Einhell GC-CG 18/1 Li Cordless Grass and Shrub Shears User Manual

1. Киришүү

Thank you for choosing the Einhell GC-CG 18/1 Li Cordless Grass and Shrub Shears. This versatile tool is designed for precise trimming of grass edges and shaping of small shrubs, offering cordless freedom and ease of use. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read these instructions carefully before first use and keep them for future reference.

2. Жалпы коопсуздук нускамалары

Always observe the following safety precautions when operating the device:

• Колдонмону окуу: Иштетүүдөн мурун бардык көрсөтмөлөр жана эскертүүлөр менен таанышып чыгыңыз.
• Жеке коргонуу каражаттары: Always wear appropriate eye protection, gloves, and sturdy footwear.
• Иш чөйрөсү: Keep the work area clean and well-lit. Remove all obstacles and ensure no bystanders, especially children or pets, are nearby.
• Батареянын коопсуздугу: Use only recommended battery packs and chargers. Do not expose batteries to heat or fire.
• Кокусунан баштоодон качыңыз: Ensure the switch is in the off-position before inserting the battery pack, picking up, or carrying the appliance.
• Бычактарды тейлөө: Keep cutting blades sharp and clean for best performance and to reduce the risk of injury.
• Колдонуудан мурун текшерүү: Check the device for damage or loose parts before each use. Do not operate if damaged.
• Сактагыч: Store the device in a dry, secure place, out of reach of children, when not in use.

3. Продукт бүтүп калдыview

The Einhell GC-CG 18/1 Li is a powerful and ergonomic tool designed for efficient garden maintenance. Key features include:

• Part of the Power X-Change battery system, allowing battery interchangeability with other Einhell tools.
• Equipped with durable metal gearing for extended service life.
• Laser-cut and diamond-sharpened blades ensure precise and clean cuts for both grass and shrubs.
• Features a soft grip handle for comfortable and secure handling during operation.
• Designed for easy trimming of grass around edges and corners.

1-сүрөт: Einhell GC-CG 18/1 Li Cordless Grass and Shrub Shears. The image displays the red and black tool with its grass cutting blade attachment and an outline indicating where the Power X-Change battery pack (not included) is inserted at the rear handle.

4. Орнотуу

4.1. Батареяны орнотуу

1. Аппараттын өчүрүлгөнүн текшериңиз.
2. Insert a charged Einhell Power X-Change 18V battery pack into the battery receptacle at the rear of the handle until it clicks securely into place.
3. To remove the battery, press the release button on the battery pack and pull it out.

Эскертүү: Батарея жана заряддоочу түзүлүш бул продукт менен кошо берилбейт жана аларды өзүнчө сатып алуу керек.

4.2. Бычак тиркеме

1. Ensure the device is switched off and the battery is removed.
2. To attach the grass cutting blade (pre-installed or for replacement): Align the blade assembly with the gear housing and push it firmly until it locks into position.
3. To remove the blade: Locate the blade release button/lever (refer to specific diagrams in the full manual if available) and press it while pulling the blade assembly away from the device.
4. Always handle blades with care, wearing protective gloves.

5. Иштөө нускамалары

5.1. Баштоо жана токтотуу

1. To start the device, first press the safety lock button, then press the ON/OFF switch.
2. To stop the device, release the ON/OFF switch. The safety lock automatically resets.

5.2. Колдонуу боюнча кеңештер

• Grass Trimming: Hold the device at a slight angle to the ground and move it steadily along the grass edges. The 10 cm cutting width is ideal for precise work.
• Shrub Shaping: For shrub trimming (if shrub shear blade is attached), use smooth, sweeping motions. Avoid cutting branches thicker than recommended for the blade.
• Оптималдуу аткаруу: For best results, use the tool on dry grass and shrubs. Wet material can clog the blades and reduce cutting efficiency.
• Коопсуздук кулпу: The integrated safety lock prevents unintentional activation, enhancing user safety.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and safe operation of your Einhell GC-CG 18/1 Li.

• Тазалоо: After each use, remove the battery and clean the blades and housing with a brush or cloth. Do not use water or harsh chemicals.
• Бычакты багуу: Periodically apply a light machine oil to the blades to prevent rust and ensure smooth operation. If blades become dull, they can be sharpened or replaced.
• Сактагыч: Store the device in a dry, frost-free location, out of reach of children. Ensure the blades are protected, for example, with a blade cover.
• Батареяны сактоо: Store battery packs in a cool, dry place, partially charged (around 50%) if storing for extended periods.

7. Кыйынчылыктарды

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official Einhell webсайт. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.

Einhell Official Webсайт: www.einhell.com