SUNLU S8 Plus 3D Printer User Manual

1. Киришүү

The SUNLU S8 Plus is an FDM (Fused Deposition Modeling) 3D printer designed for both beginners and experienced users, offering a large build volume of 310x310x400mm. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your printer to ensure optimal performance and longevity.

Figure 1: ашыкview of the SUNLU S8 Plus 3D Printer.

2. Орнотуу жана чогултуу

The SUNLU S8 Plus 3D Printer comes 95% pre-assembled, allowing for quick and straightforward setup. Follow these steps to get your printer ready for its first print.

2.1 Тез орнотуу

The printer is designed for fast assembly, requiring only a few simple steps. This design also facilitates easy disassembly for upgrades or maintenance, supporting DIY enthusiasts.

Figure 2: Simplified installation guide highlighting the main assembly points.

1. Insert the square-shaped nuts into the slots on each side of the gantry frame.
2. Screw M5*8 bolts through the T-shaped fixing block with the squared nuts of each side of the gantry frame.
3. Install 4 pieces of M5*25 bolts connecting the base frame and gantry frame.
4. Secure the top frame with M5*12 screws.
5. Attach the filament holder with M5*16 screws.
6. Fasten any remaining components with M5*6 screws as indicated in the manual.

3. Негизги өзгөчөлүктөрү

3.1 Large Build Volume

The SUNLU S8 Plus boasts a generous printing size of 310x310x400mm. This large volume eliminates the need to print large items in multiple parts, saving time and expanding possibilities for your 3D printing projects.

Figure 3: The substantial build dimensions of the S8 Plus printer.

3.2 Резюме басып чыгаруу функциясы

The printer features a resume printing function, allowing you to pause prints at any time and continue after adjusting filament or in case of an accidental power outage. This prevents print failures and material waste.

Figure 4: Visual representation of the resume printing and filament detection capabilities.

3.3 Double-sided Movable Plate

The SUNLU S8 Plus is equipped with a versatile double-sided glass bed. One side offers a smooth glass surface, while the other has a frosted glass surface, providing users with options for optimal print adhesion and finish.

Figure 5: The double-sided carborundum glass bed for easy model removal and improved adhesion.

3.4 Upgraded Components

Compared to the previous S8 version, the S8 Plus features several improvements, including an upgraded Extruder Spring, Swing-Arm, Filament Hanging Holder, and Carborundum Glass Bed, enhancing overall performance and user experience.

4. Иштөө нускамалары

4.1 Күйгүзүү/өчүрүү

To power on the printer, ensure all connections are secure and plug the power cord into a grounded outlet. Use the power switch located on the side of the machine to turn it on or off.

4.2 Жүктөө Filament

Place the filament spool onto the filament hanging holder. Gently feed the filament through the filament detection sensor and into the extruder. Heat the nozzle to the appropriate temperature for your filament type (e.g., 200-220°C for PLA) and push the filament until it extrudes smoothly from the nozzle.

4.3 Басып чыгарууну баштоо

Prepare your 3D model using a slicing software (e.g., Cura) and save it to a TF card. Insert the TF card into the printer's card slot. Navigate the printer's menu to select your desired file and initiate the print. Ensure the print bed is properly leveled before starting.

4.4 Басып чыгарууларды көзөмөлдөө жана тындыруу

Monitor the printing process to ensure proper adhesion and layer deposition. If necessary, you can pause the print via the printer's control panel. This is useful for filament changes or inspecting the print progress.

5. Техникалык тейлөө

Regular maintenance ensures the longevity and consistent performance of your SUNLU S8 Plus 3D Printer.

• Басма керебетти тазалоо: After each print, allow the print bed to cool and carefully remove the printed object. Clean the surface with isopropyl alcohol to remove any residue and ensure good adhesion for future prints.
• Соплолорду тазалоо: Periodically check the nozzle for clogs. You can use a thin needle or a cold pull method to clear any obstructions.
• Кыймылдуу бөлүктөрүн майлоо: Apply a small amount of lubricant to the Z-axis lead screws and smooth rods every few months to ensure smooth movement.
• Курларды жана шкивтерди текшерүү: Ensure that the X and Y axis belts are properly tensioned and that the pulleys are free of debris.
• Программалык камсыздоонун жаңыртуулары: Check the official SUNLU website for any available firmware updates to improve printer functionality and performance.

6. Кыйынчылыктарды

This section addresses common issues you might encounter. For more detailed troubleshooting or persistent problems, please contact customer support.

6.1 Басып чыгаруудагы кеңири таралган көйгөйлөр

• Төшөктүн начар адгезияланышы:
  • Ensure the print bed is clean and free of grease or dust.
  • Verify proper bed leveling. The nozzle should be at an optimal distance from the bed (e.g., paper thickness).
  • Adjust bed temperature and first layer print speed in your slicing software.
• Filament Extruding эмес:
  • Check if the nozzle is clogged. Perform a cold pull or use a cleaning needle.
  • Жиптин туура жүктөлгөнүн жана чаташып калбаганын текшериңиз.
  • Verify the extruder gear is gripping the filament and not slipping.
• Катмарды которуу:
  • Check the tension of the X and Y axis belts. They should be taut but not overly tight.
  • Принтердин титирөөсүн алдын алуу үчүн анын туруктуу бетте турганын текшериңиз.
  • Reduce print speed, especially for complex geometries.

7. Техникалык шарттар

8. Кепилдик жана колдоо

For any issues or inquiries regarding your SUNLU S8 Plus 3D Printer, please contact the seller directly. They are committed to resolving your problems as quickly as possible.

Юридикалык баш тартуу:

"If you have any problems with the printer, please contact the seller to solve it, and we will solve your problem as soon as possible."

Кошумча ресурстар жана продукт жөнүндө маалымат алуу үчүн расмий веб-сайтка кириңиз SUNLU Store on Amazon.