Micro T3144 май чыпкасынын колдонуу боюнча колдонмосу

1. Продукт бүтүп калдыview

The Micro T3144 is an oil filter manufactured by Japan Micro Filter Industry. This component is crucial for maintaining engine health by filtering contaminants from the engine oil.

Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:

• Original Product Number: 15209-Т9000
• Designed to remove impurities from engine oil.
• Manufactured by Japan Micro Filter Industry.

Сүрөт 1.1: The Micro T3144 Oil Filter. The image displays the oil filter itself, which is black with white text, alongside its yellow and white packaging box. The box features the "MICRO" logo prominently. The filter has visible threads and a gasket for installation.

2. Орнотуу (Орнотуу)

Proper installation of the oil filter is essential for its effective operation and to prevent oil leaks. Always refer to your vehicle's specific service manual for detailed instructions and safety precautions.

2.1. Керектүү куралдар жана материалдар

• New Micro T3144 Oil Filter
• New engine oil (correct type and viscosity for your vehicle)
• Май чыпкасынын ачкычы
• Көмөч казан
• Socket wrench and appropriate socket for drain plug
• Воронка
• Чүпүрөктөрдү же дүкөндүн сүлгүлөрүн тазалаңыз
• Коргоочу көз айнек жана кол каптар

2.2. Орнотуу кадамдары

1. Унааны даярдоо: Ensure the engine is cool. Park the vehicle on a level surface and engage the parking brake. For safety, consider using jack stands if lifting the vehicle.
2. Эски майды төгүңүз: Place the drain pan under the oil drain plug. Remove the drain plug and allow all the old oil to drain completely. Reinstall the drain plug with a new washer if required, and tighten to the manufacturer's specifications.
3. Эски чыпканы алып салуу: Position the drain pan under the old oil filter. Use an oil filter wrench to loosen and remove the old filter. Be prepared for residual oil to spill.
4. Жаңы чыпканы даярдоо: Apply a thin film of new engine oil to the rubber gasket of the new Micro T3144 filter. This helps ensure a good seal.
5. Жаңы чыпканы орнотуу: Screw the new filter onto the engine by hand until the gasket makes contact with the mounting surface. Then, tighten it an additional 3/4 to 1 full turn, or as specified by your vehicle's manual. Ашыкча катуулабагыла.
6. Жаңы май кошуу: Using a funnel, add the recommended amount and type of new engine oil to the engine.
7. Агышууларды текшерүү: Start the engine and let it run for a few minutes. Check for any oil leaks around the new filter and the drain plug. Turn off the engine and recheck the oil level after a few minutes, adding more if necessary.
8. Эски материалдарды жок кылуу: Эски майды жана чыпканы ыйгарым укуктуу кайра иштетүү борборунда туура жок кылыңыз.

3. Функциясы жана колдонулушу

The Micro T3144 oil filter is designed to remove harmful contaminants from your engine's lubricating oil. These contaminants can include dirt, metal particles, sludge, and unburned fuel byproducts. By trapping these impurities, the oil filter helps to:

• Protect engine components from wear and tear.
• Maintain optimal engine performance.
• Extend the lifespan of the engine.
• Ensure the engine oil remains clean and effective.

The filter operates continuously whenever the engine is running, circulating oil through its filtration media.

4. Техникалык тейлөө

Regular replacement of the oil filter is crucial for engine longevity. An old, clogged filter can restrict oil flow, leading to engine damage.

4.1. Алмаштыруу графиги

It is generally recommended to replace the oil filter every time you change your engine oil. Consult your vehicle manufacturer's owner's manual for the precise oil and filter change intervals, as these can vary based on vehicle model, driving conditions, and oil type.

Typical intervals range from every 5,000 to 15,000 kilometers (3,000 to 10,000 miles) or every 6 to 12 months, whichever comes first.

4.2. Signs of a Clogged Filter (Rare)

While rare if replaced regularly, a severely clogged oil filter might exhibit symptoms such as:

• Кыймылдаткычтын иштеши төмөндөгөн.
• Illumination of the oil pressure warning light (indicating low oil pressure due to restricted flow).
• Мотордун адаттан тыш үндөрү.

If you experience any of these symptoms, have your vehicle inspected by a qualified mechanic immediately.

5. Кыйынчылыктарды

Most issues related to oil filters stem from improper installation or using an incorrect filter type. Here are common troubleshooting scenarios:

5.1. Oil Leaks After Installation

• Себеби: Gasket not properly seated, old gasket stuck to engine block, filter not tightened enough, or overtightened.
• Чечим:
  1. Ensure the old filter's gasket was removed from the engine block.
  2. Verify the new filter's gasket is clean and properly lubricated.
  3. Tighten the filter by hand until snug, then an additional 3/4 to 1 full turn. Avoid overtightening, which can damage the gasket or filter housing.

5.2. Low Oil Pressure Warning Light

• Себеби: Severely clogged filter (unlikely if replaced regularly), incorrect oil level, or a faulty oil pressure sensor.
• Чечим:
  1. Check engine oil level and add oil if necessary.
  2. If the filter is old, replace it.
  3. If the issue persists, consult a professional mechanic.

5.3. Filter Does Not Fit

• Себеби: Incorrect filter model for your vehicle.
• Чечим: Double-check your vehicle's specifications and ensure you have the correct Micro filter model (T3144 or equivalent) for your specific make and model.

6. Техникалык шарттар

7. Кепилдик маалыматы

Specific warranty details for the Micro T3144 Oil Filter are not provided in the product information. For any warranty-related inquiries, please contact the manufacturer, Japan Micro Filter Industry, or your point of purchase directly.

8. Кардарларды колдоо кызматы

For technical assistance, product inquiries, or support regarding the Micro T3144 Oil Filter, please refer to the official website of Japan Micro Filter Industry or contact the retailer from whom the product was purchased. No direct customer support contact information is available in this manual.