Introduction
This manual provides essential information for the assembly, proper use, maintenance, and troubleshooting of your new tectake 800866 Padded Velvet Effect Chairs. Please read this manual carefully before assembly and use to ensure safe and optimal performance of your chairs. These chairs are designed for versatile use in various indoor settings such as kitchens, dining rooms, or offices, offering both comfort and a stylish aesthetic.
Пакеттин мазмуну
Чогултууну баштоодон мурун, бардык компоненттердин бар экенин жана бузулбаганын текшериңиз. Таңгактын курамында төмөнкүлөр болушу керек:
- 4 x Chair Seats (Padded Velvet Effect)
- 4 x Sets of Chair Legs (Steel, Black Finish)
- Necessary Assembly Hardware (screws, washers, Allen key)
Image: A complete set of four tectake 800866 chairs, as received in the package.
Орнотуу жана чогултуу
Assembly of the tectake 800866 chairs is straightforward and requires minimal tools. It is recommended to assemble the chairs on a soft, clean surface to prevent scratching the floor or the chair components.
- Компоненттерди таңгактан чыгаруу: Carefully remove all chair components and hardware from the packaging. Lay them out to ensure all parts are accounted for.
- Буттарды отургучка бекитүү: Align the leg frame with the pre-drilled holes on the underside of the chair seat. Insert the provided screws and washers.
- Кол менен бекемдөө бурамалар: Initially, hand-tighten all screws to allow for minor adjustments. Do not fully tighten yet.
- Adjust and Fully Tighten: Once all screws are in place, gently place the chair upright on a flat surface. Apply slight pressure to ensure the chair is level, then fully tighten all screws using the provided Allen key. Ensure all connections are secure.
- Туруктуулукту текшерүү: Before use, gently rock the chair to ensure it is stable and does not wobble. If wobbling occurs, loosen the screws slightly, adjust, and re-tighten.
Image: A diagram illustrating the key dimensions of the tectake 800866 chair, useful for understanding its structure during assembly.
Иштөө нускамалары
The tectake 800866 chairs are designed for comfortable seating in various indoor environments. To ensure longevity and safety, please adhere to the following guidelines:
- Колдонуу максаты: These chairs are intended for indoor use only. Avoid prolonged exposure to direct sunlight or extreme temperatures, which can damage the velvet fabric and frame.
- Салмак сыйымдуулугу: The maximum load capacity for each chair is 120 кг (болжол менен 264 фунт)Зыяндын же жаракаттын алдын алуу үчүн бул салмак чегинен ашпаңыз.
- Туура отургуч: Always sit centrally on the chair. Avoid standing on the chair or using it as a step stool.
- Пол коргоо: The chairs are equipped with plastic caps on the feet to protect your flooring. Ensure these caps are intact and clean to prevent scratches.
Image: tectake 800866 chairs in a dining room setting, illustrating their intended use.
Техникалык тейлөө жана кам көрүү
Regular maintenance will help preserve the appearance and extend the lifespan of your tectake 800866 chairs.
- Fabric Care (Velvet Effect):
- For general cleaning, gently vacuum the fabric using an upholstery attachment to remove dust and loose debris.
- Төгүлүп кетсе, дароо таза, кургак чүпүрөк менен сүртүңүз. Сүртпөңүз, анткени бул такты жайып, баркыт үймөгүн бузуп коюшу мүмкүн.
- For stubborn stains, a mild fabric cleaner designed for velvet or upholstery can be used. Test on an inconspicuous area first. Follow the cleaner's instructions carefully.
- Катуу химиялык заттарды, абразивдүү тазалагычтарды же ашыкча нымдуулукту колдонуудан алыс болуңуз.
- Frame Care (Steel Legs):
- Wipe the steel legs with a soft, damp cloth. Dry immediately to prevent water spots.
- Avoid abrasive cleaners or scouring pads that can scratch the finish.
- Пластикалык капкактар: Periodically check the plastic caps on the feet for wear or damage. Replace if necessary to continue protecting your floors.
- Аппараттык камсыздоону текшерүү: Every few months, check all screws and connections to ensure they remain tight. Re-tighten if loose.
Сүрөт: деталдуу view of the chair's velvet effect upholstery, highlighting the material for care instructions.
Проблемаларды чечүү
Бул жерде кээ бир жалпы маселелер жана алардын чечимдери болуп саналат:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Кресло жыйналгандан кийин солкулдайт. | Screws not tightened evenly or fully. Uneven floor surface. | Loosen all leg screws slightly, place the chair on a flat surface, apply gentle downward pressure, then re-tighten all screws firmly and evenly. Ensure the floor is level. |
| Полдогу чийиктердин издери. | Damaged or missing plastic caps on chair feet. Debris stuck to caps. | Inspect plastic caps. Clean any debris. Replace damaged or missing caps. |
| Fabric appears matted or discolored. | Accumulated dust/dirt. Improper cleaning. Prolonged direct sunlight exposure. | Gently vacuum the fabric. Follow recommended cleaning instructions. Avoid direct sunlight. |
| Колдонуу учурунда кычыраган үндөр. | Рамкадагы бош байланыштар. | Check and re-tighten all assembly screws. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | tectake |
| Модель аты | tectake 800866 |
| Түс | Brown-black |
| Продукт өлчөмдөрү (W x D x H) | Approx. 58 cm x 62 cm x 82 cm (22.83"W x 24.41"D x 32.28"H) |
| Seat Area (W x D) | Approx. 40 cm x 42 cm (15.75"W x 16.54"D) |
| Орундуктун бийиктиги | Болжол менен 47 см (18.5 дюйм) |
| Аркалыктын бийиктиги | Болжол менен 40 см (15.75 дюйм) |
| Height of Armrests from Ground | Approx. 63 - 66 cm (24.8 - 26 inches) |
| Колдуктардын ортосундагы аралык | Болжол менен 47 см (18.5 дюйм) |
| Максималдуу жүктөө жөндөмдүүлүгү | 120 кг (264 фунт) |
| Item Weight (per chair) | Болжол менен 5.9 кг (13 фунт) |
| Material (Coating) | 100% Polyester (Velvet Effect) |
| Material (Padding) | Полиуретан |
| Материал (фут) | Болот |
| Камтылган компоненттер | 4 отургуч |
| Ички/тышкы колдонуу | Indoor |
Кепилдик жана колдоо
For any questions, concerns, or support regarding your tectake 800866 Padded Velvet Effect Chairs, please contact tectake customer service. While specific warranty details are not provided in this manual, tectake stands behind the quality of its products.
For further assistance, please visit the official tectake store or contact their customer support channels. You can often find support information on the brand's official webсайт же продукт сатылып алынган сатуучу аркылуу.
Интернет дүкөн: Visit the tectake Store on Amazon
