1. Киришүү
The Sharkoon RGB SLIDER WT is a versatile mid-tower PC case designed for optimal functionality and aesthetic appeal. It features an integrated RGB LED strip on the front panel, offering customizable lighting effects. The case supports various component configurations, including multiple cooling fan options and extensive storage capabilities. A tempered glass side panel provides a clear view ички компоненттеринин.

Сүрөт 1.1: алдыңкы жагы view of the Sharkoon RGB SLIDER WT PC Case, showcasing the RGB LED strip and tempered glass side panel.
2. Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- Sharkoon RGB SLIDER WT PC Case
- 1x 120mm Rear Fan (pre-installed)
- Accessory Box (containing screws, cable ties, and this manual)
3. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Өлчөмдөрү (L x W x Y) | 40 x 19 x 45.6 см |
| Салмагы | 6 кг |
| Иштин түрү | Миди мунарасы |
| Каптал панелинин материалы | Температуралуу айнек |
| Муздатуу ыкмасы | Аба муздатуу |
| Алдыңкы I / O порттору | 2x USB 3.0, 1x USB 2.0, Аудио киргизүү/чыгаруу |
| Drive Bays | 2x 3.5" HDD, 5x 2.5" SSD (2 shared with 3.5") |
| Максималдуу GPU узундугу | 335mm (without front fans) |
| CPU муздаткычтын максималдуу бийиктиги | 157мм |
| Максималдуу PSU узундугу | 175мм |
| Алдын ала орнотулган күйөрмандар | 1x 120 мм арткы желдеткич |
| Күйөрмандарды колдоо (алдыңкы) | 3х 120мм |
| Күйөрмандарды колдоо (жогорку) | 2x 120mm же 2x 140mm |
| Желдетүүчү колдоо (арткы) | 1х 120мм |

Image 3.1: Diagram illustrating the dimensions of the Sharkoon RGB SLIDER WT PC Case.
4. Орнотуу жана орнотуу
4.1. Даярдоо
Before beginning installation, ensure the PC case is placed on a stable, flat surface. Unpack all components and verify against the package contents list. It is recommended to wear an anti-static wrist strap to prevent damage to sensitive electronic components.
4.2. Motherboard орнотуу
- Install the I/O shield into the designated slot at the rear of the case.
- Align the motherboard with the standoffs inside the case. Ensure the I/O ports align with the I/O shield.
- Берилген бурамалар менен энелик тактаны бекитиңиз.

Сүрөт 4.1: Интерьер view of the PC case, showing the motherboard mounting area and pre-installed rear fan.
4.3. Электр менен камсыздоо блогун (PSU) орнотуу
- Locate the PSU tunnel at the bottom rear of the case.
- Slide the PSU into the tunnel from the rear of the case, ensuring the fan faces downwards (if applicable, for bottom intake).
- PSUну корпустун артындагы бурамалар менен бекитиңиз.
4.4. Сактагыч түзмөктү орнотуу
The case supports 3.5" HDDs and 2.5" SSDs.
- 3.5" HDD: Install into the drive cage located within the PSU tunnel.
- 2.5" SSD: Mount onto the dedicated SSD trays behind the motherboard tray or on top of the PSU tunnel.

Image 4.2: Rear interior view, highlighting cable management options and locations for 2.5" SSDs and 3.5" HDD cage.
4.5. Expansion Card Installation (e.g., GPU)
- Керектүү PCIe уячасынын капкактарын корпустун арткы бөлүгүнөн алып салыңыз.
- Insert the expansion card into the corresponding PCIe slot on the motherboard.
- Картаны бурамалар менен бекитиңиз.
4.6. Fan Installation (Optional)
Additional fans can be installed at the front and top of the case.
- Алдыңкы күйөрмандар: Remove the front panel to access the mounting points for up to three 120mm fans.
- Мыкты күйөрмандар: Mount up to two 120mm or 140mm fans to the top panel.
4.7. Кабелдик башкаруу
Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and maintains a clean interior aesthetic.
5. Иштөө нускамалары
5.1. Күйгүзүү
After all components are installed and cables connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the top panel of the case to start your system.

Сүрөт 5.1: Жогорку view of the case, detailing the front I/O panel with USB ports and audio jacks.
5.2. RGB жарыкты башкаруу
The front RGB LED strip can be controlled in two ways:
- Built-in Controller: Use the dedicated RGB control button on the top panel to cycle through 14 preset lighting modes.
- Motherboard ARGB Sync: Connect the RGB cable from the case to a compatible 3-pin 5V ARGB header on your motherboard. The lighting can then be controlled via motherboard software (e.g., Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, ASRock Polychrome SYNC).
5.3. Front Panel Ports
The front I/O panel provides convenient access to:
- 2x USB 3.0 ports for high-speed data transfer.
- 1x USB 2.0 port for general peripherals.
- Audio In (microphone) and Audio Out (headphone) jacks.
6. Техникалык тейлөө
6.1. Тазалоо
- Сырткы: Сырткы беттерин жумшак менен сүртүңүз, гamp кездеме. Абразивдүү тазалагычтардан алыс болуңуз.
- Чаң чыпкалары: Regularly remove and clean the dust filters (e.g., top magnetic filter, bottom PSU filter) to maintain optimal airflow and prevent dust buildup inside the case.
- Ички иштер: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning the interior.
6.2. Аба агымы
Ensure that the case has adequate clearance around it for proper airflow. Avoid blocking intake or exhaust vents. Regularly check fan operation to ensure they are spinning correctly.
7. Кыйынчылыктарды
7.1. Система күйбөй жатат
- Кубат кабели PSUга да, розеткага да бекем туташтырылганын текшериңиз.
- Ensure the PSU's power switch is in the 'ON' position.
- Check that the front panel power button cable is correctly connected to the motherboard's front panel header.
- Confirm all internal power connections (24-pin ATX, CPU power, GPU power) are secure.
7.2. Вентиляторлор айланбай жатат
- Желдеткичтин кубаттуулук туташууларын энелик платага же желдеткич контроллерине текшериңиз.
- Ensure fan headers are enabled in the motherboard BIOS/UEFI settings.
7.3. RGB жарыктандыруу иштебей жатат
- If using the built-in controller, press the RGB button to cycle modes.
- If using motherboard sync, ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 4-pin 12V RGB).
- Verify that the motherboard's RGB software is installed and configured correctly.
7.4. Front Panel USB/Audio Ports Not Functioning
- Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on the motherboard.
- Ensure motherboard drivers are installed.
8. Кепилдик жана колдоо
Sharkoon products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon website. For technical support, product inquiries, or service requests, please contact Sharkoon customer support through their official channels.
For further assistance, please visit the official Sharkoon webсайт: www.sharkoon.com





