Novastar MCTRL300 синхрондуу LED дисплей контроллери Колдонуучунун колдонмосу

1. Киришүү

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Novastar MCTRL300 Synchronous LED Display Controller. The MCTRL300 is designed to send video and audio signals to LED display screens, supporting resolutions up to 2048×668@60Hz. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. Продукт бүтүп калдыview

2.1 Негизги өзгөчөлүктөрү

• 1 × DVI input for video sources.
• 1 × audio input for sound integration.
• 1 × type-B USB control port for computer communication.
• UART control ports for cascading multiple devices.
• Dual Ethernet outputs for connecting to LED display panels.
• Supports NovaStar calibration technology for efficient display adjustment.
• 1 × light sensor connector for automatic brightness adjustment.
• Supports resolutions up to 2048×668@60Hz and downward compatibility.
• Compatible with a variety of video formats.

2.2 Компоненттер жана интерфейстер

The Novastar MCTRL300 features a robust design with clearly labeled ports for easy connectivity.

1-сүрөт: Фронт view of the Novastar MCTRL300 LED Display Controller. The front panel displays the model name "MCTRL300 LED Display Controller".

2-сүрөт: Side view of the Novastar MCTRL300, showing the mounting brackets and the overall compact form factor.

3-сүрөт: Rear panel of the Novastar MCTRL300, illustrating all input and output ports. From left to right: Power switch, AC power input, Ethernet outputs (OUT1, OUT2), Audio input, USB Type-B control port, DVI input, UART IN/OUT, and Light Sensor connector. Status LEDs (RUN, STATUS) are also visible.

4-сүрөт: Жакын план view of the Novastar MCTRL300 rear panel, providing a clearer look at the port labels and power specifications (AC 100-240V~50/60Hz).

3. Орнотуу

3.1 Аппаратты туташтыруу

1. Кубат туташуу: Connect the provided AC power cable to the power input port on the rear panel (refer to Figure 3). Ensure the power switch is in the "OFF" position before connecting.
2. Video Input: Connect your video source (e.g., computer, media player) to the DVI input port using a DVI cable.
3. Аудио киргизүү: If audio is required, connect your audio source to the audio input port.
4. LED дисплейдин туташуусу: Connect the Ethernet output ports (OUT1, OUT2) to your LED display receiving cards using standard Ethernet cables. The MCTRL300 features dual Ethernet outputs for increased capacity.
5. Control Connection: Connect the USB Type-B port to your computer using a USB cable. This connection is necessary for configuring the display and managing content via Novastar control software.
6. Light Sensor (Optional): If automatic brightness adjustment is desired, connect a compatible light sensor to the dedicated light sensor connector.
7. UART Ports (Optional): For cascading multiple MCTRL300 units or other compatible devices, use the UART IN and UART OUT ports.

3.2 Баштапкы күйгүзүү

After all connections are securely made, switch the power button on the rear panel to the "ON" position. The "RUN" and "STATUS" indicator lights on the rear panel should illuminate, indicating the device is powered on and operating.

4. Иштөө нускамалары

4.1 Программанын конфигурациясы

The Novastar MCTRL300 is configured and controlled using Novastar's proprietary software (e.g., NovaLCT).

• Install the latest version of the Novastar control software on your computer.
• Connect the MCTRL300 to your computer via the USB Type-B port.
• Launch the software and establish communication with the controller.
• Configure the LED display parameters, including resolution, screen mapping, brightness, and color settings, according to your specific LED panel setup.
• Utilize the NovaStar calibration technology features within the software for optimal display uniformity.

4.2 Displaying Content

Once configured, the MCTRL300 will automatically process the incoming DVI video signal and transmit it to the connected LED display. Ensure your video source is outputting a compatible resolution and refresh rate as configured in the software.

5. Техникалык тейлөө

5.1 Тазалоо

• Аппараттын сыртын жумшак, кургак чүпүрөк менен дайыма тазалап туруңуз.
• Do not use liquid cleaners or aerosol sprays directly on the unit.
• Ensure ventilation slots are free from dust and obstructions to prevent overheating.

5.2 Айлана-чөйрөнү коргоо

• Operate the MCTRL300 in a well-ventilated area.
• Аппаратты экстремалдык температурага, жогорку нымдуулукка же тике күн нуруна тийгизүүдөн сактаңыз.
• Keep the device away from sources of strong electromagnetic interference.

6. Кыйынчылыктарды

6.1 Жалпы маселелер жана чечимдер

• Кубат жок:
  • Кубат кабелинин түзмөккө да, розеткага да бекем туташтырылганын текшериңиз.
  • Ensure the power switch on the rear panel is in the "ON" position.
  • Электр розеткасынын иштешин текшериңиз.
• No Display on LED Screen:
  • Confirm the DVI input cable from the video source is properly connected.
  • Check the Ethernet cables connecting the MCTRL300 to the LED display receiving cards.
  • Verify that the LED display is powered on and configured correctly in the Novastar software.
  • Ensure the video source is outputting a signal and that its resolution matches the controller's configuration.
• Control Software Cannot Connect:
  • Ensure the USB Type-B cable is securely connected between the MCTRL300 and the computer.
  • Verify that the correct USB drivers are installed on your computer.
  • Restart the control software and the MCTRL300.
• Abnormal Display (e.g., flickering, incorrect colors):
  • Check the display parameters in the Novastar control software.
  • Perform a screen calibration using the software.
  • Ensure the DVI cable is not damaged and is securely connected.

If issues persist after attempting these troubleshooting steps, please contact Novastar technical support.

7. Техникалык шарттар

8. Кепилдик жана колдоо

For information regarding warranty coverage, technical support, or service, please refer to the official Novastar website or contact your authorized Novastar dealer. Keep your purchase receipt as proof of purchase for warranty claims.