1. Киришүү
This manual provides detailed instructions for the safe and effective use of the VCELINK GJ671BL RJ45 Crimp Tool. This multi-functional tool is designed for crimping various modular plugs, including RJ45 (8P8C) for Cat5, Cat5e, Cat6, Cat6a, Cat7 pass-through connectors, and RJ11/RJ12 (6P6C/6P4C) telephone plugs. Its pass-through design facilitates accurate wire sequencing and trimming during the crimping process.
2. Коопсуздук маалыматы
Please read and understand all safety instructions before operating the tool. Failure to follow these instructions may result in injury or damage to the tool.
- Абайлаңыз: This tool has moving parts that can pinch. Keep hands and fingers clear of the crimping mechanism during operation.
- Эскертүү: Always wear approved eye protection when using this tool to prevent eye injury from flying debris.
- Do not use the tool for purposes other than its intended use.
- Keep the tool clean and dry. Store it in a secure location away from children.
- Ар бир колдонуудан мурун куралдын кандайдыр бир бузулууларын текшерип туруңуз. Бузулган куралды колдонбоңуз.
3. Продукт бүтүп калдыview
The VCELINK GJ671BL crimp tool features a robust design for reliable performance. Familiarize yourself with its components:
Image: VCELINK GJ671BL RJ45 Crimp Tool showing its main components including handles, crimping dies, and lock mechanism.
- туткалары: Ergonomically designed for comfortable grip and leverage.
- Crimping өлүктөр: Dedicated slots for 8P (RJ45) and 6P (RJ11/RJ12) connectors.
- Pass-Through Blade: Integrated blade for trimming excess wires on pass-through connectors.
- Кулпу механизми: Secures the tool in a closed position for storage.
- Dovetail Clip Crimper: Specific slot for crimping the metal dovetail buckle on shielded connectors.
3.1 Колдонуучулук
This tool is compatible with both pass-through and non-pass-through RJ45/RJ12 connectors.
Image: Illustrates the tool's compatibility with various RJ45 and RJ12 connector types, including pass-through and standard designs.
4. Орнотуу
Before using the crimp tool, ensure it is unlocked and the correct crimping mode is selected.
4.1 Unlocking the Tool
The tool features a lock mechanism for safe storage. To unlock:
- Press down on the handles.
- Roll out the lock button to release the handles.
Image: Demonstrates the process of unlocking the crimp tool by pressing the handles and rolling out the lock button.
4.2 Changing Crimping Mode (for RJ45)
The tool supports different crimping modes for Cat6 and Cat7 RJ45 connectors. Use a screwdriver to adjust the mode:
- CAT7 Mode: For RJ45 8P8C fully enclosed plugs.
- CAT6 Mode: For RJ45 8P8C plugs with a strain latch or opening.
Image: Shows the crimp tool set to CAT7 mode, suitable for fully enclosed RJ45 8P8C plugs.
Image: Shows the crimp tool set to CAT6 mode, suitable for RJ45 8P8C plugs with a strain latch or opening.
5. Иштөө нускамалары
Follow these steps to crimp an RJ45 pass-through connector:
Image: A visual guide detailing the eight steps for crimping an RJ45 connector using the VCELINK GJ671BL tool.
- Кабелди даярдоо: Cut and strip the outer jacket of the Ethernet cable (approximately 3 cm or 1.18 inches). Note: This crimper does not include stripping or cutting blades for the cable jacket. A separate cable stripper is required.
- Зымдарды уюштуруу: Untwist and straighten the individual wires. Arrange them according to the T568A or T568B wiring standard.
- Кесүүчү зымдар: Cut the wires at an oblique angle to facilitate insertion into the connector.
- Зымдарды киргизүү: Carefully thread the arranged wires into the RJ45 pass-through connector, ensuring each wire passes through to the front.
- Select Crimping Mode: If not already done, adjust the crimping mode (Cat6 or Cat7) using a screwdriver as described in Section 4.2.
- Crimp Modular Plug: Insert the connector with the wires fully pushed to the bottom of the crimping port into the appropriate 8P slot on the tool. Squeeze the handles firmly to crimp the connector. The integrated blade will simultaneously trim the excess wires protruding from the front of the pass-through connector.
- Crimp Dovetail Clip (for Shielded Connectors): If using a shielded connector with a metal dovetail buckle, insert the crimped connector into the 'CRIMP METAL CLIP' slot and squeeze the handles to secure the buckle. This enhances signal stability.
- Текшерүү: Verify that the crimp is secure and all wires are properly seated and trimmed.
Image: Comparison showing an RJ45 pass-through connector before and after crimping, highlighting the clean cut of excess wires.
Image: Demonstrates how to crimp the metal dovetail clip on a shielded RJ45 connector using the dedicated slot on the tool.
6. Техникалык тейлөө
Proper maintenance ensures the longevity and performance of your VCELINK GJ671BL crimp tool.
- Тазалоо: After each use, remove any wire debris from the crimping dies and cutting blade. Use a small brush or compressed air if necessary.
- Майлоо: Жылмакай иштешин камсыз кылуу үчүн, мезгил-мезгили менен айланма чекиттерге жана кыймылдуу бөлүктөргө жеңил машина майын сүйкөп туруңуз.
- Сактагыч: Always engage the lock mechanism to keep the tool closed when not in use. Store in a dry environment to prevent rust.
- Бычак текшерүү: While the tool is designed for durability, regularly inspect the cutting blade for sharpness. A dull blade can lead to incomplete cuts.
7. Кыйынчылыктарды
If you encounter issues while using the crimp tool, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Wires not trimming cleanly or completely. | Wires not pushed far enough into the connector; dull cutting blade; incorrect connector type. | Ensure wires are fully extended through the pass-through connector. Inspect and clean the cutting blade. Ensure you are using pass-through connectors designed for this tool. |
| Connector not crimping securely. | Insufficient pressure applied; incorrect crimping mode selected; worn crimping dies. | Apply firm and even pressure during crimping. Verify the correct Cat6/Cat7 mode is selected. If dies appear worn, contact support. |
| Tool feels stiff or difficult to operate. | Майлоонун жетишсиздиги; механизмде калдыктар. | Clean the tool and apply a light machine oil to pivot points. |
| Metal dovetail clip not securing properly. | Connector not fully seated in the dovetail crimping slot. | Ensure the shielded connector is correctly positioned in the 'CRIMP METAL CLIP' slot before squeezing. |
8. Техникалык шарттар
Key technical details for the VCELINK GJ671BL Crimp Tool:
Image: Displays the physical dimensions of the VCELINK GJ671BL crimp tool in millimeters and inches.
- Модел: GJ671BL
- Бөлүмдүн номери: GJ671BL-1P-UK
- Продукциянын өлчөмдөрү: 13.5 x 2.6 x 6 см (5.31 x 1.02 x 2.36 дюйм)
- Элемент Салмагы: 312.6 г (0.69 фунт)
- Түсү: Кара/Көк
- Стиль: Pass-through type
- Материал: Carbon steel, polypropylene (handles)
- Шайкештик: 8P8C RJ45 (Cat5, Cat5e, Cat6, Cat6a, Cat7 Pass-Through), 6P6C/6P4C RJ11/RJ12
- Батареялар талап кылынат: Жок
9. Кепилдик жана колдоо
VCELINK is committed to providing high-quality products and customer satisfaction.
- Кепилдик: This product comes with an 18-month warranty for quality-related issues.
- Кардарларды тейлөө: VCELINK offers lifetime customer service for any quality problems or product-related inquiries.
- Байланыш: For support, please refer to the contact information provided with your purchase or visit the official VCELINK webсайт.
