LUTEC Motion Activated Dual-Head Floodlight Instruction Manual

1. Киришүү

This manual provides detailed instructions for the safe installation, operation, and maintenance of your LUTEC Motion Activated Dual-Head Floodlight. Please read this manual thoroughly before installation and retain it for future reference.

Image 1.1: Two LUTEC Motion Activated Dual-Head Floodlight units.

2. Коопсуздук маалыматы

• Электр коопсуздугу: Always disconnect power at the circuit breaker before installing, servicing, or replacing any part of this fixture. If you are unsure about electrical wiring, consult a qualified electrician.
• Негиздөө: Электр тогуна урунбоо үчүн шаймандын жерге туура туташтырылганын текшериңиз.
• Лампочканын түрү: Use only PAR38 type bulbs as specified. Exceeding the maximum wattage (150W per head, 300W total) can cause overheating and damage.
• Сыртта колдонуу: This fixture is designed for outdoor use and is waterproof. Ensure all connections are sealed properly to maintain its waterproof rating.
• Жылуулук: Halogen bulbs can become very hot. Allow bulbs to cool completely before handling. Do not touch hot bulbs or fixtures.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

• LUTEC Motion Activated Dual-Head Floodlight Unit (2 Packs)
• Орнотуу жабдуулары (бурамалар, зым гайкалар, прокладка)

Эскертүү: Two 150-Watt medium base PAR38 halogen bulbs are required and are NOT included. This fixture is compatible with PAR38 LED, PAR38 incandescent, PAR38 halogen, and PAR38 dimmable CFL bulbs.

4. Продукциянын өзгөчөлүктөрү

• Кыймыл иштетилген сенсор: Detects motion up to 0-33 feet away with a wide 110-degree sensing angle.
• Жөнгө салынуучу таймер: Set the light duration for 1, 3, or 10 minutes after motion detection ceases.
• Кол менен жокко чыгаруу: Allows the light to remain on constantly for a selected period.
• Жөнгө салынуучу кош жарык баштары: Provides customizable coverage area with 360° adjustability.
• Туруктуу курулуш: Made from Polycarbonate material.
• Аба ырайына туруктуу: Waterproof design suitable for outdoor environments.
• Күч: Operates on 120 Volts, with a maximum total wattage of 300 watts (150W per head).
• Жарыктык: Up to 5200 lumens (with appropriate bulbs).

5. Орнотуу боюнча нускамалар

This floodlight is designed for wall-mount installation. Follow these steps carefully:

1. Орнотууга даярданыңыз: Turn off power at the circuit breaker before starting. Ensure the mounting surface is secure and can support the fixture.
2. Арматураны орнотуу: Secure the mounting bracket to the wall using the provided hardware. Connect the electrical wires (white to white, black to black, and ground wire) using wire nuts. Carefully tuck the wires into the junction box.
3. Арматураны тиркөө: Align the fixture with the mounting bracket and secure it with the provided screws. Ensure a tight seal to maintain waterproof integrity.
4. Лампаларды орнотуу: Screw in two PAR38 bulbs (not included) into the light heads. Do not overtighten.
5. Жарык баштарын тууралоо: Loosen the adjustment knobs on the light heads to position them as desired, then tighten the knobs to secure them.

Image 5.1: The floodlight is designed for easy wall-mount installation.

Image 5.2: The dual light heads can be adjusted 360 degrees for optimal coverage.

6. Иштөө нускамалары

After installation, restore power to the fixture. The floodlight features a motion sensor and adjustable settings.

6.1 Кыймыл сенсорунун жөндөөлөрү

The motion sensor has a 110-degree sensing angle and can detect motion up to 33 feet away. Adjust the sensor's position to cover the desired area.

Сүрөт 6.1: Кыймыл сенсорун аныктоо диапазону жана бурчу.

6.2 Adjustable Timer

The adjustable timer controls how long the light remains on after motion is detected. Use the switch on the sensor to select the desired duration:

• 1 MIN: Light stays on for 1 minute.
• 3 MIN: Light stays on for 3 minutes.
• 10 MIN: Light stays on for 10 minutes.
• СЫНОО: For initial setup and testing of the motion sensor's range and coverage.

Image 6.2: Timer settings on the motion sensor.

6.3 Кол менен жокко чыгаруу

The manual override option allows the light to be stayed on constantly for a selected period of time, bypassing the motion sensor. Refer to the specific instructions provided with your unit for activating and deactivating this feature, as it typically involves a sequence of turning the power switch on and off.

7. Техникалык тейлөө

7.1 Лампаны алмаштыруу

Лампочкаларды алмаштыруу үчүн:

1. Автоматтык өчүргүчтөн электр кубатын өчүрүңүз.
2. Allow bulbs to cool completely.
3. Carefully unscrew the old PAR38 bulbs.
4. Screw in new PAR38 bulbs (LED, incandescent, halogen, or dimmable CFL) of up to 150W each.
5. Күчтү калыбына келтириңиз.

7.2 Тазалоо

Аппаратты жана сенсордук линзаны мезгил-мезгили менен жумшак, d чүпүрөк менен тазалап туруңузamp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or sensor functionality.

8. Кыйынчылыктарды

• Жарык күйбөйт: Check power supply at the circuit breaker. Ensure bulbs are correctly installed and not burnt out. Verify sensor settings are not in 'TEST' mode or set to a very short duration.
• Жарык дайыма күйүп турат: Check if the manual override feature is activated. Ensure the timer setting is appropriate and not stuck.
• Сенсор кыймылды аныктабай жатат: Adjust the sensor's angle and range settings. Ensure there are no obstructions blocking the sensor's view. Clean the sensor lens if dirty.
• Жарык жымыңдайт: Check bulb connections. Ensure the correct bulb type and wattagе колдонулат.

9. Техникалык шарттар

10. Кепилдик жана колдоо

LUTEC provides quality assurance and offers 7*24h after-sales service. If any issues arise with your product, please contact LUTEC customer support for assistance.