Introduction
This manual provides detailed instructions for the operation and maintenance of your mooas MC-M3 Digital Mirror LED Alarm Clock. This device features a large LED display, dual alarm functionality, adjustable brightness, temperature and humidity display, and a convenient USB charging port.
Сүрөт: бүттүview of the mooas MC-M3 Digital Mirror LED Alarm Clock, showcasing its design and available colors (Mint, Dark Gray, White).
Пакеттин мазмуну
- mooas MC-M3 Digital Mirror LED Alarm Clock
- USB Cable (1.2A)
- User Manual
Жайгашуу
Аппаратты кубаттандыруу
The mooas MC-M3 clock can be powered via a USB cable or AAA batteries. For continuous display of the LED, the clock must be connected to a USB power source.
- USB Power: Connect the provided USB cable to the DC 5V power terminal on the back of the clock and plug the other end into a USB power adapter (not included) or a powered USB port.
- Батарея кубаттуулугу: Insert 3 AAA batteries (not included) into the battery compartment on the back of the clock. When operating on battery power, the LED display will only light up for 10 seconds after a button press to conserve energy.
Image: Rear panel of the clock, highlighting the battery cover, power input, and USB charging port.
Иштөө нускамалары
Control Buttons Overview
The clock features intuitive touch sensor buttons on the top panel and a rolling button on the side for brightness control.
Image: Top panel of the clock with touch sensor buttons clearly visible.
Убакыт жана дата орнотуу
- басып, кармап туруңуз Убакыт button (clock icon) on the top panel until the time display flashes.
- колдонуу + жана - саатты тууралоо үчүн баскычтар.
- басыңыз Убакыт button again to move to minute setting, then use + жана - тууралоо.
- Баскычын баса бериңиз Убакыт button to cycle through year, month, and day settings, adjusting each with + жана -.
- басыңыз Убакыт button one last time to confirm and exit time/date setting.
Setting Alarms (Dual Alarms)
- басып, кармап туруңуз Ойготкуч button (bell icon) on the top panel until the alarm time display flashes. The alarm indicator (1 or 2) will also flash.
- колдонуу + жана - ойготкуч саатын тууралоо үчүн баскычтар.
- басыңыз Ойготкуч button again to move to minute setting, then use + жана - тууралоо.
- басыңыз Ойготкуч button again to set the second alarm, repeating steps 2 and 3.
- басыңыз Ойготкуч button one last time to confirm and exit alarm setting.
Ойготкучту иштетүү же өчүрүү үчүн, баскычын кыска басыңыз Ойготкуч button. The corresponding alarm indicator (1 or 2) will appear or disappear on the display.
Сүрөт: деталдуу view of the display, indicating time, alarm status, humidity, and temperature.
Тындырма функциясы
Ойготкуч чыкканда, басыңыз Тындыр button (Zz icon) on the top panel to activate the snooze function. The alarm will temporarily stop and sound again after a set interval. If no buttons are pressed when the alarm rings, it will automatically sound at the same time the next day.
Жарыктыкты жөндөө
Adjust the LED display brightness using the orange rolling button located on the upper right side of the clock. Roll the button up or down to increase or decrease brightness. This allows for fine-tuned adjustment to suit various lighting conditions, including dimming for nighttime use.
Image: The rolling button for detailed brightness control.
12/24 Hour Mode and Temperature Units
To switch between 12-hour and 24-hour time formats, or between Celsius (°C) and Fahrenheit (°F) for temperature display, short press the Mode button (sun/moon icon with Zz) on the top panel. Cycle through the options until your desired format is displayed.
USB заряддоо порту
The clock is equipped with a USB charging port on its back, allowing you to charge compatible devices such as smartphones. The maximum output for this port is 5V 1A.
Image: The clock displaying time, temperature, and humidity, with a smartphone charging from its USB port.
Техникалык тейлөө
- Clean the clock's surface with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Ensure the USB cable and power adapter are in good condition.
- If using batteries, replace them when the display becomes dim or unresponsive (when not connected to USB power).
- Саатты өтө жогорку температурага, түз күн нуруна же жогорку нымдуулукка дуушар кылбаңыз.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Display is off or very dim. | Not connected to USB power, or batteries are low/dead. | Connect the clock to a USB power source for continuous display. If using batteries, replace them. Adjust brightness with the rolling button. |
| Ойготкуч угулбайт. | Ойготкуч иштетилген эмес же туура эмес орнотулган. | Ensure the alarm indicator (1 or 2) is visible on the display. Re-check alarm time settings. |
| Убакыт/дата туура эмес. | Time/Date was not set or reset due to power interruption. | Баштапкы абалга келтирүү үчүн "Убакытты жана датаны орнотуу" көрсөтмөлөрүн аткарыңыз. |
| USB заряддоо порту иштебей жатат. | Device not properly connected or power source insufficient. | Ensure the clock is connected to a stable USB power source. Check the charging cable of the device you are trying to charge. |
Техникалык шарттар
| Бренд | mooas |
| Модель номери | MC-M3 |
| Дисплей түрү | Digital LED |
| Power Source | Corded Electric (USB DC 5V) / 3 x AAA Batteries (not included) |
| USB чыгышы | 5V 1А (Max) |
| Продукциянын өлчөмдөрү | Туурасы 8" x Бийиктиги 4" (туурасы 20.32 см x бийиктиги 10.16 см) |
| Элемент Салмагы | 6 унция (170.1 грамм) |
| Материал | Акрилонитрил бутадиен стирол (ABS) |
| Өзгөчөлүктөр | Dual Alarm, Snooze, Brightness Adjustment, 12/24H Mode, Temperature (°C/°F) & Humidity Display, Mirror Display |
Image: The mooas MC-M3 clock in its three available colors, illustrating its compact size.
Кепилдик жана колдоо
Specific warranty information is not provided in the product details. For support or warranty inquiries, please contact mooas customer service through their official webпродукт сатылып алынган сайт же сатуучу.
