1. Киришүү
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Antminer S19 Pro 110TH/s Bitcoin Miner. Designed for high-performance cryptocurrency mining, this unit is optimized with Braiins OS+ firmware to deliver enhanced hash power and energy efficiency. Please read this manual thoroughly before operating the device to ensure proper functionality and safety.
2. Коопсуздук маалыматы
Always adhere to the following safety guidelines to prevent damage to the unit, personal injury, or property damage:
- Тtage Талап: This unit requires a 240V power supply. It will not operate on 110V. Using incorrect voltage may prevent startup or cause severe damage to the unit.
- Вентиляция: Ensure adequate airflow around the miner to prevent overheating. Do not block air vents.
- Курчап турган чөйрө: Operate the miner in a clean, dry, and temperature-controlled environment. Avoid excessive dust, humidity, and extreme temperatures.
- Кубат туташуу: Use only the provided power cables and ensure they are securely connected. Do not overload electrical circuits.
- Колдонуу: Агрегатты кылдаттык менен колдонуңуз. Аны түшүрүүдөн же катуу таасирлерге дуушар кылуудан алыс болуңуз.
3. Продукт бүтүп калдыview
The Antminer S19 Pro 110TH/s is a robust Bitcoin mining device featuring advanced cooling and a powerful hash board. Key components include the control board, hash boards, and cooling fans.
Негизги өзгөчөлүктөрү:
- Boosted to 120TH with Braiins Firmware: Optimized with Braiins OS+ to increase performance from 110TH to 120TH for maximum mining efficiency.
- Lower Power Consumption, Higher Profitability: Thanks to Braiins firmware, this miner uses less electricity while delivering more hash rate, reducing operational costs and increasing ROI.
- Tested, Cleaned, and Ready to Run: Each unit is carefully tested, cleaned, and delivered ready for deployment.
Компоненттин идентификациясы:
Сүрөт 3.1: Алдыңкы-сол view of the Antminer S19 Pro, showing the main casing and two large cooling fans on the side.
3.2-сүрөт: Арткы view of the Antminer S19 Pro, highlighting the power input ports and smaller exhaust fans.
3.3-сүрөт: Жогорку view of the Antminer S19 Pro, showing the network port, SD card slot, and status indicator lights.
4. Орнотуу нускамалары
Follow these steps to set up your Antminer S19 Pro:
- Пакеттен чыгаруу: Carefully remove the miner from its packaging. Inspect for any visible damage.
- Жайгашкан жери: Place the miner on a stable, flat surface in a well-ventilated area. Ensure at least 20 cm of clear space around all sides for optimal airflow.
- Кубат туташуу: Connect the 240V power cables to the miner's power input ports. Ensure the power source is capable of providing the required wattage (3250W).
- Тармак туташуусу: Connect an Ethernet cable from your router or network switch to the miner's Ethernet port.
- Баштапкы күйгүзүү: Once all connections are secure, power on the unit. The miner will perform a self-check.
5. Иштөө нускамалары
After initial setup, configure your miner for operation:
- кирүү Web Интерфейс: Locate the miner's IP address using an IP scanner tool on your network. Enter this IP address into a web browser to access the miner's control panel.
- Кирүү: Enter the default username and password (refer to the miner's documentation or common Antminer defaults if not provided).
- Pool Configuration: Navigate to the 'Miner Configuration' or 'Pool Settings' section. Enter your mining pool URL, worker name, and password.
- Save and Apply: Save the settings and apply them. The miner will restart its hashing process with the new configuration.
- Мониторинг: Monitor the miner's status, hash rate, and temperature through the web interface to ensure stable operation.
6. Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your Antminer S19 Pro:
- Чаңды тазалоо: Periodically clean dust from the fans and heat sinks using compressed air. Ensure the miner is powered off and unplugged before cleaning.
- желдеткич текшерүү: Check cooling fans for any obstructions or signs of wear. Replace damaged fans promptly.
- Программалык камсыздоонун жаңыртуулары: Check the official Antminer or Braiins OS+ website for firmware updates. Apply updates as recommended to improve performance and security.
- Экологиялык көзөмөл: Maintain a stable operating environment with appropriate temperature and humidity levels.
7. Кыйынчылыктарды
Жалпы маселелер жана аларды чечүү жолдору:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Шахтер күйбөйт. | Туура эмес томtage (110V instead of 240V), loose power cables, power supply failure. | Verify 240V power supply. Check all power cable connections. Test power supply if possible. |
| No hash rate/Low hash rate. | Incorrect pool settings, network issues, faulty hash board, overheating. | Verify pool configuration. Check network connectivity. Ensure proper ventilation. Inspect hash boards. |
| Miner offline. | Network cable disconnected, router issue, incorrect IP address. | Check Ethernet cable. Restart router/switch. Verify miner's IP address. |
| Ашыкча ысып кетүү. | Blocked airflow, dusty fans, high ambient temperature. | Clear obstructions. Clean fans. Improve room ventilation or cooling. |
Эгер көйгөйлөр чечилбесе, кардарларды колдоо кызматына кайрылыңыз.
8. Техникалык шарттар
Detailed technical specifications for the Antminer S19 Pro 110TH/s:
| Атрибут | Нарк |
|---|---|
| Модель аты | S19 Pro 110Th/s |
| Бренд | Кумурска казуучу |
| Продукциянын өлчөмдөрү (L x W x Y) | 15 x 8 x 11 дюйм |
| Элемент Салмагы | 36 фунт |
| Чыгуу Wattage | 3200 Ватт |
| Ватtage | 3250 ватт |
| Муздатуу ыкмасы | Аба |
| Шайкеш түзмөктөр | Персоналдык компьютер |
| Туташтыргыч түрү | ATX |
| Энергия менен жабдуунун дизайны | Толук модулдук |
| Өндүрүүчү | QIO TECH |
9. Кепилдик жана колдоо
This product is covered under the manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the manufacturer directly.
Important Notice Regarding Returns:
ALL SALES ARE FINAL! If any returns are accepted, a 50% restocking fee will be charged. This policy is in place due to Bitcoin market volatility and potential misuse. Please purchase responsibly.
Кардарларды колдоо:
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your vendor or the manufacturer, QIO TECH. Ensure you have your product model number (S19 Pro 110Th/s) and purchase details ready when contacting support.
