1. Киришүү
The TSC TE200 is a versatile 4-inch thermal transfer desktop barcode and label printer designed for a wide range of applications, from shipping labels to product identification. This manual provides essential information for setting up, operating, and maintaining your TE200 printer to ensure optimal performance and longevity.
Figure 1: The TSC TE200 4 Inch Barcode and Label Printer in operation, printing a label.
2. Пакеттин мазмуну
Before proceeding with the setup, please verify that all items listed below are included in your package. If any items are missing or damaged, contact your vendor immediately.
- TSC TE200 Barcode and Label Printer
- Кубат адаптери жана электр шнуры
- USB кабели
- Label Roll Spindle and Holders (green components)
- Ыкчам баштоо колдонмосу / Колдонуучунун колдонмосу (бул документ)
- Driver CD (may vary by region/package)
Figure 2: Included accessories for the TSC TE200 printer, including power supply, cables, and label roll components.
3. Орнотуу
3.1 Пакеттен чыгаруу жана жайгаштыруу
Carefully remove the printer from its packaging. Place the printer on a stable, flat surface with adequate ventilation. Ensure there is enough space around the printer for opening covers and accessing ports.
3.2 Медиа файлдарды жүктөө (этикеткалар)
- Open the top cover of the printer by pulling the release latches on both sides.
- Insert the label roll onto the media supply spindle, ensuring the labels feed from the bottom of the roll.
- Place the spindle with the label roll into the media compartment.
- Pull the leading edge of the labels forward, under the media guides, until it extends past the print head.
- Adjust the media guides to fit the width of your labels snugly, without pinching them.
- Close the top cover firmly until it latches.
Figure 3: The TSC TE200 printer with its top cover open, showing the internal mechanism for loading a label roll.
3.3 Кубатты туташтыруу
Connect the power adapter to the printer's power port, then plug the power cord into the adapter and a suitable electrical outlet. The power LED on the printer should illuminate.
3.4 Connecting to Computer and Driver Installation
Connect the USB cable from the printer's USB port to an available USB port on your computer. Insert the provided driver CD into your computer's CD-ROM drive and follow the on-screen instructions to install the printer drivers. If you do not have a CD-ROM drive, drivers can typically be downloaded from the official TSC webсайт.
4. Принтерди иштетүү
4.1 Негизги басып чыгаруу
Once the printer drivers are installed and the printer is connected and powered on, you can begin printing. Use your preferred label design software or application to create your labels. Ensure the printer is selected as the output device in your software's print settings.
4.2 Принтерди калибрлөө
For accurate label printing, it is often necessary to calibrate the printer to the specific size and type of labels you are using. Refer to the printer's software utility or the advanced settings in your printer preferences for calibration options. This process typically involves the printer feeding a few blank labels to detect the label gaps or black marks.
5. Техникалык тейлөө
Regular maintenance ensures consistent print quality and extends the life of your printer. Always turn off and unplug the printer before performing any cleaning or maintenance.
5.1 Басып чыгаруу башын тазалоо
The print head should be cleaned regularly, especially if print quality degrades or lines appear on labels. Use a lint-free cloth or a print head cleaning pen moistened with isopropyl alcohol. Gently wipe across the print head surface. Allow it to dry completely before closing the cover and powering on.
5.2 Плита ролигин тазалоо
The platen roller (the rubber roller that feeds the labels) can accumulate dust and adhesive residue. Clean it with a lint-free cloth moistened with isopropyl alcohol. Rotate the roller manually to clean its entire surface.
6. Кыйынчылыктарды
This section addresses common issues you might encounter with your TSC TE200 printer.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Күч жок | Электр зымы туташкан эмес; розетка туура эмес. | Электр шнурунун бекем туташтырылганын текшериңиз. Башка электр розеткасын колдонуп көрүңүз. |
| No Print / Blank Labels | Labels loaded incorrectly; Print head dirty; Incorrect driver settings. | Verify label loading direction. Clean the print head. Check printer settings in your software/driver. |
| Poor Print Quality / Faded Print | Print head dirty; Incorrect darkness setting; Worn print head. | Clean the print head. Adjust print darkness setting in driver. If issue persists, print head may need replacement. |
| Кагаз Jam | Media guides too tight; Labels curlжыртылган же бузулган. | Open cover, remove jammed labels carefully. Adjust media guides. Use fresh, flat labels. |
7. Техникалык шарттар
Key technical specifications for the TSC TE200 4 Inch Barcode and Label Printer:
- Модель аты: TE200
- Басып чыгаруу технологиясы: Термикалык
- Принтердин чыгышы: Монохромдуу
- Байланыш технологиясы: USB
- Максималдуу медиа өлчөмү: 4 дюйм
- Элемент Салмагы: 2.4 килограмм
- Түсү: Кара
- Шайкеш түзмөктөр: Ноутбуктар
- Камтылган компоненттер: Labels, Power Cable, Manual
- Пакеттин өлчөмдөрү: 11 x 8 x 6 см
8. Кепилдик жана колдоо
For information regarding the product warranty, please refer to the warranty card included with your printer or visit the official TSC website. For technical support, driver downloads, or further assistance, please contact TSC customer service or your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.
Note: Extended warranty plans may be available from third-party providers, but these are separate from the manufacturer's standard warranty.
