BTF-LIGHTING FCOB CCT 24V LED тилке комплектинин колдонуу боюнча колдонмосу

1. Киришүү

1.1 Кош келиңиз

This manual provides detailed instructions for the installation, operation, and maintenance of your BTF-LIGHTING FCOB CCT 24V LED Strip Kit. Please read this manual thoroughly before use to ensure proper function and safety.

1.2 Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

• 1x 16.4FT FCOB CCT LED Strip
• 1x RF Controller
• 1x DC24V Power Supply

Image 1.1: Included components of the BTF-LIGHTING FCOB CCT 24V LED Strip Kit, featuring the LED strip, RF controller, and DC24V power supply.

2. Коопсуздук маалыматы

Please observe the following safety precautions to prevent damage to the product or personal injury:

• Бул продукт үчүн иштелип чыккан үй ичинде гана колдонуу (IP30 rating). Do not expose to water or high humidity.
• электр менен жабдууну камсыз кылуу voltage matches the product requirements (DC24V).
• Do not connect the LED strip directly to AC power.
• Avoid bending the LED strip sharply or applying excessive force, which may damage the circuit.
• Кандайдыр бир орнотуудан, техникалык тейлөөдөн же каталарды оңдоодон мурун электр энергиясын өчүрүңүз.
• Балдар жетпеген жерде сактаңыз.
• Do not cover the LED strip with flammable materials.

3. Техникалык шарттар

4. Орнотуу жана орнотуу

4.1 Даярдоо

• Unroll the LED strip and inspect it for any damage.
• Желимдин оптималдуу иштеши үчүн, орнотуу бетинин таза, кургак жана жылмакай экенине ынаныңыз.
• Plan the layout of your LED strip before peeling off the adhesive backing.
• If cutting is required, cut only along the designated cut marks (usually indicated by copper pads) on the LED strip.

Image 4.1: The flexible LED strip being installed using mounting clips, demonstrating its adaptability to various surfaces.

4.2 Mounting the LED Strip

1. Carefully peel off the blue protective film from the adhesive backing on the LED strip.
2. Press the LED strip firmly onto the desired clean surface, ensuring good contact along its entire length.
3. For additional security, especially on textured surfaces or corners, use the provided mounting clips (if included).

4.3 Компоненттерди туташтыруу

1. Connect the 4-pin connector of the LED strip to the output of the RF controller. Ensure the arrows on the connectors align.
2. Connect the DC24V power supply to the input of the RF controller.
3. Plug the DC24V power supply into a standard electrical outlet.

Image 4.2: A clear wiring diagram illustrating how to connect the FCOB CCT LED strip, RF controller, and DC24V power supply.

Image 4.3: The RF controller connected to the LED strip, ready for operation in a kitchen setting.

4.4 Күйгүзүү

Once all connections are secure, plug in the power supply. The LED strip should illuminate. If not, refer to the Troubleshooting section.

5. Иштөө нускамалары

5.1 RF алыстан башкаруу пультун колдонуу

The kit includes a 17-key RF remote control for convenient operation. Ensure the plastic tab is removed from the remote's battery compartment before first use.

Сүрөт 5.1: Детальдуу view of the 17-key RF wireless remote control, highlighting its various buttons for light adjustment.

5.2 Негизги функциялар

• КҮЙГҮЗҮҮ/ӨЧҮРҮҮ: басыңыз кызыл button to turn the lights on, and the кара аларды өчүрүү үчүн баскычты басыңыз.
• 60s Delay Off: Press the "60S DELAY OFF" button to set a 60-second timer before the lights turn off.

5.3 Түс температурасын жөндөө

The FCOB CCT LED strip allows for tunable white light from 2700K (Warm White) to 6500K (Cool White).

• CCT +/-: колдонуу сол жебе to decrease color temperature (warmer) and the оң жебе to increase color temperature (cooler).
• Preset CCT: Directly select desired color temperatures using the dedicated buttons: 2700K, 3200K, 4000K, 5000K, 5500K, 6500K.

