GOOLOO GP80 800A Peak SuperSafe Car Jump Starter User Manual

1. Киришүү

Thank you for choosing the GOOLOO GP80 800A Peak SuperSafe Car Jump Starter. This portable and powerful device is designed to jump start 12V vehicles with up to 4.5L gas engines, and can also serve as a portable power bank for charging various electronic devices. Please read this manual carefully before use to ensure safe and optimal performance.

Image: The GOOLOO GP80 jump starter connected to a car battery, demonstrating its primary function.

2. Коопсуздук боюнча маанилүү маалымат

Always observe the following safety precautions when using the GOOLOO GP80 jump starter:

• Жок immerse the unit in water or expose it to rain.
• Жок operate the unit if it has been severely damaged or dropped.
• Жок disassemble the unit. Only qualified service personnel should repair this device.
• Жок use the jump starter to charge non-rechargeable batteries.
• Колдонуу учурунда туура желдетүүнү камсыз кылыңыз.
• Балдар жетпеген жерде сактаңыз.
• Wear eye protection when working near batteries.
• cl туташтырууamps correctly: Red to Positive (+) жана Black to Negative (-). Reverse polarity can cause damage.
• Remove the jump starter from the vehicle battery within 30 seconds after the vehicle starts.

3. Пакеттин мазмуну

Please check the package contents upon opening. If anything is missing or damaged, contact GOOLOO customer support.

• GOOLOO GP80 секирүү стартери
• Smart Jumper Clamps
• USB-C заряддоо кабели
• User Manual
• Storage Case (may vary by package)

Image: The GOOLOO GP80 jump starter unit shown with its smart jumper clamps.

4. Продукттун өзгөчөлүктөрү жана компоненттери

Familiarize yourself with the different parts of your GP80 jump starter:

• Кубат баскычы: Turns the unit on/off and activates the flashlight.
• Батарея деңгээлинин көрсөткүчү: LED lights showing the remaining battery capacity.
• USB Output Port (Quick Charge): Смартфондорду, планшеттерди жана башка USB түзмөктөрүн кубаттоо үчүн.
• USB-C киргизүү/чыгаруу порту: For charging the jump starter itself or charging other devices.
• 12V Jump Start Port: Connects to the smart jumper clamps.
• LED фонарик: Provides illumination, with multiple modes (steady, strobe, SOS).

5. Charging the GP80 Jump Starter

Before first use, fully charge the GP80. It is recommended to recharge the unit every 3 months to maintain battery health, even if not used.

1. Connect the provided USB-C charging cable to the USB-C Input/Output port on the GP80.
2. Connect the other end of the USB-C cable to a USB wall adapter (not included) or a powered USB port.
3. The battery level indicator lights will illuminate and flash during charging. All lights will be solid when fully charged.

A full charge typically takes 3-4 hours depending on the power source.

6. Иштөө нускамалары

6.1. Унааны баштоо

Ensure the GP80 is at least 50% charged before attempting to jump start a vehicle.

1. Connect the Smart Jumper Clamps: Insert the blue plug of the smart jumper clamps into the 12V Jump Start Port on the GP80. Ensure it is fully inserted.
2. Унаа батареясына туташуу:
   • туташтыруу КЫЗЫЛ (+) clamp унаанын аккумуляторунун оң терминалына.
   • туташтыруу КАРА (-) clamp to the negative terminal of the car battery or a solid metal part of the car chassis (unpainted metal).

   акылдуу clamps have indicator lights and an audible alarm for safety. Refer to the clamp's manual for specific error codes.
3. Унааны баштоо: Бир жолу clamps are correctly connected and the smart clamp indicator light is solid green, start your vehicle's engine.
4. Clamps: As soon as the vehicle starts, remove the smart jumper clamps from the car battery first, then disconnect the blue plug from the GP80.

Маанилүү: Do not crank the engine for more than 3 seconds. If the vehicle does not start, wait at least 30 seconds before attempting again. Do not attempt more than 3 consecutive jump starts.

6.2. Мобилдик түзмөктөрдү кубаттоо

The GP80 can also function as a portable power bank.

1. Connect your device's USB charging cable to either the USB Output Port (Quick Charge) or the USB-C Input/Output Port on the GP80.
2. Кабелдин экинчи учун мобилдик түзмөгүңүзгө туташтырыңыз.
3. The GP80 will automatically begin charging your device.

6.3. Светодиоддук кол чыракты колдонуу

The built-in LED flashlight has multiple modes for convenience.

• Press and hold the Power Button for 3 seconds to turn on the flashlight (steady mode).
• Press the Power Button once to switch to Strobe mode.
• Press the Power Button again to switch to SOS mode.
• Press the Power Button once more to turn off the flashlight.

7. Техникалык тейлөө

Proper maintenance ensures the longevity of your GP80 jump starter.

• Сактагыч: Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. The ideal storage temperature is between -20°C to 60°C (-4°F to 140°F).
• Толуктоо: Recharge the unit at least once every three months to prevent deep discharge and prolong battery life.
• Тазалоо: Агрегатты тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Катуу химиялык заттарды же абразивдүү материалдарды колдонбоңуз.
• Батареяга кам көрүү: Avoid fully discharging the battery frequently. Charge it when the battery indicator shows 2-3 bars.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана колдоо

GOOLOO products come with a standard warranty. For detailed warranty information, product registration, or technical support, please visit the official GOOLOO webсайтка же кардарларды тейлөө тобуна кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

GOOLOO Official Webсайт: www.gooloo.com

Кардарларды тейлөө электрондук почтасы: support@gooloo.com