Introduction
The PowerWalker VFI AT series is an online Uninterruptible Power Supply (UPS) system designed to provide reliable power protection for critical electronic devices. This manual provides essential information for the safe and efficient operation of your PowerWalker VFI 3000 AT UPS, model 10122182.
Маанилүү коопсуздук нускамалары
Please read and follow all instructions carefully before installing, operating, or servicing the UPS. Keep this manual for future reference.
- Бул UPS коркунучтуу том камтыйтtages. Түзмөктү бөлүктөргө бөлүүгө аракет кылбаңыз. Тейлөөнү квалификациялуу кызматкерлер гана аткарышы керек.
- UPS жерге туташтырылган AC розеткасына туташтырылышы керек.
- Желдетүүчү тешиктерди жаппаңыз. UPSтин айланасында жетиштүү аба айланышын камсыз кылыңыз.
- Do not install the UPS in direct sunlight, near heat sources, or in environments with excessive dust, humidity, or corrosive substances.
- The internal batteries are not user-replaceable. Contact qualified service personnel for battery replacement.
- In case of fire, use a dry chemical fire extinguisher. Water can be dangerous.
Пакеттин мазмуну
Verify that all items listed below are included in your package. If any items are missing or damaged, contact your dealer.
- PowerWalker VFI 3000 AT UPS Unit
- Колдонуучунун Колдонмосу (бул документ)
- USB байланыш кабели
- Power Input Cable
- Программалык камсыздоонун CDси (эгер бар болсо)
Продукт бүттүview
Front Panel
1-сүрөт: Фронт view of the PowerWalker VFI 3000 AT UPS. This image displays the main chassis, ventilation grilles, and the front control panel with its LCD screen and buttons.
2-сүрөт: Деталдаштырылган view of the UPS front panel. The LCD screen shows input/output voltage and load status. Below the screen are control buttons: ON, OFF, ENTER, and ESC, used for navigating menus and controlling the unit.
The front panel features an LCD display that provides real-time information about the UPS status, including input/output voltage, battery level, and load capacity. Control buttons allow for navigation through the display menus and basic operation of the unit.
Арткы панель
3-сүрөт: Арткы view of the PowerWalker VFI 3000 AT UPS. This panel includes multiple Type F earthing contact outlets for connecting protected devices, cooling fans, a main power input, and communication ports (USB, RS-232, and an optional slot for network card).
The rear panel provides the necessary connections for input power, output to protected devices, and communication interfaces. It includes four Type F earthing contact outlets, a terminal output, USB and RS-232 communication ports, and slots for optional accessories like network cards.
Орнотуу нускамалары
1. Жайгаштыруу
- UPSти тегиз, туруктуу бетке коюңуз.
- Ensure the environment is well-ventilated and free from excessive dust or moisture.
- Maintain at least 20 cm (8 inches) of clearance from the rear and sides of the UPS for proper airflow.
- Avoid placing the UPS near heat-emitting appliances.
2. Кубатка туташуу
- Connect the provided power input cable to the UPS input receptacle on the rear panel.
- Plug the other end of the power input cable into a grounded wall outlet.
- Батареянын оптималдуу иштешин камсыз кылуу үчүн, UPSти биринчи жолу колдонуудан мурун кеминде 8 саат кубаттаңыз.
3. Түзмөктөрдү туташтыруу
- Plug your critical devices (e.g., computers, servers, network equipment) into the Type F output receptacles on the rear panel of the UPS.
- Ensure that the total load connected to the UPS does not exceed its rated capacity (2700W for this model).
- For devices requiring terminal output, connect them according to electrical safety standards.
4. Баштапкы ишке киргизүү
- After connecting the UPS to AC power and allowing initial charging, press and hold the ON button on the front panel for approximately 2 seconds.
- The UPS will perform a self-test, and the LCD display will illuminate, indicating operational status.
- The UPS is now providing protected power to the connected devices.
UPSти иштетүү
Күйгүзүү/өчүрүү
- Күйгүзүү: басып, кармап туруңуз ON баскычын 2 секунда басыңыз.
