1. Продукт бүтүп калдыview
The AK Interactive Fine Metal Primer is a high-quality spray product with a grey tone, specifically formulated for priming metal parts. It offers high opacity once dry and can be applied directly over metal surfaces. This primer is ultra-resistant and provides excellent adherence, making it ideal for model building and hobby applications.
Image: AK Interactive Fine Metal Primer Spray Can (150ml). The can features the AK Interactive logo, 'FINE METAL PRIMER' text, and the product code 'AK1016'.
2. Коопсуздук чаралары
Always prioritize safety when working with aerosol products. Read and understand all warnings on the product label before use.
- Вентиляция: Use in a well-ventilated area. Avoid breathing vapors. If working indoors, ensure adequate airflow or use a respirator.
- Тутануучулук: This product is flammable. Keep away from heat, sparks, open flames, and hot surfaces. Do not smoke during application.
- Көздү коргоо: Wear appropriate eye protection (e.g., safety glasses or goggles) to prevent accidental spray contact.
- Терини коргоо: Wear gloves to prevent prolonged or repeated skin contact. Wash hands thoroughly after handling.
- Сактагыч: Store in a cool, dry place, away from direct sunlight and extreme temperatures. Keep out of reach of children and pets.
- Жоюу: Dispose of empty cans and any unused product according to local regulations. Do not puncture or incinerate cans, even when empty.
3. Даярдоо
Proper preparation ensures optimal adhesion and finish.
- Таза бети: Thoroughly clean and degrease the metal parts to be painted. Any dirt, oil, or residue can compromise primer adhesion.
- Иш чөйрөсү: Ensure your work area is clean, well-lit, and well-ventilated. Protect surrounding surfaces from overspray using drop cloths or newspaper.
- Температура: Apply in a moderate temperature environment, ideally between 15°C and 25°C (59°F and 77°F), and avoid high humidity.
4. Колдонуу боюнча нускамалар
4.1. Колдонуудан мурун
- Жакшы чайкагыла: Before each use, shake the spray can vigorously for at least one minute after the mixing ball begins to rattle. This ensures a good mixture of the paint components.
4.2. Колдонмо
- Позициялоо: Hold the can in a vertical position during application.
- Аралык: Maintain a distance of approximately 25 cm (10 inches) from the surface you are priming.
- Coats: Apply the primer in fast, thin, and even coats. Avoid applying a thick single coat, as this can lead to drips or an uneven finish.
- Кургатуу убактысы: Allow approximately 5 minutes of drying time between layers. This allows the previous coat to flash off and prevents solvent trapping.
- Айыктыруу: The synthetic lacquer cures in a short period of time, providing a durable base for subsequent paint layers. Full cure time is approximately 5 minutes per layer.
5. Колдонуудан кийинки кам көрүү
- Clear Nozzle: To prevent the diffuser from becoming obstructed, turn the can upside down immediately after painting. Hold the spray nozzle down for a few seconds until only clear gas emerges. This clears any remaining paint from the nozzle.
- Сактагыч: Store the can upright in a cool, dry, and well-ventilated area, away from direct sunlight and freezing temperatures. Ensure the cap is securely placed.
6. Кыйынчылыктарды
6.1. Clogged Nozzle
- Белги: Paint does not spray, or sprays unevenly.
- Чечим: Ensure you have followed the post-application care step (clearing the nozzle by inverting the can and spraying). If the nozzle is still clogged, you may attempt to carefully clean it with a thin wire or replace the nozzle if a spare is available.
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | AK Interactive |
| Модель номери | AK1016 |
| Түс | Боз |
| Аяктоо түрү | Мт |
| Элементтин көлөмү | 150 миллилитр |
| Бирдик саны | 5.07 Суюк унция |
| Боёк түрү | Spray |
| Өзгөчө колдонуулар | Interior/Exterior (for models) |
| Surface Recommendation | Металл |
| Элемент формасы | Аэрозоль |
| Толук айыктыруу убактысы | 5 Minutes (per layer) |
| Сууга туруктуулук деңгээли | Сууга чыдамдуу |
| UPC | 689358638525 |
8. Кепилдик маалыматы
AK Interactive products are manufactured to high standards. For specific warranty details regarding this product, please refer to the product packaging or visit the official AK Interactive webсайт. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.
9. Кардарларды колдоо кызматы
For further assistance, technical questions, or support regarding the AK Interactive Fine Metal Primer, please contact AK Interactive customer service through their official website or authorized distributors. Provide the product model number (AK1016) when seeking support.
