Duronic MF500 Automatic Electric Milk Frother User Manual

Introduction

Thank you for choosing the Duronic MF500 Automatic Electric Milk Frother. This appliance is designed to help you create a variety of delicious milk-based beverages, from frothy cappuccinos and lattes to warm hot chocolates and cold foam for iced coffees. Please read this manual carefully before use to ensure safe and optimal operation.

Image: The Duronic MF500 Milk Frother preparing various hot and cold beverages.

Жайгашуу

1. Таңгактан чыгаруу жана текшерүү

• Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
• Verify that all parts are present: main base unit, stainless steel jug, transparent lid, frothing whisk, and heating whisk.
• Шаймандын бузулуу белгилерин текшериңиз. Бузулган болсо, колдонбоңуз.

2. Алгачкы тазалоо

• Before first use, wash the stainless steel jug, lid, and whisks with warm, soapy water. Rinse thoroughly and dry completely.
• Негизги базалык блоктун сыртын жарнама менен сүртүңүзamp кездеме. Негизги блокту сууга батырбаңыз.

3. Компонентти идентификациялоо

Image: Diagram illustrating the dimensions and key components of the Duronic MF500.

The appliance consists of a main power base and a removable stainless steel jug. The jug has a handle and a transparent lid. Two types of whisks are provided: one for frothing and one for heating milk without frothing. These whisks can be stored conveniently under the base unit.

Иштөө нускамалары

1. Choosing the Whisk

• Frothing Whisk: Use the whisk with the coil for creating hot or cold milk foam.
• Heating Whisk: Use the whisk without the coil for heating milk without frothing (e.g., for hot chocolate).

Place the desired whisk securely onto the shaft at the bottom of the stainless steel jug.

Image: Interior of the jug showing maximum fill lines for frothing (260ml) and heating (500ml).

2. Filling Milk

• Pour milk into the stainless steel jug. Observe the internal MAX fill lines:
• үчүн көбүктүү (hot or cold foam), do not exceed the lower MAX line (approximately 260 ml) to prevent overflow.
• үчүн сүт жылытуу (without frothing), do not exceed the upper MAX line (approximately 500 ml).
• For best results, use cold, fresh milk. Plant-based or semi-skimmed milk is recommended for optimal frothing.

3. Selecting Mode and Operation

• Place the jug onto the power base. Ensure it is seated correctly.
• Place the transparent lid on the jug.
• Press the single control button on the front of the base unit to cycle through the modes:
• Short press (once): Hot frothing (red indicator light, approx. 65°C). Ideal for cappuccinos and lattes.
• Short press (twice): Hot milk (blue indicator light, approx. 80°C). Ideal for hot chocolate.
• Узак басуу (болжол менен 2 секунд): Cold frothing (blue indicator light flashes). Ideal for iced coffees.
• The appliance will automatically stop when the selected temperature is reached or the cycle is complete.

Image: The control panel with indicator lights for hot frothing, hot milk, and cold frothing, along with approximate preparation times.

Сүрөт: Мисamples of beverages prepared with the frother, such as cappuccino and hot chocolate.

Image: Visual representation of the frother's hot and cold temperature capabilities.

Тейлөө жана тазалоо

1. Cleaning the Jug and Whisks

• Always unplug the base unit before cleaning.
• Immediately after each use, remove the jug from the base.
• Wash the stainless steel jug, lid, and whisks with warm, soapy water. The non-porous design of the stainless steel helps prevent odors and bacteria.
• Rinse thoroughly under running water and dry completely with a soft cloth.
• Do not use abrasive cleaners, metal scouring pads, or harsh detergents, as these can damage the surface.

Image: Hand-washing the removable stainless steel jug for easy cleaning.

2. Cleaning the Base Unit

• Негизги блоктун сыртын жумшак, г менен сүртүңүзamp кездеме.
• Негизги блокту эч качан сууга же башка суюктукка салбаңыз.
• Ensure the power connector area is dry before plugging in.

3. Сактоо

• Шайманды колдонбогондо таза, кургак жерде сактаңыз.
• The whisks can be stored conveniently under the base unit to prevent loss.

Проблемаларды чечүү

If you encounter issues with your Duronic MF500, please refer to the following common problems and solutions:

• Шайман күйбөйт:
  • Электр шнурунун иштеген электр розеткасына бекем сайылганын текшериңиз.
  • Күч бар-жогун текшериңизtagже автоматтык өчүргүчтүн иштебей калышы.
• Milk is not frothing or heating properly:
  • Verify that the correct whisk is installed for your desired function (frothing whisk for foam, heating whisk for hot milk).
  • Ensure the milk level is within the specified MAX lines for frothing (260 ml) or heating (500 ml). Overfilling or underfilling can affect performance.
  • Use cold, fresh milk. Different types of milk (e.g., full-fat, skimmed, plant-based) can produce varying results. Semi-skimmed or plant-based milks often yield the best foam.
  • Ensure the jug is clean and free from residue, which can interfere with whisk rotation.
• Milk overflows during operation:
  • You may have exceeded the maximum fill line for frothing (260 ml). Always adhere to the indicated fill levels.
• Иш учурунда адаттан тыш ызы-чуу:
  • Ensure the whisk is properly seated on the shaft at the bottom of the jug.
  • Check for any foreign objects in the jug.

Бул чечимдерди колдонуу аракетинен кийин көйгөй чечилбесе, кардарларды колдоо кызматына кайрылыңыз.

Техникалык шарттар

Кепилдик маалымат

Specific warranty details for the Duronic MF500 Milk Frother are typically provided with the product packaging or can be found on the official Duronic webсайт. Сураныч, кепилдик дооматтар үчүн сатып алуу далилиңизди сактап коюңуз.

Кардарларды колдоо

For further assistance, technical support, or inquiries regarding your Duronic MF500 Milk Frother, please visit the official Duronic webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Байланыш маалыматы, адатта, продуктунун таңгагында же өндүрүүчүнүн дарегинде тапса болот webсайт.