1. Киришүү
This manual provides detailed instructions for the installation, operation, and maintenance of your KES XB6240-BK Tub and Shower Faucet System. This system features a 10-inch rain shower head and a waterfall tub faucet, designed for wall-mount installation. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Коопсуздук маалыматы
Observe all local plumbing and building codes. Professional installation is recommended. Ensure water supply is turned off before beginning installation. Wear appropriate personal protective equipment (PPE) during installation. This product is designed for residential use. Do not modify the product as this may void the warranty and create safety hazards.
Warning: To prevent scalding, ensure the pressure-balanced valve is correctly installed and calibrated according to instructions. Test water temperature before use.
3. Камтылган компоненттер
Verify that all parts are present before beginning installation. If any parts are missing or damaged, contact KES customer support for replacements.
Figure 3.1: Parts List for KES XB6240-BK Shower System.
- Showerhead (10", SUS304 Stainless Steel)
- Diverter Knob & Handle
- Cover Plate
- Pressure Balance Valve (Brass, Anti-Scalding)
- Waterfall Tub Faucet
- Shower Arm & Escutcheon
- Колкаптар
- Орнотуу боюнча колдонмо (бул документ)
- Other Accessories (mounting hardware, seals, etc.)
4. Орнотуу жана орнотуу
Installation should be performed by a qualified professional. Refer to the provided diagram for recommended dimensions and rough-in specifications.
Figure 4.1: Product Dimensions and U.S. Standard Connections.
4.1 Орнотууга чейинки кадамдар
- Дааратканага алып баруучу негизги суу түтүгүн өчүрүңүз.
- Clear the installation area and ensure you have all necessary tools.
- Review local plumbing codes and ensure compliance.
4.2 Valve Installation
- Install the pressure balance valve (4) into the wall according to the rough-in dimensions shown in Figure 4.1.
- Connect the hot and cold water lines to the appropriate inlets on the valve.
- Connect the outlet lines to the shower arm and tub spout locations.
- Бардык туташуулардын коопсуз жана суу өткөрбөгөндүгүн текшериңиз.
- The valve is designed to prevent scalding by balancing hot and cold water pressure.
4.3 Shower Head and Arm Installation
- Install the shower arm (6) into the wall outlet, ensuring it is securely fastened.
- Attach the 10-inch showerhead (1) to the shower arm. Hand-tighten, then use a wrench for a final quarter turn, being careful not to overtighten.
- The showerhead features self-cleaning nozzles and a 360° rotation for adjustable angle.
4.4 Tub Spout Installation
- Install the waterfall tub faucet (5) onto the wall outlet.
- Ensure the tub spout is level and securely attached to prevent leaks.
4.5 Акыркы кадамдар
- Install the cover plate (3) and the diverter knob and handle (2) onto the valve.
- Turn on the main water supply and check for any leaks.
- Test the functionality of both the shower head and tub spout.
5. Иштөө нускамалары
Your KES shower system is designed for ease of use and offers simultaneous operation of the shower head and tub spout.
Video 5.1: Demonstration of KES Tub and Shower Faucet Set operation, showing how to switch between the waterfall tub spout and the rain shower head, and adjust water temperature.
5.1 Суу агымын көзөмөлдөө
- The upper knob on the valve trim controls the water flow to either the shower head or the tub spout.
- Rotate the knob to select your desired water outlet.
- The system allows for both the shower head and tub spout to run simultaneously.
5.2 Температураны жөндөө
- The lower handle on the valve trim controls the water temperature.
- Move the handle to adjust the mix of hot and cold water.
- The pressure-balanced valve maintains a consistent water temperature, preventing sudden changes due to pressure fluctuations elsewhere in the plumbing system.
Figure 5.2: Pressure-balanced valve with anti-scald cartridge.
6. Техникалык тейлөө
6.1 Тазалоо
- Clean the faucet and shower head regularly with a soft cloth and mild soap or a non-abrasive cleaner.
- Абразивдүү тазалоочу каражаттарды, катуу химиялык заттарды же кыргыч губкаларды колдонуудан алыс болуңуз, анткени алар күңгүрт кара түстөгү бетке зыян келтириши мүмкүн.
- The shower head features self-cleaning silicone nozzles. Gently rub the nozzles to dislodge any mineral buildup.
Figure 6.1: Shower head with self-cleaning nozzles.
6.2 Long-Term Care
- Бардык туташуулардын бекемдигин жана эскирүү белгилерин мезгил-мезгили менен текшерип туруңуз.
- If you experience reduced water flow, check the shower head nozzles for mineral buildup and clean as described above.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Төмөн суу басымы | Clogged shower head nozzles or mineral buildup. | Clean the silicone nozzles on the shower head by gently rubbing them. Check water supply valves for full opening. |
| Суунун температурасынын өзгөрүшү | Pressure balance valve not functioning correctly or external plumbing issues. | Ensure the pressure balance valve is correctly installed. If issues persist, consult a professional plumber. |
| Байланыштардан агып кетүүлөр | Бошоң байланыштар же бузулган пломбалар. | Turn off water supply. Tighten connections. Replace any worn or damaged seals. |
| Pipe Noise (Water Hammer) | Air in pipes or high water pressure. | The KES valve is designed to minimize pipe noise. If noise occurs, consult a plumber to check for air in the system or excessive water pressure. |
8. Техникалык шарттар
- Модель номери: XB6240-BK
- Бренд: KES
- Түсү: Matte Black
- Материал: Stainless Steel (SUS304 for shower head), Brass (Rough-in Valve)
- Бүткөн түрү: Кара
- туткалардын саны: 2
- Монтаж түрү: Дубалга орнотуу
- Душ башынын өлчөмү: 10 дюйм
- Агым ылдамдыгы: 1.8 GPM (Gallons Per Minute), 6.8 L/min at 80 PSI
- Максималдуу басым: 5.5 Бар
- Продукциянын өлчөмдөрү: 15.8 x 13.4 x 6.7 дюйм
- Элемент Салмагы: 9.1 фунт
- Орнотуу ыкмасы: Дубалга орнотулган
- Камтылган компоненттер: 10" Shower Head, Rough-in Valve with Trim, Shower Arm, Waterfall Style Tub Spout, Other Accessories
9. Кепилдик жана колдоо
9.1 Кепилдик маалыматы
This KES product is covered by a Өмүр бою чектелген кепилдик. Please refer to the official KES website or contact customer support for full details regarding warranty terms and conditions.
9.2 Кардарларды колдоо
For any questions, technical assistance, or replacement parts, please contact KES customer support. Our team is available 24/7 to assist you.
- Алмаштыруучу бөлүктөрү: Free replacement parts are available upon request if any parts are damaged or missing.
- 1-on-1 Exclusive Service: Professional support is available to follow up on individual cases efficiently.
Көбүрөөк маалымат алуу үчүн, киргиле KES Store on Amazon.
