Карсон 500501007

Carson FS Reflex Stick II 2.4GHz 6-Channel Radio Control System User Manual

Модель: 500501007

Introduction

This manual provides detailed instructions for the Carson FS Reflex Stick II 2.4GHz 6-channel radio control system. This high-quality, modern remote control is designed for universal use with various RC vehicles and ships. It features 6 independently controllable channels, making it compatible with TAMIYA MF and DMD units. Please read this manual thoroughly before operating the device to ensure safe and correct usage.

Коопсуздук нускамалары

Пакеттин мазмуну

Таңгактан чыгаргандан кийин, бардык компоненттер бар экенин жана бузулбаганын текшериңиз:

Note: AA batteries for the transmitter are not included and must be purchased separately.

Продукт бүттүview

The Carson FS Reflex Stick II transmitter features a robust design with a carbon look. It includes two control sticks for primary functions and additional buttons/switches for auxiliary channels.

Carson FS Reflex Stick II 2.4GHz 6-Channel Transmitter

1-сүрөт: Фронт view of the Carson FS Reflex Stick II 2.4GHz 6-Channel Transmitter. This image shows the overall layout of the transmitter, including the two main control sticks, the 2.4GHz antenna, and the various switches and buttons for channel control.

Өткөргүчтүн компоненттери:

Close-up of 6-channel switch on Carson FS Reflex Stick II transmitter

2-сүрөт: Жакын план view of an auxiliary 6-channel switch on the Carson FS Reflex Stick II transmitter. This image highlights one of the toggle switches used for controlling additional functions on your RC model.

Жайгашуу

1. Батареяны орнотуу (өткөргүч)

  1. Өткөргүчтүн артындагы батарея бөлүкчөсүнүн капкагын ачыңыз.
  2. Туура полярдуулукту (+/-) камсыз кылып, 4 жаңы AA батарейкасын салыңыз.
  3. Батарея уясынын капкагын бекем жабыңыз.

2. Receiver Connection

Connect the receiver to your RC model's electronic speed controller (ESC) and servos according to your model's specific instructions. Ensure all connections are firm and correctly oriented.

3. Өткөргүчтү жана кабыл алгычты байланыштыруу

The transmitter and receiver are usually pre-bound from the factory. If re-binding is necessary:

  1. Ensure the transmitter is turned OFF.
  2. Connect the bind plug (not included, usually comes with receiver or ESC) to the BIND/VCC port on the receiver.
  3. Кабылдагычты күйгүзүңүз. Кабылдагычтын LED индикатору тез күйүп-өчүшү керек.
  4. Press and hold the BIND button on the transmitter while turning it ON.
  5. Release the BIND button after a few seconds. The receiver's LED should now be solid, indicating a successful bind.
  6. Turn off the receiver, then the transmitter. Remove the bind plug from the receiver.
  7. Restart the system (transmitter ON first, then receiver) to confirm the bind.

Иштөө нускамалары

1. Күйгүзүү / Өчүрүү

2. Basic Control Functions

3. Auxiliary Channel Control

The two additional switches (one push-button, one toggle switch) control channels 5 and 6. These are typically used for non-proportional functions:

4. Servo Reverse

If a servo moves in the opposite direction to your stick input, use the corresponding servo reverse switch on the transmitter to correct its direction. There is a servo reverse switch for each channel.

Техникалык тейлөө

Тазалоо

Сактагыч

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Өткөргүчкө кубат жокӨлүк же туура эмес орнотулган батарейкалар.Туура полярдуулукту камсыз кылуу менен батарейкаларды жаңы AA батарейкалары менен алмаштырыңыз.
No control response from modelӨткөргүч жана кабыл алгыч туташкан эмес; кабыл алгыч электр кубаты менен жабдылган эмес; туура эмес туташуулар.Perform binding procedure; check receiver power supply; verify all connections.
Servo moves in wrong directionIncorrect servo direction setting.Adjust the corresponding servo reverse switch on the transmitter.
Limited range or intermittent controlLow transmitter/receiver battery; interference; damaged antenna.Replace batteries; operate in an open area away from other 2.4GHz devices; check antennas for damage.

Техникалык шарттар

Кепилдик жана колдоо

For warranty information or technical support, please refer to the official Carson webсайтка же сатуучуга кайрылыңыз. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

Тектеш документтер - 500501007

Preview CARSON Reflex Stick Multi Pro 14 Channel 2.4 GHz FHSS Радио башкаруу тутуму Колдонуучунун колдонмосу
CARSON Reflex Stick Multi Pro 14 Channel 2.4 GHz FHSS Санарип Пропорционалдуу Радио Башкаруу системасы үчүн комплекстүү колдонуучу колдонмосу. Орнотуу, иштетүү, коопсуздук, кепилдик жана техникалык мүнөздөмөлөрдү камтыйт.
Preview Carson RC Akuma өткөргүчү: Иштетүү жана көйгөйлөрдү чечүү боюнча колдонмо
Carson RC Akuma алыстан башкаруучу өткөргүчүн иштетүү жана мүчүлүштүктөрдү оңдоо боюнча кеңири колдонмо, анын ичинде орнотуу, байланыштыруу, батареяны орнотуу жана жалпы иштөө көйгөйлөрү.
Preview CARSON MM-350 MicroBrite Plus LED жарыктуу чөнтөк микроскобу, адаптер клиби менен Колдонуучунун колдонмосу
CARSON MM-350 MicroBrite Plus LED жарыктуу чөнтөк микроскобу үчүн инструкциялар жана спецификациялар, анын ичинде орнотуу, колдонуу жана коопсуздук эскертүүлөрү.
Preview Carson Linde H40D Radio Controlled Forklift - Instruction Manual
Comprehensive user manual for the Carson Linde H40D radio-controlled forklift. Includes setup, operation, safety instructions, troubleshooting, and technical specifications.
Preview Карсон MM-310 MicroBrite Plus Смартфон Адаптери Клип Колдонуучунун колдонмосу
Карсон MM-310 MicroBrite Plus смартфондун адаптер клипи үчүн нускамалар жана спецификациялар, смартфонду чоңойтулган фото жана видеография үчүн Карсон микроскоптору менен колдонууга мүмкүндүк берет.
Preview CARSON CL-65 MagniFlex LED Lighted ийкемдүү-кол лупа колдонуучунун көрсөтмөсү
CARSON CL-65 MagniFlex LED жарыктуу ийкемдүү кол лупа үчүн нускамалар жана спецификациялар, анын ичинде батарейканы орнотуу, C-clamp тиркеме жана DC адаптерин колдонуу.