One Control OC10W

One Control Crocodile Tail Loop Wing (OC10W) User Manual

Model: OC10W | Brand: One Control

1. Продукт бүтүп калдыview

The One Control Crocodile Tail Loop Wing (OC10W) is an advanced programmable 10-channel loop switcher designed to optimize your guitar effects setup. It integrates user feedback and technical advancements to provide flexible signal routing, comprehensive MIDI control, and convenient remote programming via Bluetooth.

Фронт view of the One Control Crocodile Tail Loop Wing (OC10W)

Сүрөт 1: Алдыңкы view of the One Control Crocodile Tail Loop Wing (OC10W), showing the display, footswitches, and input/output jacks.

2. Орнотуу колдонмосу

2.1. Power Connection

Connect a standard 9V DC power supply (not included) to the 9V DC input jack on the rear panel of the OC10W. Ensure the power supply meets the required specifications (9V, 150mA minimum).

2.2. Аудио байланыштары

  1. Connect your guitar or instrument to the INPUT джек.
  2. туташтыруу OUT1 or OUT2 джек сиздин ampкөтөргүчтүн киргизүүсү.
  3. For each effect pedal, connect the pedal's input to a ЖӨНӨТ jack (e.g., SEND1) and the pedal's output to the corresponding КАЙТУУ jack (e.g., RETURN1). The OC10W features seven serial mono loops (SEND1-7/RETURN1-7) and three parallel loops (SEND8-10/RETURN8-10).
  4. The тюнер output can be connected to a dedicated tuner pedal. This output features a mute switch for silent tuning.
Арткы view of the One Control Crocodile Tail Loop Wing (OC10W) showing all input/output jacks

2-сүрөт: Арткы view of the OC10W, illustrating the various input, output, send, and return jacks for audio connections.

2.3. MIDI туташуулары

Use standard MIDI cables to connect the MIDI IN жана MIDI OUT jacks to other MIDI-compatible devices for comprehensive control and synchronization.

2.4. Bluetooth Pairing (Winglink App)

The OC10W can be controlled and programmed remotely via the Winglink iOS app. Ensure Bluetooth is enabled on your iOS device and follow the app's instructions to pair with the OC10W. Look for the Winglink logo on the device.

Close-up of the Winglink logo and a footswitch on the OC10W

Figure 3: Close-up of the Winglink logo, indicating Bluetooth connectivity for the iOS app.

3. Операция

3.1. Иштөө режимдери

The OC10W supports two primary modes of operation:

  • Программа режими: Allows you to store and recall complex effect pedal combinations and MIDI commands as presets. The OC10W offers 168 MIDI presets.
  • Кол режими: Enables direct control over individual loops via the footswitches, allowing you to turn effects on and off instantly without recalling a preset.

3.2. Бутту которуштуруунун функциялары

The OC10W features multiple footswitches for versatile control:

  • PROGRAM / LOOP Footswitches (1-7): In Program Mode, these recall specific presets. In Manual Mode, they activate/deactivate the corresponding effect loops.
  • BANK+ / LOOP8 Footswitch: Used to increment banks in Program Mode or control Loop 8 in Manual Mode.
  • MUTE / LOOP9 Footswitch: Mutes the output for silent tuning or controls Loop 9.
  • FS3 / MULTI JACK Footswitch: Controls external devices via the FS3 jack or acts as a multi-function switch.
  • FS1, FS2, SLV: Additional footswitches for various control functions, often configurable.
Close-up of the footswitch section on the OC10W

Сүрөт 4: Жакын пландан view of the OC10W's footswitch section, including the main program/loop switches and control switches.

3.3. Дисплей жана индикаторлор

The central display shows the current bank/index, program number, or custom name. LED indicators provide visual feedback on active loops, MIDI status, and other functions.

Close-up of the digital display on the OC10W

Figure 5: Close-up of the OC10W's digital display, showing a typical preset indication.

4. Техникалык тейлөө

To ensure the longevity and optimal performance of your One Control Crocodile Tail Loop Wing, follow these maintenance guidelines:

  • Тазалоо: Use a soft, dry cloth to wipe down the unit. Avoid abrasive cleaners, solvents, or excessive moisture, which can damage the finish and internal components.
  • Сактагыч: Агрегатты күн нурунан, өтө температурадан жана жогорку нымдуулуктан алыс салкын, кургак жерде сактаңыз.
  • Байланыштары: Periodically check all cable connections (audio, MIDI, power) to ensure they are secure and free from damage. Loose connections can lead to signal loss or intermittent operation.
  • Бут өчүргүчтөр: While designed for durability, avoid excessive force when operating the footswitches.

