MTX электрондук вернье штангенциркулятору (316119 модели, 150 мм) колдонуучунун колдонмосу

1. Киришүү

This manual provides instructions for the proper use and maintenance of your MTX Electronic Vernier Caliper, Model 316119. This precision measuring instrument is designed for accurate internal, external, depth, and step measurements up to 150mm.

Constructed from durable tool stainless steel, the caliper features a clear LCD display for easy reading of measurements. Its robust design ensures longevity and resistance to rust, while its compact size makes it highly portable.

1-сүрөт: Жалпысынан view of the MTX Electronic Vernier Caliper.

2. Продукциянын компоненттери

Familiarize yourself with the main components of the electronic vernier caliper:

• External Jaws: Тышкы өлчөмдөрдү өлчөө үчүн колдонулат.
• Internal Jaws: Ички өлчөмдөрдү өлчөө үчүн колдонулат.
• Тереңдик таякчасы: Used for measuring depths.
• Main Scale: Graduated scale for reference.
• Sliding Jaw: Moves along the main scale.
• Thumb Roller: For fine adjustment of the sliding jaw.
• Бекитүү бурагы: To fix the sliding jaw in position.
• LCD дисплей: Digital readout of measurements.
• ON/OFF баскычы: Powers the caliper on or off.
• ZERO баскычы: Дисплейди каалаган абалда нөлгө коёт.
• mm/inch Button: Switches between metric (mm) and imperial (inch) units.

Figure 2: Key components of the electronic vernier caliper.

3. Орнотуу жана Батареяны орнотуу

3.1 Батареяны орнотуу

The caliper requires one 1.5V SR44 type battery. To install or replace the battery:

1. LCD дисплейдин арткы бетиндеги батарея бөлүмүнүн капкагын табыңыз.
2. Капкакты жылдырыңыз.
3. Insert the SR44 battery with the positive (+) side facing upwards.
4. Батарея уясынын капкагын бекем жабыңыз.

3.2 Алгачкы тазалоо

Before first use, gently wipe the measuring surfaces with a clean, dry, lint-free cloth to remove any protective oils or dust.

4. Негизги операция

4.1 Күйгүзүү/өчүрүү

• басыңыз КҮЙГҮЗҮҮ/ӨЧҮРҮҮ button to turn the caliper on.
• басыңыз КҮЙГҮЗҮҮ/ӨЧҮРҮҮ button again to turn the caliper off. The caliper may also automatically shut off after a period of inactivity to conserve battery.

4.2 Дисплейди нөлгө салуу

For accurate measurements, it is crucial to zero the caliper before use:

1. Close the external jaws completely, ensuring they are clean and free of debris.
2. басыңыз НӨЛ button. The display should now read 0.00mm or 0.000in.
3. The caliper is now ready for measurement.

4.3 Unit Conversion (mm/inch)

басыңыз мм/дюйм button to switch between metric (millimeters) and imperial (inches) units at any time during measurement.

Figure 3: Caliper display showing a measurement in millimeters.

5. Measurement Techniques

Always ensure the caliper is clean and zeroed before taking measurements.

5.1 External Measurement

To measure the external dimension of an object:

1. Open the external jaws wider than the object.
2. Place the object between the external jaws.
3. Use the thumb roller to gently close the jaws until they make firm contact with the object. Do not apply excessive force.
4. LCD дисплейиндеги өлчөөнү окуп чыгыңыз.

Figure 4: Measuring an external dimension.

5.2 Internal Measurement

To measure the internal dimension of an object (e.g., a hole or groove):

1. Insert the internal jaws into the opening.
2. Use the thumb roller to gently open the jaws until they make firm contact with the internal surfaces.
3. LCD дисплейиндеги өлчөөнү окуп чыгыңыз.

Figure 5: Measuring an internal dimension.

5.3 Depth Measurement

To measure the depth of a hole or step:

1. Place the end of the main scale firmly on the top surface of the object.
2. Extend the depth rod into the hole or down to the step until it touches the bottom.
3. LCD дисплейиндеги өлчөөнү окуп чыгыңыз.

6. Техникалык тейлөө жана сактоо

Proper care will ensure the longevity and accuracy of your caliper.

• Тазалоо: After each use, wipe the caliper clean with a dry, soft cloth. Avoid using solvents or harsh chemicals, as these can damage the display or measuring surfaces.
• Батареяга кам көрүү: If the caliper will not be used for an extended period, remove the battery to prevent leakage and damage.
• Сактагыч: Store the caliper in its original plastic case with foam insert to protect it from impacts, dust, and moisture. Keep it in a dry environment away from direct sunlight and extreme temperatures.
• Зыяндан качуу: Do not drop the caliper or subject it to strong impacts. Avoid scratching the measuring surfaces.

7. Кыйынчылыктарды

If you encounter issues with your caliper, refer to the following common problems and solutions:

• Дисплей бош же жыпылыктап турат:
  Чечим: Check the battery. Replace with a new 1.5V SR44 battery if necessary. Ensure the battery is inserted correctly.
• Туура эмес окуулар:
  Чечим: Ensure the measuring surfaces are clean and free of debris. Close the jaws completely and press the НӨЛ button to re-zero the caliper. Avoid applying excessive force during measurement.
• Sliding jaw movement is stiff:
  Чечим: Clean the main beam and sliding surfaces with a dry, lint-free cloth. A very small amount of light machine oil can be applied to the main beam, then wiped clean to leave a thin film.

8. Техникалык шарттар