Paulmann 94453 Capea LED сырткы дубал Lamp Motion Detector Instruction Manual менен

Introduction

Thank you for choosing the Paulmann 94453 Capea LED Outdoor Wall Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image: The Paulmann Capea LED Outdoor Wall Lamp, showing the product itself and its retail packaging. The lamp is black, with a conical shade and an integrated motion sensor at the base.

Маанилүү коопсуздук нускамалары

• Электр коопсуздугу: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always switch off the main power supply before installation, maintenance, or repair.
• Сыртта колдонуу: This product is designed for outdoor use (IP44 rated). Ensure all connections are properly sealed to prevent water ingress.
• Монтаждоо: Mount the fixture securely on a stable surface. Do not install on flammable surfaces.
• Жарык булагы: The LED light source is integrated and not replaceable by the user. Do not attempt to open or modify the light source compartment.
• Температура: л жаппагылаamp with insulating material. Ensure adequate air circulation around the fixture.

Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

• 1x Paulmann Capea LED Outdoor Wall Lamp (Модель 94453)
• Монтаждоо көрсөтмөлөрү
• Орнотуу жабдыктары (бурамалар, дубалга бекиткичтер) - (Assumed, as typical for wall lamps)

Техникалык мүнөздөмөлөр

Image: Technical drawing showing the dimensions of the Paulmann Capea LED Outdoor Wall Lamp: 153mm width, 165mm height, and 96mm depth.

Орнотуу боюнча колдонмо

Баштоодон мурун: Ensure the main power supply to the installation area is switched off at the circuit breaker. Use appropriate tools and safety equipment.

1. Монтаждоо ордун даярдоо: Choose a suitable wall location for the lamp, ensuring it is a stable surface and allows for proper wiring. Mark the drilling points for the mounting bracket.
2. Бургулоо тешиктери: Белгиленген жерлерге тешиктерди бургула жана тиешелүү дубал тыгындарын салгыла (зарыл болсо).
3. Кронштейн: Берилген бурамалар аркылуу монтаждык кронштейнди дубалга бекитиңиз.
4. Зымдар: Connect the electrical wires from your mains supply to the terminal block inside the lamp fixture. Ensure correct polarity (Live, Neutral, Earth) and secure all connections tightly. Refer to local electrical codes.
5. Тиркегиле Лamp: Lди кылдаттык менен бекитиңизamp fixture to the mounting bracket, ensuring no wires are pinched. Secure the lamp ордунда.
6. Күчтү калыбына келтирүү: Орнотуу аяктагандан кийин жана бардык туташуулар коопсуз болгондон кийин, негизги өчүргүчтөгү кубатту калыбына келтириңиз.

Image: The Paulmann Capea LED Outdoor Wall Lamp shown with its packaging, which illustrates basic installation steps and features like the motion sensor and IP44 rating.

Иштөө нускамалары

The Paulmann Capea LED Outdoor Wall Lamp features an integrated motion sensor for automatic operation.

Кыймыл сенсорунун жөндөөлөрү

The motion sensor can be adjusted to suit your specific needs. Typically, there are controls for:

• аныктоо бурчу: Approximately 90 degrees.
• аныктоо диапазону: 2-8 метр.
• Light Sensitivity (LUX): Determines the ambient light level at which the sensor activates the lamp.
  • ON < 20 Lux: лamp will turn on when motion is detected and the ambient light is below 20 Lux (dark conditions).
  • OFF > 20 Lux: лamp will remain off when the ambient light is above 20 Lux (daylight conditions).
• Убакыт: Sets the duration the light remains on after motion is detected. Adjustable from approximately 5 seconds to 5 minutes.

Adjust these settings using the small dials or switches located on the motion sensor unit, usually found at the bottom of the lamp. Use a small screwdriver if necessary.

Image: A diagram illustrating the motion sensor's detection angle (90 degrees), range (2-8 meters), and light sensitivity settings (On < 20 Lux / Off > 20 Lux), along with the adjustable time duration (5 seconds - 5 minutes).

Сүрөт: жакын план view of the integrated motion sensor located at the base of the Paulmann Capea LED Outdoor Wall Lamp, showing its spherical lens.

Техникалык тейлөө

• Тазалоо: Тазалоодон мурун электрди өчүрүңүз. lamp жумшак менен, гamp Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз, анткени алар каптоого же электрдик компоненттерге зыян келтириши мүмкүн.
• Жарык булагы: The LED light source is integrated and designed for long-term use (30,000 hours). It is not user-replaceable. If the LED fails, the entire fixture typically needs replacement.
• Текшерүү: Мезгил-мезгили менен текшерип туруу лamp for any signs of damage, loose connections, or wear. Address any issues promptly.

Проблемаларды чечүү

Кепилдик жана Кардарларды колдоо

Paulmann products are manufactured to high quality standards. This product comes with a 5-year guarantee, as indicated on the packaging. For warranty claims, technical assistance, or further inquiries, please contact your retailer or Paulmann customer support directly. Keep your proof of purchase for warranty purposes.

For more information, visit the official Paulmann webсайт: www.paulmann.com

Жок кылуу маалыматы

This product contains electronic components and an integrated LED light source. Do not dispose of it with general household waste. Please take it to a designated collection point for electrical and electronic equipment recycling in accordance with local regulations. Proper disposal helps prevent potential negative consequences for the environment and human health.