1. Бүттүview
This manual provides detailed instructions for the LEXON LL128N Fingerprint Padlock. Please read this manual carefully before using the product to ensure proper operation and longevity. This biometric padlock offers secure, keyless access with advanced features for various applications.
2. Продукциянын өзгөчөлүктөрү
- Biometric Fingerprint Recognition: Securely unlock with your fingerprint. Supports up to 10 registered users.
- Туруктуу курулуш: Made from stainless steel and zinc alloy for enhanced security.
- Аба ырайына туруктуу: IP65 waterproof and dustproof rating, suitable for both indoor and outdoor use.
- Узак мөөнөттүү батарея: Up to 3000 unlocks on a single charge. Offers a standby time of up to 12 months.
- USB-C заряддоо: Conveniently rechargeable via a Type-C USB cable (included). Full charge in approximately 1.5 hours.
- Elegant дизайн: Designed by Guillaume Delvigne, available in multiple colors.
Image: The LEXON Nomaday Lock showcasing its design and available colors.
3. Пакеттин мазмуну
- LEXON LL128N Fingerprint Padlock
- USB-C заряддоо кабели
- User Manual
4. Орнотуу
4.1 Initial Fingerprint Registration (Administrator)
Upon first use, the padlock is in default status, meaning any fingerprint can unlock it. You must register the first two fingerprints as administrators. These first two fingerprints are crucial for managing additional users and resetting the device.
- Press and hold your finger on the fingerprint sensor until the көк жарык illuminates. Release your finger.
- The жашыл жарык will illuminate. Place your finger on the sensor repeatedly from various angles until the green light turns off. This completes the registration of the first administrator fingerprint.
- Ал эми жашыл жарык is still illuminated, use a different finger and repeat step 2. This registers the second administrator fingerprint.
After completing these 3 steps, the first two fingerprints are successfully set as administrators. The padlock will now only unlock with these registered fingerprints.
Video: Demonstrates the process of setting up administrator fingerprints on the padlock.
4.2 Registering Additional Fingerprints (Users 3-10)
To add more user fingerprints (up to a total of 10), an administrator fingerprint is required.
- баскычын басып кармап туруңуз администратор манжа on the sensor until the көк жарык illuminates. Release the finger.
- The жашыл жарык will illuminate. Have the new user place their finger on the sensor repeatedly from various angles until the green light turns off. This registers the new user's fingerprint.
Repeat these steps for each additional user, up to a maximum of 10 fingerprints in total.
4.3 Deleting All Fingerprints (Factory Reset)
To delete all registered fingerprints and restore the padlock to its factory default state (any fingerprint can unlock), follow these steps:
- орун а администратор манжа on the sensor and hold it. The көк жарык will illuminate, then turn кызыл. Continue holding.
- After the red light illuminates, the жашыл жарык will flash once. Release your finger immediately after the green light flashes.
All fingerprints are now deleted, and the lock is reset to its default state. Any fingerprint can now unlock the device until new administrator fingerprints are registered.
5. Иштөө нускамалары
5.1 Unlocking the Padlock
To unlock the padlock, simply place a registered finger on the fingerprint sensor. The padlock will unlock within 0.5 seconds if the fingerprint is recognized.
Image: A hand demonstrating the unlocking process by placing a finger on the sensor.
Video: Shows the quick unlocking action of the fingerprint padlock.
5.2 Locking the Padlock
To lock the padlock, simply push the shackle down until it clicks into place. The padlock will automatically lock.
6. Кулпуну кубаттоо
The LEXON LL128N Padlock is equipped with a rechargeable Lithium-ion battery. When the battery is low, the indicator light will flash red. To charge:
- Locate the USB-C charging port, usually covered by a protective cap.
- Connect the provided USB-C cable to the padlock and to a standard USB power source (e.g., computer, wall adapter).
- Индикатордун жарыгы заряддоонун абалын көрсөтөт (мисалы, кызыл заряддоо үчүн, жашыл толук заряддалганын көрсөтөт).
A full charge takes approximately 1.5 hours and provides power for up to 3000 unlocks or 12 months of standby time.
7. Техникалык тейлөө
- Тазалоо: Wipe the padlock with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Манжа сенсор: Оптималдуу иштеши үчүн манжа изинин сенсорун таза жана кургак кармаңыз.
- Заряддоо порту: Ensure the USB-C charging port is free from dust and debris. Keep the protective cap closed when not charging.
- Сактагыч: Store the padlock in a cool, dry place when not in use for extended periods.
Image: The padlock demonstrating its IP65 waterproof capabilities, suitable for various environments.
8. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Padlock does not unlock with registered fingerprint. |
|
|
| Cannot register new fingerprints. |
|
|
| Padlock does not charge. |
|
|
9. Техникалык шарттар
| Бренд | ЛЕКСОН |
| Модель номери | LL128N |
| Кулпу түрү | Biometric Fingerprint Padlock |
| Материал | Stainless Steel / Zinc Alloy |
| Өлчөмдөрү (L x W x Y) | 1.4 x 3.18 x 7.59 см |
| Салмагы | 81.6 г |
| Суу өткөрбөйт/чаң өткөрбөйт | IP65 |
| Макс манжа издери | 10 |
| Батарея түрү | Литий-ион |
| Заряддоо порту | USB-C |
| Заряддоо убактысы | Болжол менен 1.5 саат |
| Unlocks per Charge | 3000ге чейин |
| Күтүү убактысы | 12 айга чейин |
Image: A visual representation of the product's technical specifications.
10. Кепилдик жана колдоо
The LEXON LL128N Fingerprint Padlock comes with a 1 жылдык өндүрүүчүнүн кепилдиги сатып алынган күндөн тартып. Бул кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт.
For warranty claims or technical support, please contact your retailer or visit the official LEXON webкардарларды тейлөө маалымат сайты.
