Introduction
This manual provides comprehensive instructions for the SHARP Digital Alarm with AccuSet. This automatic smart clock is designed for ease of use, eliminating the need for manual time adjustments. Its clear, bright LED display and intuitive controls make it an ideal timekeeping solution for any room.
The SHARP Digital Alarm Clock seamlessly integrates into your bedroom decor.
Продукт өзгөчөлүктөрү
- AccuSet Automatic Time Set: Pre-programmed time for immediate use.
- Quick Daylight Savings Time (DST) Adjustment: Simple switch for time changes.
- High/Low Dimmer Control: Adjustable display brightness for comfort.
- Back up Battery: Pre-installed CR2032 battery maintains time settings during power outages.
- Убакыт алкагын тандоо: Easily select your local time zone.
Бүттүview of the SHARP Digital Alarm Clock's primary features.
Жайгашуу
- Саатты таңгактан чыгаруу: Саатты таңгагынан этияттык менен чыгарыңыз.
- Убакыт алкагын тандоо: Locate the time zone switch on the bottom of the clock. Select your appropriate time zone (EST, CST, MST, PST) before plugging in the unit.
- Плагин: Connect the power cord to an approved electrical outlet. The clock will automatically set to the correct time based on your time zone selection.
- Жайкы убакытты (DST) орнотуу: If applicable, slide the DST switch on the bottom of the clock to 'ON' to add one hour (+1 hr.) for Daylight Saving Time, or 'OFF' to subtract one hour (-1 hr.) for Standard Time.
The main unit of the SHARP Digital Alarm Clock, ready for setup.
Иштөө нускамалары
Ойготкучту орнотуу
The alarm function is controlled by buttons located on the top of the clock.
- Ойготкуч убактысын коюу: Press and hold the 'ALARM' button. While holding, press the 'HOUR' button to adjust the alarm hour and the 'MINUTE' button to adjust the alarm minute. Release the 'ALARM' button when finished.
- Сигналды иштетүү/өчүрүү: Press the 'ALARM ON/OFF' button to toggle the alarm function. An 'ALARM' indicator light on the front display will illuminate when the alarm is active.
- Чырым Function: When the alarm sounds, press the large 'SNOOZE' button on top to temporarily silence the alarm for a short period. The alarm will sound again after the snooze period ends.
Dimmer Control
Adjust the brightness of the LED display to your preference using the 'DIMMER HI/LO' switch located on the top left of the clock.
- Slide the switch to 'HI' for a brighter display.
- Slide the switch to 'LO' for a dimmer display, suitable for nighttime viewing.
Деталдаштырылган view of the top panel controls for time and alarm settings.
The clock's display with the dimmer function activated, showing reduced brightness.
Батареянын камдык көчүрмөсү
The clock includes a pre-installed CR2032 button cell battery. This battery is used to maintain the time settings in the event of a power interruption, ensuring that you do not need to reset the time when power is restored. The battery is located in a screw-secured compartment at the bottom of the clock and is designed to last for several years.
Батареяны алмаштыруу үчүн:
- Unplug the clock from the electrical outlet.
- Сааттын ылдый жагындагы батарея отсегин табыңыз.
- Unscrew the cover and remove the old CR2032 battery.
- Туура полярдуулукту камсыз кылуу менен жаңы CR2032 батареясын салыңыз.
- Replace the cover and screw it securely.
- Plug the clock back into the electrical outlet.
Техникалык шарттар
| Өзгөчөлүк | Description |
|---|---|
| Бренд | SHARP |
| Модел | B08TG8W2QD |
| Түс | Midnight Black-white Led |
| Дисплей түрү | Санарип |
| Өзгөчө өзгөчөлүк | Automatic Set |
| Продукциянын өлчөмдөрү | 5.5"W x 2.6"H |
| Power Source | Электр зымдары, аккумуляторлор |
| Камдык батарея | CR2032 (алдын ала орнотулган) |
| Элемент Салмагы | 10.2 унция (0.29 килограмм) |
| Frame Material | Пластик |
Physical dimensions of the alarm clock.
Проблемаларды чечүү
- Time Not Setting Automatically: Ensure the time zone switch on the bottom is correctly set for your region. Verify the clock is securely plugged into a working electrical outlet. The internal CR2032 battery is for backup and does not power the main display.
- Дисплей өтө жарык/күңүрт: Use the 'DIMMER HI/LO' switch on the top of the clock to adjust the display brightness to your preference.
- Ойготкуч угулбайт: Check that the 'ALARM ON/OFF' button has been pressed and the 'ALARM' indicator light on the front display is illuminated. Ensure the alarm time is correctly set.
- Time Reset After Power Outage: If the time resets after a power outage, the internal CR2032 backup battery may be depleted or improperly installed. Refer to the 'Battery Backup' section for replacement instructions.
Техникалык тейлөө
To ensure the longevity and optimal performance of your SHARP Digital Alarm Clock, follow these simple maintenance guidelines:
- Тазалоо: Wipe the clock's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Батареяны алмаштыруу: Replace the CR2032 backup battery every few years or if the clock fails to retain time during a power interruption. Refer to the 'Battery Backup' section for detailed instructions.
- Жайгашкан жери: Саатты туруктуу, тегиз жерге, күндүн түз нурунан, ашыкча ысыктан же нымдуулуктан алыс коюңуз.
Кепилдик жана колдоо
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official SHARP webсайт. Кепилдик талаптары үчүн сатып алуунун далили талап кылынышы мүмкүн болгондуктан, сатып алуу дүмүрчөгүңүздү сактап коюңуз.
