, freeze frame data, and I/M readiness status. It supports a wide range of vehicle makes and models, providing a powerful solution for diagnosing drive-ability issues and performing essential maintenance tasks.
Пакеттин мазмуну
- 1x LAUNCH CRP129 Premium Diagnostic Tool
- 1x OBDII кабели
- 1x заряддоо кабели (USB)
- 1x Ташуу сумкасы
- 1x Колдонуучунун колдонмосу (бул документ)
Орнотуу жана баштапкы колдонуу
Follow these steps to set up and begin using your CRP129 Premium diagnostic tool:
- OBD-II портун табыңыз: The OBD-II (On-Board Diagnostics II) port is typically located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's owner's manual if you cannot locate it.
- OBDII кабелин туташтырыңыз: Plug one end of the provided OBDII cable into the 16-pin connector on the CRP129 Premium device.
- Унаага туташуу: Plug the other end of the OBDII cable into the vehicle's OBD-II port. The device will power on automatically, drawing power directly from the vehicle's battery.
- Күйгүзүү: Once connected, the CRP129 Premium will power on. The screen will display the LAUNCH logo and then the main menu.
- Тил тандоо: If prompted, select your preferred language (English, Spanish, or French are supported).
Image: The CRP129 Premium diagnostic tool being held and connected to a vehicle's OBD-II port, illustrating the setup process.
Иштөө нускамалары
The CRP129 Premium features a user-friendly interface with a 4.0-inch color display and intuitive button operation. Use the directional pad (up, down, left, right) to navigate menus, the "OK" button to confirm selections, and the "ESC" button to go back.
Сүрөт: алдыңкы view of the CRP129 Premium, highlighting its display and navigation buttons for operation.
Диагностикалык функциялар
- Системаны сканерлөө: Select "Diagnose" from the main menu. The tool will automatically identify the vehicle and scan for available systems (Engine, Transmission, ABS, SRS).
- Окуу коддору: Displays current, pending, and permanent Diagnostic Trouble Codes (DTCs) for the selected system. Each code comes with a brief description.
- Таза коддор: Erases DTCs from the vehicle's computer. Ensure the underlying issue is resolved before clearing codes to prevent them from reappearing.
- Live Data Stream: Displays real-time data parameters from the vehicle's sensors. Data can be viewed in numerical or graphical format. Key parameters include engine speed, vehicle speed, coolant temperature, O2 sensor position, MAF/airflow, and short/long term fuel trims.
- Кадр дайындарын тоңдуруп коюу: Captures a snapshot of sensor data at the moment a DTC was set, providing valuable information for diagnosis.
- I/M даярдыгы абалы: Унаанын эмиссияны текшерүүгө даяр экендигин аныктоо үчүн эмиссияга байланыштуу мониторлордун абалын текшерет.
- Enhanced OBD II Mode 6: Provides access to test results for non-continuously monitored systems.
Функцияларды баштапкы абалга келтирүү
The CRP129 Premium offers several special reset functions:
- Май тейлөө жарыгын баштапкы абалга келтирүү: Resets the oil maintenance light after an oil change.
- Electronic Parking Brake (EPB) Release: Allows for safe deactivation and reactivation of the electronic parking brake system for brake pad replacement.
- Рулдук бурч сенсорун (SAS) баштапкы абалга келтирүү: Calibrates the steering angle sensor after steering system repairs or alignment.
- Батареяны баштапкы абалга келтирүү: Performs battery registration or adaptation after replacing the vehicle's starter battery.
Программалык камсыздоо жаңыртуулары
The CRP129 Premium supports lifetime free internet updates via USB 2.0. To update the software:
- Visit the official LAUNCH website (refer to the device's packaging or back label for the exact URL).
- Download and install the update tool software on your PC.
- Connect the CRP129 Premium to your PC using the provided USB cable.
- Follow the on-screen instructions in the update tool to download and install the latest software versions for your device.
Техникалык тейлөө жана кам көрүү
- Тазалоо: Аппаратты тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Сактагыч: Түзмөктү көтөрүүчү баштыкта, салкын, кургак жерде, күн нуру түз тийбеген жана өтө жогорку температурадан алыс сактаңыз.
- Кабельге кам көрүү: Avoid bending or twisting the OBDII cable excessively. Always grasp the connector when plugging or unplugging.
- Программалык камсыздоо жаңыртуулары: Regularly check for and install software updates to ensure optimal performance and compatibility with new vehicle models.
Проблемаларды чечүү
If you encounter issues with your CRP129 Premium, consider the following common troubleshooting steps:
- Түзмөк күйбөй жатат:
- Ensure the OBDII cable is securely connected to both the device and the vehicle's OBD-II port.
- Verify the vehicle's ignition is in the ON position (engine can be off).
- Check the vehicle's fuse for the OBD-II port (usually labeled "CIGAR" or "ACC").
- Байланыш катасы:
- Confirm the vehicle supports the OBD-II standard (most vehicles from 1996 onwards).
- От алдыргычтын КҮЙҮК абалда экенин текшериңиз.
- Try connecting to a different vehicle to rule out a vehicle-specific issue.
- Check for any loose connections in the OBDII cable.
- Incorrect Readings/Codes:
- Программанын жаңыртылганын текшериңиз.
- Verify the vehicle information (VIN, year, make, model) is correctly identified by the tool.
For persistent issues, refer to the official LAUNCH support resources or contact their customer service.
Техникалык мүнөздөмөлөр
Image: The back of the CRP129 Premium device, displaying its technical specifications label.
| Өзгөчөлүк | Спецификация |
|---|---|
| Дисплей | 4.0" TFT full color display |
| Тtage Диапазон | 12Vdc (via OBD interface) |
| Иштөө температурасы | 0°Cден 50°Cге чейин (32°F—122°F) |
| Сактоо температурасы | -20°Cден 70°Cге чейин (-4°Fтен 158°Fге чейин) |
| Өлчөмдөр | 196 x 106 x 32 мм |
| Салмагы | Болжол менен 680 г |
| Байланыш | Standardized 16-pin OBD connector, USB 2.0 |
| Колдоого алынган протоколдор | J1850 PWM, J1850 VPW, ISO9141-2, ISO14230-4, ISO 15765 (CAN) |
| Түс | Кызыл |
| Өндүрүүчү | Launch Tech |
Колдоо жана кепилдик
For technical support, product inquiries, or warranty information, please contact LAUNCH customer service. Details can typically be found on the official LAUNCH webсайтына же продуктунун таңгагына караңыз. Кепилдик талаптары үчүн сатып алуунун далили катары сатып алуу дүмүрчөгүңүздү сактап коюңуз.
Regular software updates are available for free to ensure your device remains compatible with the latest vehicle models and diagnostic protocols.
