1. Киришүү
This manual provides detailed instructions for the installation, operation, and maintenance of the Visionis VIS-3002 FPC-5674 Access Control Keypad System. This standalone indoor access control system features a digital touch keypad, a mini controller, Wiegand 26 compatibility, and supports EM cards and key fobs for up to 1000 users. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Пакеттин мазмуну
Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:
- (1) VIS-3002 Access Control Indoor Only Digital Touch Keypad + Reader Standalone
- (1) VIS-MINI-CNTRL: 1 Door Controller for Access Control Systems
- (10) VS-VIS-KEYTAG: Access Control Proximity Contactless Smart Entry Keyfobs (26 bit, 125khz)
- (1) VISCP200: 12V 2Amp Power Supply Transformer (UL Listed)
- Монтаждоо бурамдары жана дубал анкерлери
- Screwdriver
- Электр зымдары
- Diode IN4004 (for relay circuit protection)
- Master Add Card
- Master Delete Card
Figure 2.1: Visionis VIS-3002 Kit Contents, including the mini controller, remote control, Master Add Card, Master Delete Card, Diode IN4004, self-tapping screws, wall anchors, and screwdriver.
Figure 2.2: Visionis VIS-3002 Keypad System components including keypad, mini controller, power supply, and key fobs.
3. Өзгөчөлүктөрү
- Колдонуучунун сыйымдуулугу: Supports up to 1000 users.
- Кирүү режимдери: PIN code, proximity card, and/or proximity key tag.
- Mini Controller (VIS-MINI-CNTRL): Provides enhanced security by storing credentials internally, preventing tampering with the external keypad.
- Wiegand 26 Input/Output: Compatible with various Wiegand readers.
- Анти-Т.amper Ойготкуч: Activates if the keypad is illegally removed.
- Backlight Keypad: Easy to operate in low-light conditions.
- Картаны колдоо: 125KHz for EM cards and 13.56MHz for MFR cards.
- External Wired Doorbell Support: Allows connection of an external doorbell.
- Тез окуу: Searching time less than 0.1s after reading a card.
- Микропроцессор: Built-in USA Atmel microprocessor for high security and reliability.
Видео 3.1: Расмий продукт бүттүview video for the Visionis VIS-3002 Access Control Keypad System, demonstrating its features and components.
Figure 3.2: Illustration of access methods for the Visionis VIS-3002 keypad: card, PIN code, and NFC phone access.
4. Техникалык шарттар
| Спецификация | Деталь |
|---|---|
| Модел | VIS-3002 FPC-5674 |
| Бренд | Visionis |
| Power Source | Corded Electric (12V 2Amp) |
| Байланыш технологиясы | Зымдуу |
| Башкаруу ыкмасы | тийүү |
| Колдонуучунун кубаттуулугу | 1000 колдонуучулар |
| Wiegand Interface | Виганд 26 |
| Карта жыштыгы | 125KHz (EM cards), 13.56MHz (MFR cards) |
| Иштөө температурасы | -45°C ~ 55°C (-49°F ~ 131°F) |
| Иштөө нымдуулугу | 0% ~ 95% |
| Keypad Dimensions (H x W x D) | 116 мм (4.56 дюйм) x 71 мм (2.79 дюйм) x 22 мм (0.86 дюйм) |
| Mini Controller Dimensions (L x W x H) | 65 мм (2.56 дюйм) x 54 мм (2.13 дюйм) x 19 мм (0.75 дюйм) |
Figure 4.1: Dimensions of the Visionis VIS-3002 keypad: 116mm (4.56in) height, 71mm (2.79in) width, 22mm (0.86in) depth.
Figure 4.2: Dimensions of the Visionis VIS-MINI-CNTRL mini controller: 65mm (2.56in) length, 54mm (2.13in) width, 19mm (0.75in) height.
5. Орнотуу жана орнотуу
5.1 Коопсуздукту эске алуу
For optimal security, the VIS-MINI-CNTRL mini controller should be installed inside a restricted, secure area. All user credentials are stored on the mini controller, not on the external keypad. This prevents unauthorized access even if the external keypad is tampменен түзүлөт же жок кылынат.
Figure 5.1: Illustration of secure installation, with the mini controller installed inside a restricted area, controlling the locking device.
5.2 Системаны өткөрүү
The VIS-3002 keypad connects to the VIS-MINI-CNTRL mini controller via a Wiegand 26 interface. The mini controller then manages the locking device (e.g., magnetic lock, electric strike) and other peripherals like an exit button or doorbell.
- Connect the keypad's Wiegand output (D0, D1) to the mini controller's Wiegand input.
- Connect the 12V DC power supply to the mini controller.
- Wire the locking device to the NO (Normally Open) or NC (Normally Closed) terminals on the mini controller, as required by your lock type. Ensure the Diode IN4004 is installed across the lock terminals for relay protection.
- Connect an exit button to the 'OPEN' terminal and GND on the mini controller.
- Connect an external doorbell to the appropriate terminals if desired.
Figure 5.2: Diagram showing the Visionis VIS-MINI-CNTRL mini controller connected to various Wiegand readers, illustrating its versatility.
Figure 5.3: Internal board view жана тарап view of the Visionis VIS-MINI-CNTRL mini controller, showing connection points.
Figure 5.4: The 12V 2Amp power supply transformer included with the Visionis VIS-3002 system.
6. Операция
6.1 Колдонуучуларды кошуу
Use the Master Add Card to enroll new proximity cards or key fobs. Follow the specific programming instructions provided with your mini controller for adding user PINs.
6.2 Gaining Access
Users can gain access using one of the following methods:
- ПИН код: Enter your assigned PIN code on the keypad.
- Proximity Card/Key Fob: Present your registered card or key fob to the keypad reader.
- Card + PIN: For enhanced security, some configurations may require both a card/key fob and a PIN code.
The keypad features a backlight for easy visibility and operation at night.
6.3 Exiting
To exit, press the connected exit button or use the remote control if configured.
7. Техникалык тейлөө
- Тазалоо: Wipe the keypad surface with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Туташуу текшерүү: Мезгил-мезгили менен бардык зымдарды байланыштарды текшерип, алар бекем жана коррозияга учурабайт.
- Программалык камсыздоонун жаңыртуулары: Check the Visionis webсистемаңыз үчүн жеткиликтүү болгон программалык камсыздоо жаңыртуулары үчүн сайт.
8. Кыйынчылыктарды
- Кубат жок: Ensure the 12V 2Amp power supply is correctly connected and receiving power. Check all wiring.
- Баскычтоп жооп бербейт: Verify power supply. If the keypad is completely unresponsive, check for loose connections or damage.
- Кирүү четке кагылды: Ensure the card/key fob is correctly enrolled. Verify the PIN code is correct. Check if the user capacity has been reached.
- Анти-Т.amper Ойготкуч: If the alarm sounds, it indicates the keypad has been illegally removed or tampered with. Re-secure the keypad and reset the system if necessary.
- Эшик ачылбай жатат: Check the wiring to the locking device and ensure it is receiving power from the mini controller. Verify the lock type (NO/NC) matches the controller's configuration.
For further assistance, please contact Visionis customer support.
9. Кепилдик жана колдоо
Visionis products are designed for reliability and performance. For warranty information and technical support, please refer to the official Visionis webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.
