Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your Corally COR54011 TOROX 185A Brushless 2-6SS Speed Controller. Please read this manual thoroughly before using the product to ensure optimal performance and safety.
The Corally TOROX 185A ESC is designed for high-performance RC applications, offering robust power delivery and advanced programmability for various motor and battery configurations.
Продукт бүттүview
Image: The Corally COR54011 TOROX 185A Brushless Speed Controller, showcasing its red housing, integrated cooling fan, and robust gold-plated motor and battery connectors. The unit features a Team Corally logo on the side.
The TOROX 185A ESC is a powerful electronic speed controller featuring a durable red casing, an integrated cooling fan for thermal management, and multiple connection points for motor and battery. It supports both sensored and sensorless brushless motors (in sensorless mode) and is designed for 1/8th scale RC vehicles.
Коопсуздук чаралары
- Колдонулбай турган учурда батареяны ар дайым ESCден ажыратыңыз.
- Ensure proper polarity when connecting batteries to avoid damage.
- Ашыкча ысып кетүүнүн алдын алуу үчүн жакшы желдетилген жерде иштетиңиз.
- Keep away from water unless specifically designed for waterproof operation (this model has water protection).
- Do not attempt to disassemble or modify the ESC.
- Use appropriate motor and battery combinations as specified to prevent overload.
Орнотуу жана орнотуу
1. ESC орнотуу
Securely mount the ESC in your vehicle using double-sided tape or screws, ensuring good airflow around the unit for effective cooling. Avoid mounting near heat sources or in enclosed spaces.
2. Мотор байланышы
Connect the three motor wires from your brushless motor to the corresponding gold-plated terminals (A, B, C) on the ESC. Ensure a secure connection. For sensored motors, connect the sensor wire to the sensor port on the ESC and motor.
3. Батареяны туташтыруу
Connect your battery pack to the XT90 connector on the ESC. This ESC supports 2-6S LiPo or 9-18 Cell NiMH batteries. Always double-check polarity before connecting.
4. Receiver Connection
Plug the ESC's receiver cable into the throttle channel (usually Channel 2) of your RC receiver. The BEC (Battery Eliminator Circuit) provides power to the receiver and servos.
5. Калибрлөө
Before first use, calibrate the ESC with your radio transmitter. Refer to your transmitter's manual for specific calibration steps. Generally, this involves turning on the transmitter, holding full throttle, turning on the ESC, waiting for beeps, moving to full brake, waiting for beeps, and then returning to neutral.
Иштөө нускамалары
Күйгүзүү/өчүрүү
- To power on: Ensure the transmitter is on, then connect the battery to the ESC.
- To power off: Disconnect the battery from the ESC.
ESC программалоо
The TOROX 185A ESC is programmable. An optional Hobbywing LED programming card can be used for easier parameter adjustment. Key programmable parameters include:
- дроссель режими: Forward/Reverse (with programmable reverse lockout)
- Тормозду сүйрөө: 0-16% adjustment
- Батарея режими: NiMH/LiPo selection
- LiPo Cut-off Voltage: Programmable to protect LiPo batteries from over-discharge.
- Thermal Protection Temperature: 105°C же 125°Cге орнотулат.
- BEC Voltage: 6V же 7.4V.
Refer to the specific programming card manual for detailed instructions on how to change these settings.
Техникалык тейлөө
- Тазалоо: Regularly clean the ESC and cooling fan to remove dirt and debris. Use a soft brush or compressed air.
- Текшерүүлөр: Periodically inspect all wires and connectors for signs of wear, damage, or loose connections.
- Сактагыч: ESCти кургак, салкын жерде, күндүн түз тийген нурларынан жана өтө жогорку температурадан алыс сактаңыз.
- Сууну коргоо: While this ESC features water protection, it is not designed for prolonged submersion. Always dry the unit thoroughly after exposure to moisture.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| ESC күйбөйт. | Батарея туташкан эмес, батареянын деңгээли төмөнtagд, туура эмес байланыш. | Check battery connection, charge battery, inspect wires. |
| Мотор жооп бербей жатат. | Incorrect calibration, motor wires loose, receiver not connected. | Recalibrate ESC, check motor and receiver connections. |
| ESC ысып кетти. | Poor ventilation, motor/gear ratio too high, incorrect timing. | Improve airflow, adjust gear ratio, check motor timing. |
| Туруксуз операция. | Radio interference, loose connections, damaged sensor wire. | Check radio system, secure all connections, inspect sensor wire. |
Техникалык шарттар
| Параметр | Нарк |
|---|---|
| Модел | COR54011 (C-54011) |
| Макс. Үзгүлтүксүз ток | 185 А |
| Max. Burst Current | 950 А |
| Киргизүү көлөмүtage (LiPo) | 2-6S (11.1-22.2 V) |
| Киргизүү көлөмүtage (NiMH) | 9-18 Cell |
| Motor Limit (4S LiPo) | 3000 Kv (5892 size motor) |
| Motor Limit (6S LiPo) | 2400 Kv (5892 size motor) |
| BEC Voltage | 6V / 7.4V (Programmable) |
| BEC Current | 0-25 А. |
| Программалануучу | Yes (via optional Hobbywing LED card) |
| Термикалык коргоо | 105°C / 125°C (Programmable) |
| Сууну коргоо | Ооба |
| Муздатуу желдеткич | 30x30x10 мм |
| Мотор туташтыргычы | 6.5 mm female |
| Батарея туташтыргычы | XT90 туташтыргычы |
| Батарея зымынын өлчөмү | 10 AWG |
| Сунушталган колдонуу | 1/8th scale RC vehicles |
| Салмагы | Болжол менен 250 г (0.55 фунт) |
Кепилдик жана колдоо
For warranty information and technical support, please contact Corally customer service or visit their official webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
Эскертүү: Кепилдиктин конкреттүү шарттары аймакка жана сатуучуга жараша өзгөрүшү мүмкүн.
