1. Киришүү
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Moxa LM-7000H-4TX Fast Ethernet Module. This module is designed to expand the connectivity of Moxa PT-G7728 and PT-G7828 Series Ethernet Switches by adding four 10/100Base-TX ports.
Түзмөктүн туура иштешин камсыз кылуу жана бузулуулардын алдын алуу үчүн, орнотуудан же иштетүүдөн мурун, ушул колдонмону кылдат окуп чыгыңыз.
2. Продукт бүтүп калдыview
1-сүрөт: Moxa LM-7000H-4TX Fast Ethernet Module. This image displays the compact, black industrial module featuring four RJ45 Ethernet ports on the front panel, labeled 1 through 4. Each port has corresponding LED indicators. The module also shows the "MOXA" brand logo and a heat sink design on its top surface, indicating its robust construction for industrial environments. Two knurled screws are visible on the sides for secure mounting.
The LM-7000H-4TX module is a hot-swappable expansion unit, providing additional Fast Ethernet connectivity. It integrates seamlessly with compatible Moxa switches, offering reliable data transmission for industrial applications.
Пакеттин мазмуну:
- 1 x LM-7000H-4TX Fast Ethernet Module
- Quick Installation Guide (if applicable, refer to switch manual for full documentation)
3. Орнотуу
The LM-7000H-4TX module is designed for easy installation into compatible Moxa PT-G7728/G7828 Series Ethernet Switches.
3.1 Коопсуздук чаралары
- Ensure the host switch is powered off or in a safe state before installing or removing the module.
- Handle the module by its edges to avoid touching electronic components.
- Use appropriate electrostatic discharge (ESD) precautions.
3.2 Module Installation Steps
- Locate an available module slot on your Moxa PT-G7728 or PT-G7828 Series Ethernet Switch. Refer to your switch's manual for slot identification.
- Carefully align the LM-7000H-4TX module with the designated slot.
- Gently push the module into the slot until it is firmly seated. Ensure the connectors are fully engaged.
- Secure the module using the integrated knurled screws on the sides of the module. Tighten them by hand until snug.
- Power on the host switch. The switch will detect the new module automatically.
3.3 Ethernet кабелдерин туташтыруу
Once the module is installed, connect standard RJ45 Ethernet cables to the 10/100Base-TX ports on the front panel. Ensure cables are securely plugged in.
4. Операция
After successful installation, the LM-7000H-4TX module operates as an integral part of the host Ethernet switch, providing four additional Fast Ethernet ports.
4.1 LED көрсөткүчтөрү
The module features LED indicators for each port to provide status information:
- Link/Act LED (ар бир порт үчүн):
- Жашыл (катуу): Indicates a valid network link is established.
- Жашыл (Жалтылдап): Indicates data activity (transmitting or receiving data).
- Өчүк: No network link or cable connected.
- Speed LED (per port, if applicable):
- Жашыл (катуу): Indicates 100 Mbps connection speed.
- Өчүк: Indicates 10 Mbps connection speed.
- M/S LED (Module Status):
- Жашыл (катуу): Модуль нормалдуу иштеп жатат.
- Red (Solid/Flashing): Indicates a module error or fault. Refer to the switch's diagnostic tools.
Note: Specific LED behavior may vary slightly; refer to the host switch's comprehensive manual for detailed LED descriptions.
5. Техникалык тейлөө
The LM-7000H-4TX module is designed for minimal maintenance. However, periodic checks can ensure optimal performance.
5.1 Тазалоо
- Ensure the module and host switch are powered off before cleaning.
- Use a soft, dry, lint-free cloth to wipe the exterior of the module.
- Do not use liquid or aerosol cleaners directly on the module.
- Keep the RJ45 ports free from dust and debris. Use compressed air if necessary, ensuring it is dry and oil-free.
5.2 Айлана-чөйрөнү коргоо
- Модулду белгиленген температура жана нымдуулук диапазондорунда иштетиңиз.
- Ensure adequate ventilation around the host switch to prevent overheating.
6. Кыйынчылыктарды
This section provides solutions to common issues encountered with the LM-7000H-4TX module.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| No Link LED on port |
|
|
| Байланыш ылдамдыгы жай |
|
|
| M/S LED is Red |
|
|
For more advanced troubleshooting, refer to the comprehensive user manual of your Moxa PT-G7728/G7828 Series Ethernet Switch or contact Moxa technical support.
7. Техникалык шарттар
| Өзгөчөлүк | Description |
|---|---|
| Модел | LM-7000H-4TX |
| Интерфейс | 4 x 10/100Base-TX (RJ45) |
| Шайкештик | Moxa PT-G7728 and PT-G7828 Series Ethernet Switches |
| Маалымат ылдамдыгы | 10/100 Mbps, Auto-negotiation |
| Туташтыргычтар | RJ45 |
| Өндүрүүчү | MOXA |
| Элемент Салмагы | 6.99 фунт (болжол менен 3.17 кг) |
| Биринчи жеткиликтүү күн | 6-январь, 2021-жыл |
8. Кепилдик жана колдоо
8.1 Кепилдик маалыматы
Moxa products are typically covered by a standard manufacturer's warranty. For specific warranty terms and conditions applicable to your LM-7000H-4TX module, please refer to the warranty statement provided with your purchase or visit the official Moxa webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.
8.2 Техникалык колдоо
If you encounter issues that cannot be resolved using the troubleshooting guide in this manual, or require further technical assistance, please contact Moxa technical support. You can find contact information and additional resources on the official Moxa webсайт.
- Moxa Webсайт: www.moxa.com
- Колдоо булактары: Product documentation, FAQs, and contact details for regional support centers are available online.
