ABUS 8808C Combination Chain Lock User Manual

Introduction

Thank you for choosing the ABUS 8808C Combination Chain Lock. This manual provides essential information for the proper setup, operation, and maintenance of your lock. Designed for good protection against medium risk of theft, this chain lock features an 8 mm thick square chain made of specially hardened steel and a 4-digit individually adjustable number combination.

Негизги өзгөчөлүктөрү

• Коопсуздук деңгээли: ABUS security level 9 out of 15, suitable for bikes with medium risk of theft.
• Chain Construction: 8 mm thick square chain crafted from specially hardened steel for enhanced resistance.
• Комбинацияланган кулпу: Features a 4-digit number combination that is individually adjustable.
• Узактыгы: Number rollers made of 2 components ensure permanent legibility of numbers.
• Өлчөмдөрү: Length 85 cm, weight approximately 1966 g.

Продукт компоненттери

Figure 1: The ABUS 8808C Combination Chain Lock in its entirety, showcasing the chain and integrated lock mechanism.

2-сүрөт: Детальдуу view of the 4-digit combination mechanism and the locking pin, showing how the lock opens.

The ABUS 8808C lock consists of a robust chain covered with a textile sleeve to protect bicycle paintwork, and an integrated combination lock head. The lock head contains the four-digit dial mechanism and the locking bolt.

Setup: Setting Your Personal Combination

Your ABUS 8808C lock comes with a factory preset combination, typically "0000". It is highly recommended to change this to a personal, memorable combination immediately after purchase.

1. Кулпуну ачыңыз: Dial the current combination (factory default "0000" or your last set combination) to align with the indicator marks. Pull the locking pin out of the lock body.
2. Кайра калыбына келтирүү механизмин табыңыз: Inside the lock body, usually near where the pin inserts, there is a small reset button or a rotatable component. For the ABUS 8808C, this is typically a rotatable collar or lever. Rotate this component 90 degrees clockwise or counter-clockwise (refer to specific markings if present).
3. Жаңы айкалыштыруу: With the reset mechanism engaged, dial your desired new 4-digit combination. Ensure the numbers are precisely aligned with the indicator marks.
4. Disengage Reset Mechanism: Rotate the reset component back to its original position. This locks in your new combination.
5. Жаңы айкалышты сынап көрүңүз: Scramble the dials. Then, dial your new combination and attempt to open the lock. If it opens, your new combination is successfully set. If not, repeat the steps carefully.

Маанилүү: Remember your new combination. There is no master key or backdoor to reset the combination if forgotten without knowing the current code.

Иштөө нускамалары

Велосипедиңизди кулпулоо

1. Кулпуну жайгаштырыңыз: Wrap the chain around your bicycle frame (and wheel, if possible) and a fixed object such as a bike rack, lamppost, or sturdy fence.
2. Insert Locking Pin: Align your current combination on the dials. Insert the free end of the chain's locking pin into the lock body until it clicks securely into place.
3. Шифрленген терүүлөр: Once the lock is closed, scramble the combination dials to secure the lock and prevent unauthorized opening.

Велосипедиңиздин кулпусун ачуу

1. Терүү айкалышы: Rotate the number dials to align your personal 4-digit combination with the indicator marks on the lock body.
2. Pull Pin: Once the correct combination is set, pull the locking pin out of the lock body.
3. Кулпуну алып салуу: Detach the chain from your bicycle and the fixed object.

Техникалык тейлөө

• Майлоо: Periodically apply a small amount of non-greasy lock lubricant (e.g., graphite-based or PTFE spray) into the moving parts of the dials and the locking pin insertion point. This helps maintain smooth operation, especially in dusty or wet environments.
• Тазалоо: Wipe down the chain and lock body with a damp cloth to remove dirt and grime. Avoid harsh chemicals that could damage the protective textile sleeve or the plastic components of the lock head.
• Текшерүү: Regularly inspect the chain for any signs of wear, cuts, or damage. Check the combination dials for smooth rotation and clear legibility.

Проблемаларды чечүү

Problem: Lock will not open with the correct combination.

• Чечим 1: Ensure each number is precisely aligned with the indicator marks. Sometimes a slight misalignment can prevent opening.
• Чечим 2: The combination might have been accidentally changed. Carefully re-enter the combination, ensuring no dial was inadvertently moved during storage or transport.
• Чечим 3: The mechanism might be stiff due to dirt or lack of lubrication. Apply lock lubricant as described in the Maintenance section and try again.

Problem: Dials are stiff or difficult to turn.

• Чечим: Apply lock lubricant to the dials and work them back and forth to distribute the lubricant. Clean any visible dirt or debris from around the dials.

Problem: Locking pin does not insert or remove smoothly.

• Чечим: Ensure the combination is correctly set before attempting to insert or remove the pin. Lubricate the pin and the insertion point. Check for any obstructions.

Техникалык шарттар

Кепилдик жана колдоо

ABUS products are manufactured to high quality standards and undergo strict quality control. For specific warranty information regarding your ABUS 8808C Combination Chain Lock, please refer to the warranty card included with your purchase or visit the official ABUS webсайт.

For technical support, troubleshooting assistance, or inquiries about spare parts, please contact ABUS customer service. Contact details can typically be found on the ABUS official webсайтында же продуктунун таңгагында.

ABUS расмий Webсайт: www.abus.com