1. Киришүү
The Lenox 8-In-1 Ratcheting Screwdriver is a versatile hand tool designed for various fastening applications. It features a multi-bit design with integrated storage and a ratcheting mechanism to enhance efficiency and reduce wrist strain during use. This manual provides detailed instructions to ensure proper and safe operation of your tool.
Image 1: The Lenox 8-In-1 Ratcheting Screwdriver, showcasing its compact design and blue and white handle.
2. Продукциянын өзгөчөлүктөрү
- 3-Way Ratcheting Mechanism: Allows for forward, reverse, and locked positions, enabling continuous turning without repositioning the wrist.
- In-Handle Bit Storage: Conveniently stores multiple double-ended bits within the screwdriver handle for quick access.
- Магниттик кеңеш: Securely holds bits and fasteners in place during operation.
- Integrated Nut Drivers: Shaft openings function as 1/4'', 5/16'', and 3/8'' nut drivers.
- Туруктуу курулуш: Designed for longevity and reliable performance.
3. Пакеттин мазмуну
Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:
- Lenox 8-In-1 Ratcheting Screwdriver Handle
- Double-ended bit (Slotted 8-10 / Phillips #2)
- Double-ended bit (Torx T25 / Square #2)
- Single-ended bit (Phillips #1)
4. Setup and Bit Installation
- Битти тандоо:
- The screwdriver comes with bits stored within the handle. To access them, pull the shaft out from the handle.
- The first double-ended bit (Slotted 8-10 / Phillips #2) is located at the end of the shaft.
- To find the second double-ended bit (Torx T25 / Square #2) and the single-ended Phillips #1 bit, remove the first double-ended bit and then pull out the inner sleeve from the shaft.
- Choose the appropriate bit for your task. If using a double-ended bit, ensure the desired tip is exposed.
- Битти киргизүү: Insert the chosen bit firmly into the magnetic tip of the screwdriver shaft. The magnetic tip will hold the bit securely.
- Reassembling the Screwdriver: Once the bit is installed, reinsert the shaft into the handle until it clicks into place.
Image 2: The screwdriver with a bit extended, ready for use. This view highlights the shaft and bit.
5. Иштөө нускамалары
- Adjusting the Ratchet: Locate the ratcheting selector switch on the screwdriver handle.
- Которуштургучту жылдырыңыз сол for clockwise (tightening) rotation.
- Которуштургучту жылдырыңыз туура for counter-clockwise (loosening) rotation.
- которгучту коюңуз борбор for a locked, non-ratcheting operation.
- Using the Screwdriver:
- Place the selected bit into the head of the fastener.
- Apply firm, steady pressure to the handle while turning. The ratcheting mechanism will allow the handle to turn freely in one direction while engaging the bit in the other, reducing the need to reposition your grip.
- Ensure the bit is fully seated in the fastener head to prevent stripping.
- Using as a Nut Driver:
- To use the integrated nut drivers, remove the bit from the shaft.
- The shaft itself has three different sized openings that function as 1/4'', 5/16'', and 3/8'' nut drivers.
- Select the appropriate opening and place it over the nut or bolt head.
- Turn the handle to tighten or loosen the fastener, utilizing the ratcheting function as needed.
Image 3: A user operating the screwdriver to fasten components, demonstrating its practical application.
6. Техникалык тейлөө
- Тазалоо: Wipe the screwdriver clean with a dry cloth after each use. Avoid using harsh chemicals or abrasive cleaners.
- Сактагыч: Store the screwdriver in a dry environment to prevent rust and corrosion. Ensure all bits are securely stored within the handle.
- Текшерүү: Periodically inspect the bits and the ratcheting mechanism for wear or damage. Replace worn bits as necessary.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Бекиткичтин башынын учтары тайып кетет же тилкелери кесилет. | Incorrect bit size, worn bit, insufficient pressure, or incorrect ratcheting direction. | Ensure correct bit size is used. Replace worn bits. Apply firm, consistent pressure. Verify ratcheting direction. |
| Ratcheting mechanism not engaging. | Selector switch in locked position or mechanism is dirty/damaged. | Check selector switch position. Clean mechanism if accessible. If damaged, contact support. |
| Bits not holding securely in shaft. | Magnetic tip is weak or bit is not fully inserted. | Ensure bit is fully inserted. If magnetic tip is weak, contact support. |
8. Техникалык шарттар
| Модель номери | LXHT60902 |
| Элемент Салмагы | 13 унция (болжол менен 368 грамм) |
| Продукциянын өлчөмдөрү | 11.91 x 1 x 1.38 дюйм (болжол менен 30.25 x 2.54 x 3.5 см) |
| Камтылган бит түрлөрү | Phillips (#1, #2), Slotted (8-10), Torx (T25), Square (#2) |
| Integrated Nut Driver Sizes | 1/4'', 5/16'', 3/8'' |
| Өзгөчөлүктөр | 3-Way Ratcheting, Magnetic Tip, In-Handle Storage |
| Материал | Blend (as per manufacturer) |
| Power Source | Hand-Powered |
9. Кепилдик маалыматы
The Lenox 8-In-1 Ratcheting Screwdriver Model LXHT60902 is backed by a Толук өмүр бою кепилдик. For details regarding warranty claims or service, please refer to the official Lenox webсайтка же кардарларды тейлөөгө кайрылыңыз.
10. Колдоо
For further assistance, technical support, or to inquire about replacement parts, please visit the official Lenox webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Байланыш маалыматы, адатта, продуктунун таңгагында же өндүрүүчүнүн дарегинде тапса болот webсайт.
Official Lenox Webсайт: www.lenoxtools.com