Image 5.2: Visual representation of color temperature adjustment, ranging from warm 2700K to cool 6500K, suitable for various environments.

5.4 Жарыктыкты башкаруу

• Bright/Speed+: Жарыктыкты жогорулатуу.
• Bright/Speed-: Жарыктыкты азайтыңыз.

Image 5.3: Illustration of multiple brightness levels, from 0% to 100%, demonstrating the dimming capability of the LED strip.

5.5 Dynamic Modes and Scenes

The remote offers various dynamic modes and preset scenes:

• Режим: Cycle through different dynamic lighting effects.
• Күндүн чыгышы/батышы: Activate preset lighting scenes simulating sunrise or sunset.
• Түнкү жарык: Activate a low-brightness night light mode.

Image 5.4: The RF wireless remote control offers memory function, 3 scenes, and 6 dynamic modes for versatile lighting options.

5.6 Эстутум функциясы

The controller features a memory function. After the controller is powered off and then restarted, the last used lighting effect (color temperature and brightness) will be maintained, eliminating the need to reset it.

Image 5.5: The memory function ensures that the LED strip retains its last lighting settings after being powered off and on.

6. Техникалык тейлөө

6.1 Кам көрүү жана тазалоо

• To clean the LED strip, gently wipe it with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the strip.
• Тазалоодон мурун электр кубаты өчүрүлгөнүн текшериңиз.

6.2 Сактоо

• If storing the LED strip for an extended period, ensure it is clean and dry.
• Күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.

7. Кыйынчылыктарды

If you encounter issues with your LED strip, refer to the table below for common problems and solutions.

8. Кепилдик жана Кардарларды колдоо

8.1 Кепилдик маалыматы

BTF-LIGHTING provides a 12 айлык тынчсыздануу-эркин кепилдик for this product. This warranty covers manufacturing defects and issues arising from normal use. It does not cover damage caused by misuse, improper installation, or unauthorized modifications.

8.2 Кардарларды колдоо

For technical assistance, warranty claims, or any questions regarding your BTF-LIGHTING product, please contact our customer service team. We offer 24/7 кардарларды тейлөө.

Visit the official BTF-LIGHTING store for more information: BTF-LIGHTING Store

9. Продукт видеолору

10. Негизги өзгөчөлүктөрү

10.1 Ultra Bright and Uniform Illumination

The FCOB (Flip Chip On Board) technology provides a dense light-emitting surface, resulting in a brighter, softer, and more uniform light output without visible light spots, unlike traditional SMD LED strips.

Image 10.1: Comparison of beam angles, showing the FCOB LED strip's 180-degree illumination versus traditional SMD strips' 120-degree, highlighting uniform light distribution.

10.2 High Color Rendering Index (CRI 90+)

With a CRI of over 90, the LED strip accurately renders colors, making objects appear more vibrant and true to their original hues.

Image 10.2: A visual comparison demonstrating the superior color rendering of CRI 90+ lighting compared to CRI 80+, showing more natural and vibrant colors.

10.3 Durable and Energy Efficient Design

Constructed with a double-layer PCB board and high-quality materials, this LED strip is designed for durability and a long lifespan of over 50,000 hours. The FCOB technology also contributes to higher energy efficiency.

Image 10.3: Infographic highlighting key features such as better conductivity, ultra-bright efficiency, seamless glow, tunable color temperature, and a long lifespan of 65,000+ hours.

11. Тиркемелер

The BTF-LIGHTING FCOB CCT LED Strip Kit is suitable for a wide range of indoor lighting applications, including:

• Kitchen under-cabinet lighting
• Bedroom accent lighting
• Stairway illumination
• Mirror backlighting
• Corridor lighting
• DIY lighting projects
• Shelf and display lighting

Image 11.1: Collage showcasing diverse indoor applications, such as kitchen, office, and living room lighting, demonstrating the strip's versatility.