Antec NX410 ATX Mid-Tower Case User Manual

1. Продукт бүтүп калдыview

The Antec NX410 is an ATX mid-tower case designed for PC enthusiasts and builders. It features a tempered glass side panel for full interior visibility and comes equipped with pre-installed ARGB fans for efficient cooling and aesthetic appeal. This manual provides detailed instructions for assembly, operation, and maintenance.

Image: Antec NX410 ATX Mid-Tower Case in white, showcasing its tempered glass side panel and vibrant ARGB fans.

Негизги өзгөчөлүктөрү:

• 3 ARGB Fans Included: Two 140mm ARGB fans are pre-installed in the front, and one 120mm ARGB fan is in the rear.
• Температуралуу айнек каптал панели: A tempered glass side panel offers a clear view ички компоненттериңиздин жана RGB жарыктандыруусунун.
• High Efficiency Cooling Design: The pre-installed 140mm ARGB front fans promote effective air convection for optimal cooling.
• Grid Front Panel Design: А сtaggered grid design on the front panel enhances aesthetics while maintaining heat dissipation.
• Motherboard колдоо: Compatible with ATX, Micro-ATX, and ITX motherboard form factors.

2. Орнотуу жана орнотуу

2.1 Каптал панелдерди алып салуу

The tempered glass side panel is designed for easy access. It is secured with thumb screws and can be removed by lifting it off its hinges after opening. The opposite side panel is a solid metal panel, also secured with thumb screws.

Image: Antec NX410 case with the tempered glass side panel removed, showing the interior.

Image: Diagram illustrating the steps to remove the magnetic and removable tempered glass side panel. First, open the side panel, then lift it off.

Абайлаңыз: The tempered glass is fragile. Handle with care. To remove the side glass panel, lay it flat before removing it.

2.2 Энелик платаны жана компоненттерди орнотуу

The NX410 supports ATX, Micro-ATX, and ITX motherboards. Ensure your motherboard fits within the case dimensions of 390mm x 210mm x 485mm.

• CPU муздаткычтын максималдуу бийиктиги: 168 мм
• Максималдуу GPU узундугу: 335 мм
• Максималдуу PSU узундугу: 165 мм

Image: Internal layout of the Antec NX410 case, highlighting maximum clearances for CPU cooler (168mm), GPU (335mm), and motherboard support (up to ATX).

2.3 Drive Bays

Иш төмөнкүлөрдү камсыз кылат ample storage options:

• 3.5" HDD / 2.5" SSD (Convertible): 2/1 slots
• 2.5 дюймдук SSD: 3 слот

Сүрөт: Арткы салон view of the Antec NX410 case, indicating locations for SSDs, HDDs, and PSU.

2.4 Fan Installation and Support

The case comes with 3 ARGB fans pre-installed: two 140mm in the front and one 120mm in the rear. Additional fan support is available:

• Алдыңкы: Up to 3 x 120mm or 3 x 140mm fans (up to 360mm radiator)
• Жогорку: Up to 2 x 120mm or 2 x 140mm fans (up to 280mm radiator)
• Арткы: 1 x 120mm fan (up to 120mm radiator)

Image: Diagram illustrating the fan and radiator support configurations for the front, top, and rear of the Antec NX410 case.

Important Fan Connection: If fans work in tandem but haven't connected the main fan with the secondary fans, the secondary fans will not function. The fan kit works in sync with the motherboard for ARGB lighting.

Image: Diagram detailing the fan installation process, showing how major and secondary fans connect via 4-pin headers. A warning about secondary fans not functioning if the main fan is not connected is included.

For optimal cooling, ensure proper fan orientation for intake and exhaust airflow.

2.5 Кабелди башкаруу

The case offers various tie-down points and cutouts behind the motherboard tray to facilitate clean cable routing, improving airflow and aesthetics.

Сүрөт: Арткы салон view of the Antec NX410 case, showing pre-routed cables and space for cable management behind the motherboard tray.

3. Иштөө нускамалары

3.1 Алдыңкы киргизүү/чыгаруу порттору

Үстүнкү панелде оңой жетүү үчүн ыңгайлуу киргизүү/чыгаруу порттору бар:

• Кубат баскычы
• LED башкаруу баскычы: A single press changes the front panel's ARGB lighting effect.
• USB 3.0 x 1
• USB 2.0 x 2
• HD-AUDIO (Headphone and Microphone Jacks)

Сүрөт: Жакын план view of the top I/O ports on the Antec NX410 case, including power, LED control, USB 3.0, USB 2.0, and HD-Audio jacks.

3.2 ARGB Жарыкты башкаруу

The pre-installed ARGB fans can be controlled via the LED control button on the top I/O panel. A single press cycles through various lighting effects. For motherboard synchronization, ensure the ARGB controller is properly connected to your motherboard's ARGB header.

Image: Close-up of the LED control button on the front panel of the Antec NX410 case, used to change ARGB lighting effects.

4. Техникалык тейлөө

4.1 Чаң чыпкасын тазалоо

The Antec NX410 includes dust filters to help maintain a clean interior and optimal airflow. Regularly clean these filters to prevent dust buildup.

• Жогорку чаң чыпкасы: The top panel features a removable magnetic dust filter. Gently lift and remove it for cleaning.
• PSU чаң чыпкасы: A removable dust filter is located at the bottom of the case, beneath the power supply unit. Slide it out for cleaning.

Use a soft brush or compressed air to remove dust from the filters. Washable filters can be rinsed with water and allowed to dry completely before reinstallation.

4.2 Чыңалган айнекке кам көрүү

To clean the tempered glass side panel, use a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive materials that could scratch the glass.

5. Кыйынчылыктарды

5.1 ARGB чырактары иштебей жатат

If your ARGB lights are not functioning:

• Check Fan Connections: Ensure all ARGB fans are correctly connected to the ARGB controller, and the controller is properly powered and connected to the motherboard (if using motherboard sync). Refer to the "Fan Installation and Support" section for connection details.
• LED башкаруу баскычы: Press the LED control button on the top I/O panel to cycle through lighting modes. If no lights appear, verify power connections.

5.2 Желдетүүчү ызы-чуу

If you experience unusual fan noise:

• Тоскоолдуктарды текшерүү: Ensure no cables or other components are interfering with the fan blades.
• Монтаждык бурамалар: Verify that all fan mounting screws are tightened securely to prevent vibrations.
• Чаңдын пайда болушу: Clean any dust buildup on fan blades or filters, as excessive dust can cause imbalance and noise.

6. Техникалык шарттар

7. Кепилдик жана колдоо

Кепилдик жөнүндө маалымат жана техникалык колдоо алуу үчүн, сураныч, расмий Antec компаниясына кайрылыңыз website or contact Antec customer service directly. Keep your proof of purchase for warranty claims.

кире аласыз Amazon'догу Antec дүкөнү көбүрөөк продукт маалымат жана колдоо ресурстар үчүн.