Autek IKEY820 Car Key Programmer User Manual

1. Киришүү

The Autek IKEY820 is a professional car key programming tool designed for locksmiths and automotive service professionals. This device facilitates various key-related operations, including reading PIN codes, adding new keys, erasing existing keys, and performing all-keys-lost programming for a wide range of vehicle makes and models. This manual provides detailed instructions for the proper setup, operation, and maintenance of your IKEY820 device.

2. Продукт бүтүп калдыview

2.1 Пакеттин мазмуну

Кутучаны ачканда, бардык компоненттердин бар экендигин текшериңиз:

Figure 1: Autek IKEY820 device, carrying case, main cable, USB cable, and OBDII connectors.

• Autek IKEY820 Main Unit
• Main Diagnostic Cable
• USB кабели
• OBDII Connectors (various types)
• Коргоочу куту

2.2 Негизги өзгөчөлүктөрү

Figure 2: ашыкview of Autek IKEY820 key features.

• Supports vehicle models up to 2017 (and newer for specific brands/functions).
• Provides roadside key remote programming for drivers.
• Programs proximity and non-proximity keys.
• Programs smart keys and flip keys.
• Supports programming of aftermarket and OEM keys.
• Reads immobilizer PIN codes from Engine ECU or Body Control Module.
• Reads pre-coded data from Engine ECU or Body Control Module.
• Reads and clears fault codes.
• Clears key memory.
• Professional car key programming for locksmiths, garages, and car body repair centers.

2.3 Түзмөктүн жайгашуусу

Figure 3: Labeled components of the Autek IKEY820 device.

• Fn ачкычы: Function key for specific operations.
• ESC ачкычы: Escape key to go back or cancel an operation.
• OK Ачкыч: Confirmation key.
• Up/Down/Left/Right Keys: Navigation buttons for menu selection.
• Main Cable Port: Connects the main diagnostic cable to the vehicle's OBDII port.
• USB порт: Жаңыртуулар же маалыматтарды өткөрүп берүү үчүн компьютерге туташуу үчүн.
• Электр порту: For external power supply if needed.

3. Орнотуу

1. Күйгүзүү: Connect the IKEY820 to the vehicle's OBDII port using the main diagnostic cable. The device will typically power on automatically. If not, ensure the vehicle's ignition is on (but not necessarily running).
2. Баштапкы жүктөө: Allow the device to boot up. The main menu will appear on the 4.3-inch screen.
3. Тил тандоо: If prompted, select your preferred language using the navigation keys and confirm with the OK key.
4. Системаны текшерүү: The device may perform a brief system check. Ensure no error messages are displayed.

4. Иштөө нускамалары

The IKEY820 operates through a menu-driven interface. Use the Up/Down/Left/Right keys to navigate and the OK key to confirm selections. The ESC key is used to return to the previous menu.

4.1 Программалоонун негизги функциялары

Figure 4: Autek IKEY820 displaying key programming options and settings menu.

• Read Pin Code: Access this function to retrieve the vehicle's immobilizer PIN code, which is often required for key programming.
• Add Keys Programming: Use this option to program new keys to the vehicle's immobilizer system. Follow the on-screen prompts carefully, which may include inserting keys, turning the ignition, or pressing remote buttons.
• Erase Keys: This function allows for the deletion of existing keys from the vehicle's memory. This is useful when a key is lost or stolen to prevent unauthorized access.
• All Keys Lost Programming: In situations where all vehicle keys are lost, this advanced function enables the programming of new keys from scratch. This process may require additional steps or specific vehicle data.

4.2 Specific Vehicle Functions

• Форд: Supports many models from 1999 to 2017. Escape and Focus models up to 2018 may not require a PIN code for programming keys, deleting keys, or all keys lost procedures.
• Мустанг: Supports many models from 1999 to 2017 for programming flip keys and smart keys.
• Chevrolet: Compatible with many models up to 2016 for reading passwords, adding keys, and all keys lost scenarios.
• GMC Юкон: Supports models up to 2016.
• Nissan: Up to 2018, includes PIN Code Calculator (20-digital PIN code, 5 to 4-digital PIN code), Glove code, ICU S/N, SEC S/N to PIN code.
• Jeep Cherokee and Renegade: Supports 5-digit PIN code reading and programming.
• Mitsubishi: Supports models up to 2019.

5. Автоунааны камтуу

The Autek IKEY820 offers extensive vehicle coverage across various regions:

Figure 5: Regional vehicle coverage for the Autek IKEY820.

6. Техникалык тейлөө

• Тазалоо: Түзмөктү тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Сактагыч: Store the IKEY820 in its protective carrying case in a cool, dry place when not in use.
• Программалык камсыздоо жаңыртуулары: Regularly check for software updates to ensure optimal performance and expanded vehicle coverage. Updates can typically be performed via the USB port by connecting to a computer and using the manufacturer's update tool. The device's settings menu includes an option for "UPDATE HW" (Hardware Update), which may refer to firmware updates.
• Кабельге кам көрүү: Inspect diagnostic cables for damage before each use. Replace any frayed or damaged cables immediately.

7. Кыйынчылыктарды

• Түзмөк күйбөй жатат:
  • Ensure the diagnostic cable is securely connected to the vehicle's OBDII port.
  • Унаанын от алдыруу системасы күйүк экенин текшериңиз.
  • Унаанын аккумуляторунун көлөмүн текшериңизtage.
  • If available, try connecting an external power supply to the device's power port.
• Байланыш каталары:
  • Ensure the diagnostic cable is correctly connected to both the IKEY820 and the vehicle.
  • Унаанын от алдыруу системасы күйүк экенин текшериңиз.
  • Check for any blown fuses in the vehicle's OBDII circuit.
  • Try another vehicle to rule out a device issue.
• Негизги программалоодогу ката:
  • Double-check that the correct vehicle make, model, and year have been selected.
  • Ensure the PIN code (if required) is correct.
  • Экрандагы бардык көрсөтмөлөрдү так аткарыңыз.
  • Verify the new key transponder is compatible with the vehicle.
  • Ensure the vehicle's battery is adequately charged during the programming process.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact Autek customer service directly. Keep your purchase receipt and product serial number handy when contacting support.