5. Кыйынчылыктарды

If you encounter issues with your OC10W, refer to the following common problems and solutions:

КөйгөйМүмкүн себепЧечим
Кубат жок/Бирдик күйбөйтIncorrect power supply; Loose power connection; Faulty power supplyEnsure a 9V DC power supply is correctly connected. Verify power supply functionality.
Үн/Сигнал жоголбойтIncorrect audio connections; Faulty cables; Loop not active; Tuner mute engagedCheck all input, output, send, and return cables. Ensure the correct loops are active. Disengage tuner mute if active.
MIDI башкаруусу иштебей жататIncorrect MIDI connections; MIDI channel mismatch; Incorrect MIDI settingsVerify MIDI In/Out connections. Ensure MIDI channels match between devices. Check MIDI settings in the OC10W and connected devices.
Bluetooth байланышы көйгөйлөрүBluetooth off on device; App issues; InterferenceEnsure Bluetooth is enabled on your iOS device. Restart the Winglink app and the OC10W. Try pairing again.

6. Техникалык шарттар

ӨзгөчөлүкСпецификация
МоделCrocodile Tail Loop Wing (OC10W)
Effect түрүProgrammable 10-Channel Loop Switcher
Циклдер7x Serial Mono Loops, 3x Parallel Loops
Buffer CircuitBJF Buffer (switchable)
Айланып өтүү түрүTrue Bypass (when buffer is off)
Алдын ала орнотуулар168 MIDI Presets
ControlFootswitches, Full MIDI Control, Bluetooth (Winglink iOS app)
Кошумча функцияларTuner Out with Mute Switch, 3x FS Connectors (TRS), 8-pin DIN plug
Power SourceЭлектр зымдары
Тtage9 вольт
Ampөчүрүү150 миллионamps
Өлчөмдөрү (L x W x Y)46.5 x 12 x 8.5 см
Элемент Салмагы1.6 кг
Аппараттык интерфейсBluetooth
Сигнал форматыАналог

7. Кепилдик жана колдоо

One Control products are manufactured to high standards. For warranty information, technical support, or service inquiries, please contact One Control customer service or visit their official webсайт. Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.

Өндүрүүчү: One Control

Тектеш документтер - OC10W

Preview One Control Crocodile Tail Loop Колдонуучунун колдонмосу
One Control Crocodile Tail Loop үчүн колдонуучу колдонмосу, MIDI мүмкүнчүлүктөрү жана орнотулган BJF буфери бар флагмандык программалануучу педаль алмаштыргыч.
Preview Бир башкаруучу Chamaeleo куйрук илмеги MK2 колдонуучусунун колдонмосу
One Control Chamaeleo Tail Loop MK2 колдонуучусунун колдонмосу, 5 цикл, буфер жана интуитивдик башкаруу элементтери бар программалануучу гитара эффекттери цикл которгучу.
Preview One Control Caiman Tail Loop User Manual
User manual for the One Control Caiman Tail Loop, a 150 preset MIDI 5PC/CC with Tap Tempo Switcher. Details features, front and rear panel descriptions, PGM hierarchy, footswitch and MIDI settings, initialization setup, and specifications.
Preview Агамида куйругунун илмеги колдонуучунун колдонмосу
One Control Agamidae Tail Loop колдонуучусунун колдонмосу, анда анын функциялары, иштеши жана гитара эффекттеринин педалдарын башкаруу боюнча техникалык мүнөздөмөлөрү кеңири баяндалган.
Preview Gebruikershandleiding Chamaeleo Tail Loop MKIII - One Control
One Control Chamaeleo Tail Loop MKIII үчүн, 5-программалык луп которуштуруучу 4 сериялык циклди, 1 циклди, Mute/Tuner Out жана BJF Buffer сигналдарды багыттоо үчүн эффективдүү иштешет.
Preview BJF буфери бар бир башкаруу минималдуу сериялуу кара цикл колдонуучу колдонмосу менен
BJF Buffer менен One Control Minimal Series Black Loop колдонуучусунун колдонмосунда анын көп функциялуу цикл которгучу жана буфер катары функциялары, мүнөздөмөлөрү жана эксплуатациялык көрсөтмөлөрү кеңири баяндалган.