- Өчүрүү: басып, кармап туруңуз ӨЧҮРҮҮ button for 2 seconds. The UPS will shut down, and power to connected devices will cease.
LCD дисплейди түшүнүү
The LCD display provides critical information about the UPS status. Use the ENTER жана ESC buttons to navigate through different display screens, which may include:
- Киргизүү көлөмүtage жана Frequency
- Output Voltage жана Frequency
- Батарея зарядынын деңгээли
- Load Percentage
- Operating Mode (Online, Battery, Bypass)
- Error Codes (if any)
Батареянын резервдик көчүрмөсү
Куч болгон учурда уtage же олуттуу томtage fluctuation, the UPS will automatically switch to battery power to provide continuous power to connected devices. An audible alarm may sound, and the LCD will indicate "Battery Mode." The duration of battery backup depends on the load connected and the battery charge level.
Байланыш программасы
For advanced monitoring and management, install the provided communication software on a computer connected to the UPS via the USB or RS-232 port. This software allows for scheduled shutdowns, remote monitoring, and detailed event logging.
Техникалык тейлөө
Батареяга кам көрүү
- Ensure the UPS is connected to AC power at all times to keep the batteries fully charged.
- Perform a battery self-test periodically (e.g., once every 3 months) using the UPS front panel controls or communication software to verify battery health.
- Batteries have a limited lifespan. If the battery backup time significantly decreases, contact qualified service personnel for replacement.
Тазалоо
- Тазалоодон мурун UPSти AC кубатынан жана бардык туташкан түзмөктөрдөн ажыратыңыз.
- UPSтин сыртын сүртүү үчүн жумшак, кургак чүпүрөктү колдонуңуз.
- Суюк же аэрозоль тазалагычтарды колдонбоңуз, анткени алар түзмөккө зыян келтириши мүмкүн.
- Periodically clean the ventilation grilles to prevent dust buildup, which can impede airflow and cause overheating.
Сактагыч
- If storing the UPS for an extended period, ensure the batteries are fully charged.
- Store the UPS in a cool, dry place.
- Recharge the batteries every 3 months during storage to prevent deep discharge and prolong battery life.
Проблемаларды чечүү
Refer to the table below for common issues and their solutions. If the problem persists, contact technical support.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| UPS күйбөйт. | AC киргизүү күчү жок. Батарея заряды аз. | Электр шнурунун туташуусун жана дубал розеткасын текшериңиз. Allow UPS to charge for several hours. |
| UPS кадимки режимде тынымсыз сигнал берет. | Ашыкча жүктөө абалы. Ички күнөө. | Reduce the load by unplugging non-essential devices. Техникалык колдоо кызматына кайрылыңыз. |
| Кыска камдык убакыт. | Батареялар толук заряддалган эмес. Batteries reaching end of life. Ашыкча жүк. | Allow UPS to charge for 8+ hours. Contact service for battery replacement. Байланыштагы жүктөмдү азайтыңыз. |
| UPS is noisy. | Normal fan operation (especially under load). желдеткич тоскоолдук. | This is normal for online UPS units. Ensure proper ventilation. Check for and clear any obstructions around fans. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | 10122182 |
| Кубаттуулугу | 3000 VA / 2700 Вт |
| Киргизүү көлөмүtage | 300 Volts (nominal) |
| Output Voltage | 300 Volts (nominal) |
| Батарея түрү | Коргошун-кислота, AGM |
| Батареялар камтылган | Ооба |
| Output Outlets | 4x Type F Earthing Contact, Terminal Output |
| Форма фактору | Tower |
| Өлчөмдөрү (L x W x Y) | 41.6 x 19.6 x 34.2 см |
| Салмагы | 21 кг |
| Материал | Пластик |
| Ampөчүрүү | 9 Amps |
Кепилдик жана колдоо
The PowerWalker VFI 3000 AT UPS is covered by a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official PowerWalker webсайт.
For technical support, service inquiries, or to report any issues, please contact your local dealer or PowerWalker customer service. Have your model number (10122182) and purchase information ready when contacting support.
